EN ISO 17989-1:2015

Tractors and machinery for agriculture and forestry - Sustainability - Part 1: Principles (ISO 17989-1:2015)

ISO 17989-1:2015 provides guidelines to assist designers and manufacturers of tractors and machinery for agriculture and forestry to integrate sustainability principles, practices and considerations into their organizations and processes. This part of ISO 17989 is specifically applicable to equipment used in the production of food, fibres, fuel and lumber for humans and livestock.
NOTE          This part of ISO 17989 includes three different levels for the application: principles, recommendations and additional information (annexes).
ISO 17989-1:2015 is addressed to the organization management and provides guidance for considering sustainability aspects relevant for the organization and the product life cycle. It defines the factory gate as the system boundary (Figure 1).
ISO 17989-1:2015 is not applicable to contractual or regulatory purposes or to registration and certification.
Except when they are closely related to sustainability, this part of ISO 17989 does not address issues of occupational health and safety or operator safety aspects of a machine's design. Designers can find guidance on these issues in other International Standards.

Traktoren und Land- und Forstmaschinen - Nachhaltigkeit - Teil 1: Grundsätze (ISO 17989-1:2015)

Tracteurs et matériels agricoles et forestiers - Durabilité - Partie 1: Principes (ISO 17989-1:2015)

ISO 17989-1:2015 propose des lignes directrices visant à aider les concepteurs et les fabricants de tracteurs et de matériels agricoles et forestiers à intégrer les principes du développement durable ainsi que les pratiques et considérations associées dans leurs organisations et processus. La présente partie de l'ISO 17989 est spécifiquement applicable aux équipements utilisés dans la production d'aliments, de fibres, de combustibles et de bois pour les hommes et le bétail.
NOTE          La présente partie de l'ISO 17989 comprend trois niveaux d'application différents: les principes, les recommandations et les informations supplémentaires (annexes).
ISO 17989-1:2015 s'adresse à la direction de l'organisation et fournit des lignes directrices pour prendre en compte les aspects du développement durable pertinents pour l'organisation et le cycle de vie du produit. Elle définit la porte de l'usine comme limite du système (Figure 1).
ISO 17989-1:2015 n'est pas applicable à des fins contractuelles ou réglementaires, ni à des fins d'enregistrement ou de certification.
ISO 17989-1:2015 ne traite pas des questions relatives à la sécurité et à la santé au travail, ni des aspects de la conception d'une machine qui concernent la sécurité de l'opérateur, excepté ceux qui sont étroitement liés à la durabilité. Les concepteurs peuvent trouver des conseils sur ces questions dans d'autres Normes internationales.

Traktorji ter kmetijski in gozdarski stroji - Trajnost - 1. del: Načela (ISO 17989-1:2015)

Ta standard določa izraze, definicije in načela, ki omogočajo pregled vidikov trajnosti, ki so povezani z izdelavo in izdelkom (strojem) v povezavi z vsemi stroji, ki so zajeti v standardu TC 144. Cilj je zagotoviti skupen in konsistenten pristop za vsa področja standarda TC 144 in smernice za razvoj standardov za posamezne izdelke.

General Information

• Status: Published
• Publication Date: 22-Dec-2015
• Withdrawal Date: 29-Jun-2016
• ICS: 65.060.01 - Agricultural machines and equipment in general
• Technical Committee: CEN/TC 144 - Tractors and machinery for agriculture and forestry
• Drafting Committee: CEN/TC 144/WG 1 - General safety requirements
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 23-Dec-2015
• Completion Date: 23-Dec-2015
• Ref Project: SIST EN ISO 17989-1:2016 - Tractors and machinery for agriculture and forestry - Sustainability - Part 1: Principles (ISO 17989-1:2015)

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 17989-1:2016
01-marec-2016
7UDNWRUMLWHUNPHWLMVNLLQJR]GDUVNLVWURML7UDMQRVWGHO1DþHOD,62

Tractors and machinery for agriculture and forestry - Sustainability - Part 1: Principles
(ISO 17989-1:2015)
Traktoren und Land- und Forstmaschinen - Nachhaltigkeit - Teil 1: Grundsätze (ISO
17989-1:2015)
Tracteurs et matériels agricoles et forestiers - Durabilité - Partie 1: Principes (ISO 17989-
1:2015)
Ta slovenski standard je istoveten z: EN ISO 17989-1:2015
ICS:
65.060.01 Kmetijski stroji in oprema na Agricultural machines and
splošno equipment in general
SIST EN ISO 17989-1:2016 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 17989-1:2016

---------------------- Page: 2 ----------------------

SIST EN ISO 17989-1:2016


EN ISO 17989-1
EUROPEAN STANDARD

NORME EUROPÉENNE

December 2015
EUROPÄISCHE NORM
ICS 65.060.01
English Version

Tractors and machinery for agriculture and forestry -
Sustainability - Part 1: Principles (ISO 17989-1:2015)
Tracteurs et matériels agricoles et forestiers - Traktoren und Land- und Forstmaschinen -
Durabilité - Partie 1: Principes (ISO 17989-1:2015) Nachhaltigkeit - Teil 1: Grundsätze (ISO 17989-1:2015)
This European Standard was approved by CEN on 21 November 2015.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 17989-1:2015 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 17989-1:2016
EN ISO 17989-1:2015 (E)
Contents Page
European foreword . 3
2

---------------------- Page: 4 ----------------------

SIST EN ISO 17989-1:2016
EN ISO 17989-1:2015 (E)
European foreword
This document (EN ISO 17989-1:2015) has been prepared by Technical Committee ISO/TC 23 "Tractors
and machinery for agriculture and forestry" in collaboration with Technical Committee CEN/TC 144
“Tractors and machinery for agriculture and forestry” the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by June 2016, and conflicting national standards shall be
withdrawn at the latest by June 2016.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent
rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 17989-1:2015 has been approved by CEN as EN ISO 17989-1:2015 without any
modification.


3

---------------------- Page: 5 ----------------------

SIST EN ISO 17989-1:2016

---------------------- Page: 6 ----------------------

SIST EN ISO 17989-1:2016
INTERNATIONAL ISO
STANDARD 17989-1
First edition
2015-12-01
Tractors and machinery for
agriculture and forestry —
Sustainability —
Part 1:
Prin
...