prEN 17964
(Main)Low height mobile working platform - Materials, dimensions, design loads, safety and performance requirements
Low height mobile working platform - Materials, dimensions, design loads, safety and performance requirements
This European Standard applies to the design of small mobile access and working platforms (S-MAT):
- with wheels- for assembly and use by one person- with no more than one platform level
- made of prefabricated elements with dimensions which are fixed by the design
- with a platform height limited by the design up to 2,0m. S-MATs can be used indoors and outdoors.
S-MATS can be removed immediately in case of arising wind greater than an equivalent dynamic pressure 0.1kN/m2 or at the end of the work shift.This document:
- gives dimensional requirements and
- safety and performance requirements.
This product standard does not apply to:
- scaffolds according to EN 12810-1 and EN 12811-1
- mobile access towers according to EN 1004-1
- mobile ladders with platform according to EN 131-7
- ladders with separate platform according to EN 131-8
where different load assumptions and verification methods are applied.
Kleine fahrbare Arbeitsbühnen - Werkstoffe, Maße, Lastannahmen und sicherheitstechnische Anforderungen
Plateforme de travail mobile de faible hauteur - Matériaux, dimensions, charges de calcul, exigences de sécurité et de performance
Premična delovna ploščad z majhno višino - Materiali, mere, konstrukcijske obremenitve, varnostne in izvedbene zahteve
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN 17964:2023
01-julij-2023
Premična delovna ploščad z majhno višino - Materiali, mere, konstrukcijske
obremenitve, varnostne in izvedbene zahteve
Low height mobile working platform - Materials, dimensions, design loads, safety and
performance requirements
Kleine fahrbare Arbeitsbühnen - Werkstoffe, Maße, Lastannahmen und
sicherheitstechnische Anforderungen
Plateforme de travail mobile de faible hauteur - Matériaux, dimensions, charges de
calcul, exigences de sécurité et de performance
Ta slovenski standard je istoveten z: prEN 17964
ICS:
91.220 Gradbena oprema Construction equipment
oSIST prEN 17964:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 17964:2023
---------------------- Page: 2 ----------------------
oSIST prEN 17964:2023
DRAFT
EUROPEAN STANDARD
prEN 17964
NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2023
ICS
English Version
Low height mobile working platform - Materials,
dimensions, design loads, safety and performance
requirements
Kleine fahrbare Arbeitsbühnen
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 53.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 17964:2023 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 17964:2023
prEN 17964:2023 (E)
Contents
European foreword . 4
Introduction . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 7
4 Classification . 8
5 Designation . 8
6 Materials. 9
7 General requirements . 9
8 Requirements for access to the platform . 10
8.1 Introduction . 10
8.2 General access requirements . 10
8.3 Methods of access to the platform .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.