EN 15681-1:2016
(Main)Glass in building - Basic alumino silicate glass products - Part 1: Definitions and general physical and mechanical properties
Glass in building - Basic alumino silicate glass products - Part 1: Definitions and general physical and mechanical properties
This Part of this European Standard specifies and classifies basic alumino silicate glass products, indicates their chemical composition, their main physical and mechanical characteristics, their dimensional and their minimum quality requirements (in respect of optical and visual faults).
This European Standard applies to basic alumino silicate glasses supplied in stock sizes, supplied sizes or in cut sizes for final end use.
This European Standard does not apply to final cut sizes having a dimension less than 100 mm or a surface area less than 0,05 m2.
Glas im Bauwesen - Basiserzeugnisse aus Alumo-Silicatglas - Teil 1: Definitionen und allgemeine physikalische und mechanische Eigenschaften
Dieser Teil der Europäischen Norm legt Basiserzeugnisse aus Alumo-Silicatglas fest, klassifiziert sie und gibt deren chemische Zusammensetzung, deren wichtigste physikalischen und mechanischen Eigenschaften sowie deren Maße und Mindestanforderungen an die Qualität (in Hinsicht auf optische und sichtbare Fehler) an.
Die vorliegende Europäische Norm gilt für Basiserzeugnisse aus Alumo-Silicatglas in Standardabmessungen, Liefermaßen oder in Festmaßen für die Endanwendung.
Diese Europäische Norm gilt nicht für Festmaße mit einem Maß kleiner als 100 mm oder mit einer Oberfläche von weniger als 0,05 m2.
Verre dans la construction - Produits de base : verre aluminosilicate - Partie 1 : Définitions et propriétés physiques et mécaniques générales
La présente partie de cette Norme européenne spécifie et classe les produits verriers aluminosilicate de base et indique leur composition chimique, leurs principales caractéristiques physiques et mécaniques, ainsi que les exigences dimensionnelles et les exigences de qualité minimales (au regard des défauts optiques et visuels) qui s’y appliquent.
La présente Norme européenne s’applique aux verres aluminosilicates de base fournis aux mesures de stockage, aux mesures livrées ou aux mesures découpées pour l’utilisation finale.
La présente Norme européenne ne s’applique pas aux mesures découpées finales inférieures à 100 mm, ni aux superficies inférieures à 0,05 m2.
Steklo v gradbeništvu - Osnovni proizvodi iz aluminij-silikatnega stekla - 1. del: Definicije in splošne fizikalne in mehanske lastnosti
Ta del tega evropskega standarda določa in razvršča osnovne proizvode iz aluminij-silikatnega stekla, navaja njihovo kemično sestavo, njihove glavne fizikalne in mehanske lastnosti ter določa zahteve glede njihovih mer in minimalne kakovosti (v zvezi z optičnimi in vizualnimi napakami).
Ta evropski standard se uporablja za osnovne proizvode iz aluminij-silikatnega stekla, dobavljene v velikostih na zalogi, dobavljenih velikostih in velikostih razreza za končno uporabo.
Ta evropski standard ne zajema končnih velikosti razreza z merami manj kot 100 mm ali površino, manjšo od 0,05 m².
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Steklo v gradbeništvu - Osnovni proizvodi iz aluminij-silikatnega stekla - 1. del: Definicije in splošne fizikalne in mehanske lastnostiGlas im Bauwesen - Basiserzeugnisse aus Alumo-Silicatglas - Teil 1: Definitionen und allgemeine physikalische und mechanische EigenschaftenVerre dans la construction - Produits de base : verre aluminosilicate - Partie 1 : Définitions et propriétés physiques et mécaniques généralesGlass in building - Basic alumino silicate glass products - Part 1: Definitions and general physical and mechanical properties81.040.20Steklo v gradbeništvuGlass in buildingICS:Ta slovenski standard je istoveten z:EN 15681-1:2016SIST EN 15681-1:2016en,fr,de01-junij-2016SIST EN 15681-1:2016SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 15681-1
January
t r s x ICS
z sä r v rä t r English Version
Glass in building æ Basic alumino silicate glass products æ Part
sã Definitions and general physical and mechanical properties Verre dans la construction æ Produits de base ã verre aluminosilicate æ Partie
s ã Définitions et propriétés physiques et mécaniques générales
Glas im Bauwesen æ Basiserzeugnisse aus AlumoæSilicatglas æ Teil
sã Definitionen und allgemeine physikalische und mechanische Eigenschaften This European Standard was approved by CEN on
u r November
t r s wä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey andUnited Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels
t r s x CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
s w x z sæ sã t r s x ESIST EN 15681-1:2016
Complementary information related to REACH . 16 Bibliography . 17
1 Standard under development. SIST EN 15681-1:2016
Key I direction of draw H length B width Figure 1 — Relationship between length, width and direction of draw 3.6 stock sizes glass delivered in manufacturers standard stock sizes 3.7 supplied size pane of glass that has been supplied either as raw material for further processing and/or cutting down to a size for installation Note 1 to entry: This is a size that is outside the stock size. 3.8 final cut size pane of glass that has been cut down to the dimensions being required either for installation or processing into a final product Note 1 to entry: Examples of processed final products are insulating glass units and thermally toughened safety glass of those dimensions. 3.9 optical fault fault which leads to distortions in the appearance of objects observed through the glass 3.10 visual fault fault which alters the visual quality of the glass Note 1 to entry: Visual faults include spot faults and linear / extended faults. 3.11 spot fault spherical or quasi spherical fault which is produced by differing mechanisms, e.g. gaseous inclusion, solid inclusion, mark or deposit of small size 3.12 linear / extended faults fault which can be on or in the glass, in the form of deposits, reams, marks or scratches that occupy an extended length or area SIST EN 15681-1:2016
32,1 % to 51,3 % Lithium (Li) 0 % to 3,7 % Sodium (Na) 0 % to 10,5 % Calcium (Ca) 0 % to 2,1 % Magnesium (Mg) 0 % to 5 % Zinc (Zn) 0 % to 2,4 % Potassium (K) 0 % to 7 % Zirconium (Zr) 0 % to 3,0 % Strontium (Sr) 0 % to 2,5 % Barium (Ba) 0 % to 3,6 % Other componentsa 0 % to 5 % a Properties other than photometric characteristics shall not be significantly altered by these other components 4.2 Tint Body tinted glass is obtained by the addition of suitable materials. 5 Physical and mechanical characteristics 5.1 General characteristics Conventional numerical values for t
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.