EN 352-1:2020
(Main)Hearing protectors - General requirements - Part 1: Earmuffs
Hearing protectors - General requirements - Part 1: Earmuffs
This document specifies requirements for construction, design, performance, marking and user information for earmuffs.
In particular, it specifies requirements regarding the sound attenuation of the earmuffs, measured in accordance with EN ISO 4869-1:2018.
The document does not apply to earmuffs outside the size range of headsizes as defined in this standard.
This document does not apply to earmuffs for attachment to head protection and/or face protection devices.
Ergonomic aspects are addressed by taking into account, within the requirements, the interaction between the user, the device and where possible the working environment in which the device is likely to be used (see Annex ZA and EN 458).
Gehörschützer - Allgemeine Anforderungen - Teil 1: Kapselgehörschützer
Dieses Dokument legt Anforderungen hinsichtlich Konstruktion, Gestaltung, Leistung, Kennzeichnung und Benutzerinformation für Kapselgehörschützer fest.
Im Besonderen legt es Anforderungen bezüglich der Schalldämmung der Kapselgehörschützer fest, gemessen in Übereinstimmung mit EN ISO 4869 1:2018.
Dieses Dokument ist nicht anzuwenden für Kapselgehörschützer außerhalb des in diesem Dokument definierten Bereichs von Kopfgrößen.
Dieses Dokument ist nicht anzuwenden für Kapselgehörschützer zur Befestigung an Kopfschutz und/oder Gesichtsschutzeinrichtungen.
Ergonomische Aspekte werden innerhalb der Anforderungen durch die Einbeziehung der Wechselwirkung zwischen dem Gehörschutzbenutzer, dem Gehörschutz und, wo möglich, der Arbeitsumgebung, in dem der Gehörschutz wahrscheinlich benutzt wird, berücksichtigt (siehe Anhang ZA und EN 458).
Protecteurs individuels contre le bruit - Exigences générales - Partie 1 : Serre-tête
Le présent document spécifie les exigences en matière de construction, de conception, de performances et de marquage des serre-tête ainsi que les informations destinées à l'utilisateur.
Il spécifie en particulier les exigences relatives à la déclaration de l'affaiblissement acoustique des serre-tête, mesuré conformément à l'EN ISO 4869-1:2018.
Le présent document ne s'applique pas aux serre-tête dont la taille n'appartient pas à la gamme de tailles définie dans la présente norme.
Le présent document ne s'applique pas aux serre-tête destinés à être montés sur des dispositifs de protection de la tête et/ou du visage.
Dans les exigences spécifiées, les aspects ergonomiques sont abordés par la prise en compte de l'interaction entre l'utilisateur, l'équipement et, quand cela est possible, l'environnement de travail dans lequel l'équipement est susceptible d'être utilisé (voir l'Annexe ZA et l'EN 458).
Varovala sluha - Splošne zahteve - 1. del: Naušniki
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 352-1:2021
01-april-2021
Nadomešča:
SIST EN 352-1:2003
Varovala sluha - Splošne zahteve - 1. del: Naušniki
Hearing protectors - General requirements - Part 1: Earmuffs
Gehörschützer - Allgemeine Anforderungen - Teil 1: Kapselgehörschützer
Protecteurs individuels contre le bruit - Exigences générales - Partie 1: Serre-tête
Ta slovenski standard je istoveten z: EN 352-1:2020
ICS:
13.340.20 Varovalna oprema za glavo Head protective equipment
SIST EN 352-1:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 352-1:2021
---------------------- Page: 2 ----------------------
SIST EN 352-1:2021
EN 352-1
EUROPEAN STANDARD
NORME EUROPÉENNE
November 2020
EUROPÄISCHE NORM
ICS 13.340.20 Supersedes EN 352-1:2002
English Version
Hearing protectors - General requirements - Part 1:
Earmuffs
Protecteurs individuels contre le bruit - Exigences Gehörschützer - Allgemeine Anforderungen - Teil 1:
générales - Partie 1 : Serre-tête Kapselgehörschützer
This European Standard was approved by CEN on 24 February 2020.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 352-1:2020 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 352-1:2021
EN 352-1:2020 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 6
2 Normative references . 6
3 Terms, definitions, symbols and abbreviations . 6
3.1 Terms and definitions . 6
3.2 Symbols and abbreviations . 8
4 Requirements . 8
4.1 Sizing . 8
4.2 Materials and construction . 9
4.2.1 Materials . 9
4.2.2 Construction . 9
4.3 Performance . 9
4.3.1 General .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.