iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

prEN ISO 20500-2

(Main)

Mobile road construction machinery - Safety - Part 2: Specific requirements for road-milling machines

Mobile road construction machinery - Safety - Part 2: Specific requirements for road-milling machines

This part of EN 500 specifies the safety requirements for road-milling machines as defined in Clause 3 and deals with all significant hazards, hazardous situations and events relevant to these machines, when they are used as intended and under conditions of misuse which are reasonably foreseeable. This part of EN 500 contains additional requirements to EN 500-1 "Common requirements".

Bewegliche Straßenbaumaschinen - Sicherheit - Teil 2: Besondere Anforderungen an Straßenfräsen

Dieser Teil von ISO 20500 behandelt, zusammen mit Teil 1, alle signifikanten Gefährdungen für Straßenfräsen, wenn diese bestimmungsgemäß und unter den vernünftigerweise vom Hersteller vorhersehbaren Fehlbedienungsbedingungen während der gesamten Lebensdauer der Maschine verwendet werden (siehe Anhang D).
Die Anforderungen dieses Teils ergänzen die gemeinsamen Anforderungen, die in ISO 20500 1 formuliert sind.
Dieses Dokument wiederholt nicht die Anforderungen aus ISO 20500 1, sondern ergänzt oder ersetzt die Anforderungen zur Anwendung für Straßenfräsen.
Die folgenden signifikanten und relevanten Gefährdungen werden in diesem Dokument nicht behandelt:
- Blitzeinschlag.

Machines mobiles pour la construction de routes - Sécurité - Partie 2: Prescriptions spécifiques pour fraiseuses routières

Premični stroji za gradnjo cest - Varnost - 2. del: Posebne zahteve za stroje za rezkanje cestišča (ISO/DIS 20500-2:2020)

General Information

Status
Not Published
Publication Date
21-Feb-2024
ICS
93.080.10 - Road construction
Technical Committee
CEN/TC 151 - Construction equipment and building material machines - Safety
Drafting Committee
CEN/TC 151/WG 5 - Road construction machines - Safety
Current Stage
3098 - Decision to reject - Consensus building
Completion Date
26-Jun-2014
Directive
2006/42/EC - Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)
Mandate
M/396 - Mandate to CEN and Cenelec for standardisation in the field of machinery
Ref Project
oSIST prEN ISO 20500-2:2020 - Mobile road construction machinery - Safety - Part 2: Specific requirements for road-milling machines (ISO/DIS 20500-2:2020)

Relations

Revises
EN 500-2:2006+A1:2008 - Mobile road construction machinery - Safety - Part 2: Specific requirements for road-milling machines
Effective Date
18-Jan-2023

Buy Standard

prEN ISO 20500-2:2020prEN ISO 20500-2:2020
PreviousNext
Draft
prEN ISO 20500-2:2020
English language
60 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN ISO 20500-2:2020
01-september-2020
Premični stroji za gradnjo cest - Varnost - 2. del: Posebne zahteve za stroje za
rezkanje cestišča (ISO/DIS 20500-2:2020)
Mobile road construction machinery - Safety - Part 2: Specific requirements for road-
milling machines (ISO/DIS 20500-2:2020)
Bewegliche Straßenbaumaschinen - Sicherheit - Teil 2: Besondere Anforderungen an
Straßenfräsen (ISO/DIS 20500-2:2020)
Machines mobiles pour la construction de routes - Sécurité - Partie 2: Prescriptions
spécifiques pour fraiseuses routières (ISO/DIS 20500-2:2020)
Ta slovenski standard je istoveten z: prEN ISO 20500-2
ICS:
93.080.10 Gradnja cest Road construction
oSIST prEN ISO 20500-2:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 20500-2:2020

---------------------- Page: 2 ----------------------
oSIST prEN ISO 20500-2:2020
DRAFT INTERNATIONAL STANDARD
ISO/DIS 20500-2
ISO/TC 195 Secretariat: SAC
Voting begins on: Voting terminates on:
2020-07-10 2020-10-02
Mobile road construction machinery — Safety —
Part 2:
Specific requirements for road-milling machines
Machines mobiles pour la construction de routes — Sécurité —
Partie 2: Prescriptions spécifiques pour fraiseuses routières
ICS: 93.080.10
THIS DOCUMENT IS A DRAFT CIRCULATED
This document is circulated as received from the committee secretariat.
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
ISO/CEN PARALLEL PROCESSING
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 20500-2:2020(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
©
PROVIDE SUPPORTING DOCUMENTATION. ISO 2020

