EN 3973:2006

Aerospace series - Steel FE-CM3801 (X5CrNiCuNb16-4) - Homogenized, solution treated and precipitation hardened - Investment casting - De ≤ 50 mm - Rm ≥ 1 030 MPa

This standard specifies the requirements relating to:
Steel FE-CM3801 (X5CrNiCuNb16-4)
Homogenized, solution treated and precipitation hardened
Investment casting
De £ 50 mm
Rm ³ 1 030 MPa
for aerospace applications.

Luft- und Raumfahrt - Stahl FE-CM3801 (X5CrNiCuNb16-4) - Diffusionsgeglüht, lösungsgeglüht und ausgelagert - Feingussstücke - De = 50 mm - Rm = 1 030 MPa

Série aérospatiale - Acier FE-CM3801 (X5CrNiCuNb16-4) - Homogénéisé, mis en solution et durci par précipitation - Pièces moulées en cire perdue - De = 50 mm - Rm = 1 030 MPa

Diese Norm legt die Anforderungen an
Stahl FE-CM3801 (X5CrNiCuNb16-4)
Diffusionsgeglüht, lösungsgeglüht und ausgelagert
Feingussstücke
De  50 mm
Rm ≥ 1 030 MPa
für die Anwendung in der Luft  und Raumfahrt fest.

Aeronavtika - Jeklo FE-CM3801 (X5CrNiCuNb16-4) - Homogenizirani, obdelani v raztopini in utrjeni - Ulitki - De ≤ 50 mm - Rm ≥ 1030 MPa

General Information

• Status: Published
• Publication Date: 19-Dec-2006
• Withdrawal Date: 29-Jun-2007
• ICS: 49.025.10 - Steels
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 4 - Metallic
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Completion Date: 01-Jun-2017
• Ref Project: SIST EN 3973:2009 - Aerospace series - Steel FE-CM3801 (X5CrNiCuNb16-4) - Homogenized, solution treated and precipitation hardened - Investment casting - De ≤ 50 mm - Rm ≥ 1 030 MPa

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Luft- und Raumfahrt - Stahl FE-CM3801 (X5CrNiCuNb16-4) - Diffusionsgeglüht, lösungsgeglüht und ausgelagert - Feingussstücke - De = 50 mm - Rm = 1 030 MPaSérie aérospatiale - Acier FE-CM3801 (X5CrNiCuNb16-4) - Homogénéisé, mis en solution et durci par précipitation - Pièces moulées en cire perdue - De = 50 mm - Rm = 1 030 MPa49.025.10JeklaSteelsICS:Ta slovenski standard je istoveten z:EN 3973:2006SIST EN 3973:2009en,de01-maj-2009SIST EN 3973:2009SLOVENSKI
STANDARD



SIST EN 3973:2009



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 3973
December 2006 ICS 49.025.10 English Version
Aerospace series - Steel FE-CM3801 (X5CrNiCuNb16-4) - Homogenized, solution treated and precipitation hardened - Investment casting - De ≤ 50 mm - Rm ≥ 1 030 MPa
Série aérospatiale - Acier FE-CM3801 (X5CrNiCuNb16-4) -Homogénéisé, mis en solution et durci par précipitation - Pièces moulées en cire perdue - De ≤ 50 mm - Rm ≥1 030 MPa
Luft- und Raumfahrt - Stahl FE-CM3801 (X5CrNiCuNb16-4) - Homogenisiet, lösungsgeglüht und ausgelagert - Feingußstücke durch Wachsausschmelzverfahren - De ≤ 50 mm - Rm ≥ 1 030 MPa This European Standard was approved by CEN on 18 October 2006.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36
B-1050 Brussels © 2006 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 3973:2006: ESIST EN 3973:2009



EN 3973:2006 (E) 2 Foreword This document (EN 3973:2006) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2007, and conflicting national standards shall be withdrawn at the latest by June 2007. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. SIST EN 3973:2009



EN 3973:2006 (E) 3 Introduction This standard is part of the series of EN metallic material standards for aerospace applications. The general organization of this series is described in EN 4258. This standard has been prepared in accordance with EN 4500-5. 1 Scope This standard specifies the requirements relating to: Steel FE-CM3801 (X5CrNiCuNb16-4) Homogenized, solution treated and precipitation hardened Investment casting De ≤ 50 mm Rm ≥ 1 030 MPa for aerospace applications. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 2103-3, Aerospace series — Steel, nickel base and cobalt base alloy remelting stock and castings — Technical specification — Part 3 — Pre-production and production castings. EN 3484, Aerospace series — Steel FE-CM61 — As cast — Reference heat treatment: homogenised, solution treated, precipitation hardened and sub zero — Re
...