FprEN 3660-033

Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 033: Stainless steel banding band, style Z, for attachment of individual and/or overall screens to cable outlets - Product standard

Luft- und Raumfahrt - Endgehäuse für elektrische und optische Rund- und Rechtecksteckverbinder - Teil 033: Edelstahlspannband, Bauform Z, zum Anschluss von Einzel- und/oder Gesamtschirmen an Endgehäusen - Produktnorm

Série aérospatiale - Accessoires arrière pour connecteurs circulaires et rectangulaires électriques et optiques - Partie 033 : Bande de cerclage en acier inoxydable, type Z, pour fixation des blindages individuels et/ou complets aux raccords - Norme de produit

Le présent document spécifie une bande de cerclage, de type Z, pour la fixation des blindages de câbles individuels ou complets aux raccords. Les bandes livrées à l’état à plat F (voir Article 6) nécessitent d’être enroulées en double épaisseur avant installation. Les bandes livrées à l’état C (voir Article 6) sont pré-enroulées en double en usine et prêtes à être installées.Le présent document spécifie une bande de cerclage, de type Z, pour la fixation des blindages de câbles individuels ou complets aux raccords. Les bandes livrées à l’état à plat F (voir Article 6) nécessitent d’être enroulées en double épaisseur avant installation. Les bandes livrées à l’état C (voir Article 6) sont pré-enroulées en double en usine et prêtes à être installées.

Aeronavtika - Dodatki za okrogle in pravokotne električne in optične konektorje - 033. del: Nerjavni jekleni ovijalni pas, vrsta Z, za pritrjevanje posameznih in/ali celotnih zaslonov na kabelske izvode - Standard za proizvod

General Information

• Status: Not Published
• Publication Date: 21-Dec-2023
• ICS: 49.060 - Aerospace electric equipment and systems
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 2/S 3 - Elements of Connection (Connectors, Contacts, rear accessories, crimping tools
• Ref Project: kSIST FprEN 3660-033:2023 - Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 033: stainless steel banding band, style Z, for attachment of individual and /or overall screens to cable outlets - Product standard

Relations

• Revises: EN 3660-033:2019 - Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 033: Stainless steel banding band, style Z, for attachment of individual and/or overall screens to cable outlets - Product standard
• Effective Date: 26-Feb-2020

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 3660-033:2022
01-september-2022
Aeronavtika - Dodatki za okrogle in pravokotne električne in optične konektorje -
033. del: Nerjavni jekleni ovijalni pas, vrsta Z, za pritrjevanje posameznih in/ali
celotnih zaslonov na kabelske izvode - Standard za proizvod
Aerospace series - Cable outlet accessories for circular and rectangular electrical and
optical connectors - Part 033: stainless steel banding band, style Z, for attachment of
individual and /or overall screens to cable outlets - Product standard
Luft- und Raumfahrt - Endgehäuse für elektrische und optische Rund- und
Rechtecksteckverbinder - Teil 033: Edelstahlspannband, Bauform Z, zum Anschluss von
Einzel- und/oder Gesamtschirmen an Endgehäusen - Produktnorm
Série aérospatiale - Accessoires arrière pour connecteurs circulaires et rectangulaires
électriques et optiques - Partie 033 : Bande de cerclage en acier inoxydable, type Z,
pour fixation des blindages individuels et/ou complets aux raccords - Norme de produit
Ta slovenski standard je istoveten z: prEN 3660-033
ICS:
31.220.10 Vtiči in vtičnice, konektorji Plug-and-socket devices.
Connectors
49.060 Letalska in vesoljska Aerospace electric
električna oprema in sistemi equipment and systems
oSIST prEN 3660-033:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

oSIST prEN 3660-033:2022
oSIST prEN 3660-033:2022
DRAFT
EUROPEAN STANDARD
prEN 3660-033
NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2022
ICS 49.060 Will supersede EN 3660-033:2019
English Version
Aerospace series - Cable outlet accessories for circular and
rectangular electrical and optical connectors - Part 033:
stainless steel banding band, style Z, for attachment of
individual and /or overall screens to cable outlets -
Product standard
Série aérospatiale - Accessoires arrière pour Luft- und Raumfahrt - Endgehäuse für elektrische und
connecteurs circulaires et rectangulaires électriques et optische Rund- und Rechtecksteckverbinder - Teil 033:
optiques - Partie 033 : Bande de cerclage en acier Edelstahlspannband, Bauform Z, zum Anschluss von
inoxydable, type Z, pour fixation des blindages Einzel- und/oder Gesamtschirmen an Endgehäusen -
individuels et/ou complets aux raccords - Norme de Produktnorm
produit
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee ASD-
STAN.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 3660-033:2022 E
worldwide for CEN national Members.

oSIST prEN 3660-033:2022
prEN 3660-033:2022 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Characteristics . 5
4.1 Materials . 5
4.2 Dimensions and mass . 5
4.3 Delivery condition . 5
4.4 Installation tools . 7
5 Tests . 8
5.1 Tests and requirements . 8
5.2 Special tests . 11
5.3 Quality assurance . 12
5.3.1 Qualification tests . 12
5.3.2 Preparation of specimens . 12
6 Designation . 13
7 Marking . 13
8 Technical specification . 13
Annex A (informative) Standard evolution form . 14
Bibliography . 15

oSIST prEN 3660-033:2022
prEN 3660-033:2022 (E)
European foreword
This document (prEN 3660-033:2022) has been prepared by the Aerospace and Defence Industries
Association of Europe — Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this document has
received the approval of the National Associations and the Official Services of the member countries of
ASD-STAN, prior to its presentation to CEN.
This document is currently submitted to the CEN Enquiry.
This document will supersede EN 3660-033:2019.
oSIST prEN 3660-033:2022
prEN 3660-033:2022 (E)
1 Scope
This document defines a banding band, style Z, for terminating individual and/or overall cable screens
to cable outlets. The bands delivered in flat condition F (see Clause 6) which need to be double wrapped
prior to their installation. The bands delivered in condition C (see Clause 6) are factory pre-double
wrapped and ready for installation.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
1),
EN 2591 (all parts), Aerospace series — Elements of electrical and optical connection — Test
methods
EN 3660-001, Aerospace series - Cable outlet accessories for circular and rectangular electrical and
optical connectors - Part 001: Technical specification
EN 3660-063, Aerospace series - Cable outlet accessories for circular and rectangular electrical and
optical connectors - Part 063: Cable outlet, style K, straight, for heat shrinkable boot, shielded, sealed, self-
locking - Product standard
A-A-59569, Braid, wire (copper, tin-coated, silver-coated, or nickel-coated, tubular or flat) )
SAE AS 81306/1, Band installation tool, hand, one-step, for AS85049/128 connector accessory cable shield
...