---------------------- Page: 3 ----------------------
oSIST prEN ISO 20500-2:2020
ISO/DIS 20500-2:2020(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2020
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2020 – All rights reserved

---------------------- Page: 4 ----------------------
oSIST prEN ISO 20500-2:2020
ISO/DIS 20500-2:2020(E)
Contents Page
Foreword . v
Introduction . vii
1 Scope .1
2 Normative references .1
3 Terms and definitions .2
4 Safety requirements and/or protective/risk reduction measures .2
4.1 General .2
4.2 Visibility .2
4.2.1 General .2
4.2.2 Visibility performance criteria .3
4.2.3 Visibility performance criteria for the RB .4
4.3 Operation and handling .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 13862:2021(Main)
Floor cutting-off machines - Safety
SIST EN 13862:2022

This document applies to pedestrian-controlled floor-sawing machines having travel power feed or manual feed (see 3.1) for sawing, grooving and milling floor surfaces made of concrete, asphalt and similar mineral building materials where the main power is supplied by electric or internal combustion prime engine. The power transmission of floor-sawing machines is mechanical or hydraulic.
This document deals with all significant hazards, hazardous situations or hazardous events relevant to floor sawing machines, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Annex A). This document specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards during the lifetime of the machinery as described in EN ISO 12100:2010, 5.4.
These machines are designed for use with rotating cutting-off wheels for wet and dry cutting. These cutting-off wheels can be either a diamond cutting-off wheel or a boron nitride cutting-off wheel.
This document does not apply to:
-   self-propelled ride-on floor-sawing machines;
-   machines moving along a rail;
-   hand-held portable cutting off machines for construction materials mounted on a mobile support, to be used as floor saws;
-   remote-controlled machines.
In this document, floor-sawing machines are called “machines”, and cutting-off wheels are also called “tools”.
This document applies to machines which are manufactured after the date of approval of the standard by CEN.

  • Standard
    50 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    41 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13020:2015(Main)
Road surface treatment machines - Safety requirements
SIST EN 13020:2016

This European Standard applies to road surface treatment machines, which are in particular:
-   binder sprayers [or sprayers];
-   chipping spreaders [or spreaders];
-   machines for surface repairs (binder sprayer chipping spreader [or sprayer spreader]);
-   mastics asphalt mixers;
-   joint sealer;
-   micro-surfacing machines/slurry machines;
-   cold asphalt laying / micro-asphalt-paving machines
(see also Clause 3).
Road surface treatment machines can be mounted on a carrier vehicle, trailer or articulated truck, combining to form an integral unit. It is also possible to mount a road surface treatment machine on its own chassis construction and propulsion system (self-propelled or pedestrian-controlled). In all cases the machine and chassis form an integral unit.
Directives and standards for the vehicular truck chassis aspects, termed 'carrier vehicle' in this document, would be those relative to that equipment, even where specific modifications have been made to realize the road surface treatment application. The use in public road traffic is governed by the national regulations.
This European Standard deals with all significant hazards identified through a risk assessment relevant to road surface treatment machines when they are used as intended and under the conditions foreseen by the manufacturer (see Clause 4). This European Standard does not deal with significant hazards associated with pressurized tanks, and EMC. This European Standard specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards associated with machine operation, setting and adjustments, load discharge and routine maintenance.
This European Standard does not include requirements for the carrier vehicles or special constructions. These are covered in directives related to the construction of vehicles. Demountable bodywork systems (e.g. demountable containers) are specified in other standards. Vibrations are not dealt with in the standard, because for all machines of this family vibration is not a relevant hazard due to the low working speed and special working conditions (e.g. flat surface).
This European Standard does not deal with the risks associated with the operation of the machines in potentially explosive atmospheres.
This European Standard does not include requirements of the 94/55/EC Directive related to transport of dangerous goods by road but contains additional specifications in link with these existing requirements.
This European Standard applies to machines which are manufactured after the date of approval of this standard by CEN.

