EN 3475-415:2005
(Main)Aerospace series - Cables, electrical, aircraft use - Test methods - Part 415: Rapid change of temperature
Aerospace series - Cables, electrical, aircraft use - Test methods - Part 415: Rapid change of temperature
This product standard defines a test method to evaluate the performance of a coaxial cable after exposure to a rapid change of temperature.
It shall be used together with EN 3475-100.
Luft- und Raumfahrt - Elektrische Leitungen für Luftfahrtverwendung - Prüfverfahren - Teil 415: Schneller Temperaturwechsel
Diese Produktnorm legt ein Prüfverfahren zur Bewertung der Leistung einer koaxialen Leitung fest, die schnellen Temperaturwechseln ausgesetzt wurde.
Sie ist in Verbindung mit EN 3475 100 anzuwenden.
Série aérospatiale - Câbles électriques à usage aéronautique - Méthodes d'essais - Partie 415 : Variation rapide de température
Aeronavtika – Električni kabli za uporabo v zračnih plovilih – Preskusne metode – 415. del: Hitre temperaturne spremembe
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aerospace series - Cables, electrical, aircraft use - Test methods - Part 415: Rapid change of temperatureSérie aérospatiale - Câbles électriques a usage aéronautique - Méthodes d'essais - Partie 415 : Variation rapide de températureLuft- und Raumfahrt - Elektrische Leitungen für Luftfahrtverwendung - Prüfverfahren - Teil 415: Schneller TemperaturwechselTa slovenski standard je istoveten z:EN 3475-415:2005SIST EN 3475-415:2006en49.060ICS:SLOVENSKI
STANDARDSIST EN 3475-415:200601-julij-2006
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 3475-415October 2005ICS 49.060 English VersionAerospace series - Cables, electrical, aircraft use - Testmethods - Part 415: Rapid change of temperatureSérie aérospatiale - Câbles électriques à usageaéronautique - Méthodes d'essais - Partie 415 : Variationrapide de températureLuft- und Raumfahrt - Elektrische Leitungen fürLuftfahrtverwendung - Prüfverfahren - Teil 415: SchnellerTemperaturwechselThis European Standard was approved by CEN on 12 September 2005.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2005 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 3475-415:2005: E
EN 3475-415:2005 (E) 2 Contents Page Foreword.3 1 Scope.4 2 Normative references.4 3 Preparation of specimens.4 4 Test method and requirements.5 5 Requirements.6
EN 3475-415:2005 (E) 3 Foreword This European Standard (EN 3475-415:2005) has been prepared by the European Association of Aerospace Manufacturers - Standardization (AECMA-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has receive
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.