EN 4045:2001

Aerospace series - Capillary tubes, seamless in heat resisting alloys - Diameter 0,6 mm <= D <= 2 mm - Dimensions

This standard specifies the dimensions and tolerances of:
Capillary tubes, seamless
in heat resisting alloys
Diameter 0,6 mm £ D £ 2 mm
for aerospace applications.

Luft- und Raumfahrt - Kapillarrohre, nahtlos aus hochwarmfesten Legierungen - Durchmesser 0,6 mm = D = 2 mm - Maße

Diese Norm legt die Maße und Toleranzen von:
Kapillarrohren, nahtlos
aus hochwarmfesten Legierungen
Durchmesser 0,6 mm = D = 2 mm
für Anwendungen in der Luft- und Raumfahrt fest.

Série aérospatiale - Tubes capillaires, sans soudure en alliages résistant à chaud - Diamètres 0,6 mm <= D <= 2 mm - Dimensions

Aerospace series - Capillary tubes, seamless in heat resisting alloys - Diameter 0,6 mm <= D <= 2 mm - Dimensions

General Information

• Status: Published
• Publication Date: 18-Sep-2001
• Withdrawal Date: 30-Mar-2002
• ICS: 49.080 - Aerospace fluid systems and components
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 4 - Metallic
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Completion Date: 01-Jun-2017
• Ref Project: SIST EN 4045:2002 - Aerospace series - Capillary tubes, seamless in heat resisting alloys - Diameter 0,6 mm <= D <= 2 mm - Dimensions

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aerospace series - Capillary tubes, seamless in heat resisting alloys - Diameter 0,6 mm <= D <= 2 mm - DimensionsLuft- und Raumfahrt - Kapillarrohre, nahtlos aus hochwarmfesten Legierungen - Durchmesser 0,6 mm = D = 2 mm - MaßeSérie aérospatiale - Tubes capillaires, sans soudure en alliages résistant a chaud - Diametres 0,6 mm <=
D <=
2 mm - DimensionsAerospace series - Capillary tubes, seamless in heat resisting alloys - Diameter 0,6 mm <=
D <=
2 mm - Dimensions49.080Aerospace fluid systems and componentsICS:Ta slovenski standard je istoveten z:EN 4045:2001SIST EN 4045:2002en01-januar-2002SIST EN 4045:2002SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 4045September 2001ICS 49.080English versionAerospace series - Capillary tubes, seamless in heat resistingalloys - Diameter 0,6 mm
D
2 mm - DimensionsSérie aérospatiale - Tubes capillaires, sans soudure enalliages résistant à chaud - Diamètres 0,6 mm
D
2 mm- DimensionsLuft- und Raumfahrt - Kapillarrohre, nahtlos aushochwarmfesten Legierungen - Durchmesser 0,6 mm
D 2 mm - MaßeThis European Standard was approved by CEN on 2 May 2001.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2001 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 4045:2001 ESIST EN 4045:2002
...