  • Standard
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 536:2015(Main)
Road construction machines - Mixing plants for road construction materials - Safety requirements
SIST EN 536:2015

This European Standard specifies the safety requirements applicable to stationary and relocatable mixing plants for the production of materials (e.g. hot-mix asphalt, cold-mix asphalt, cement gravel) used for the construction and maintenance of traffic routes (roads, highways, sidewalks, airfields, etc.) water retaining works, dam walls, culverts, etc.
This European Standard applies to the following types of mixing plant:
a)   hot Asphalt mixing plant;
b)   cold mixing plant (e.g. for production of cement gravel, cold mix asphalt);
c)   mixing plant for bituminous or non-bituminous reclaimed materials;
d)   mixing plant for mastic asphalt, also including natural asphalt.
Machines moving during the working process (e.g. mobile mastic asphalt mixers) and crushers are not covered by this European Standard.
Those types of asphalt mixing plants can also be combined or enlarged by additional installations (e.g. Plant for storage of binders (e.g. bituminous, synthetic, vegetal).
This European Standard deals with all significant hazards pertinent to mixing plants, when they are used as intended and under the conditions of misuse which are reasonably foreseen by the manufacturer (see Clause 4). This European Standard specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards.
This European Standard does not apply to machines for the production of cement concrete and mortar as covered in EN 12151.
This European Standard does not deal with hazards caused by flammable gases. As soon as information is available it will be included.
This European Standard is not applicable to mixing plants for road construction materials, which are manufactured before the date of publication of this European Standard by CEN.

  • Standard
    60 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 500-1:2006+A1:2009(Main)
Mobile road construction machinery - Safety - Part 1: Common requirements
SIST EN 500-1:2007+A1:2010

1.1   This part of EN 500 specifies the common safety requirements for mobile road construction machinery ). The EN 500 series is applicable to mobile road construction machinery as listed in Annex A. When no specific standard exists, EN 500-1 applies.
It specifies common requirements for the design and construction of mobile road construction machinery in order to protect workers from accidents and health hazards which could occur during operation, loading, transport and maintenance.
Additional specific requirements for certain types of mobile road construction machinery are given in parts 2 to 4 and 6 of this standard.
This part of this standard gives safety requirements for all types of mobile road construction machinery and shall be used in conjunction with one of the parts 2 to 4 and 6. These machine-specific parts do not repeat the requirements from part 1 but add to or replace the requirements for the type of mobile road construction machinery in question.
Machine-specific requirements in parts 2 to 4 and 6 take precedence over the respective requirements of this stan-dard.
For types of mobile road construction machinery not dealt with in parts 2 to 4 and 6, EN 500-1 applies and if for those machinery additional derived risks may arise, these risks have to be taken into consideration.
1.2   This European Standard deals with all significant hazards, hazardous situations and events relevant to mobile road construction machinery, when they are used as intended and under conditions of misuse which are reasonably foreseeable (see Clause 4).
This European Standard specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards as specified in Clause 4.
1.3   This European Standard applies to machines which are manufactured after the date of publication of this European Standard by CEN.

  • Standard
    51 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 500-3:2006+A1:2008(Main)
Mobile road construction machinery - Safety - Part 3: Specific requirements for soil-stabilising machines and recycling machines
SIST EN 500-3:2007+A1:2008

This part of EN 500 specifies the safety requirements for soil-stabilising machines and recycling machines as de-fined in Clause 3 and deals with all significant hazards, hazardous situations and events relevant to these ma-chines, when they are used as intended and under conditions of misuse which are reasonably foreseeable.
This part of EN 500 contains additional requirements to EN 500-1 "Common requirements".

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 500-2:2006+A1:2008(Main)
Mobile road construction machinery - Safety - Part 2: Specific requirements for road-milling machines
SIST EN 500-2:2007+A1:2008

This part of EN 500 specifies the safety requirements for road-milling machines as defined in Clause 3 and deals with all significant hazards, hazardous situations and events relevant to these machines, when they are used as intended and under conditions of misuse which are reasonably foreseeable.
This part of EN 500 contains additional requirements to EN 500-1 "Common requirements".

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 500-6:2006+A1:2008(Main)
Mobile road construction machinery - Safety - Part 6: Specific requirements for paver-finishers
SIST EN 500-6:2007+A1:2008

This part of EN 500 specifies the safety requirements for paver-finishers as defined in Clause 3 and deals with the significant hazards relevant to these machines, when they are used as intended and under conditions of misuse which are reasonably foreseeable. This part of EN 500 contains additional requirements to EN 500-1 "Common requirements".
If internal and/or external vibrators are used for concrete paving, then prEN 12649 applies.

  • Standard
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
prEN ISO 20500-5(Main)
Mobile road construction machinery - Safety - Part 5: Mobile Specific requirements for paver-finishers (ISO/DIS 20500-5:2020)
oSIST prEN ISO 20500-5:2020

This part of ISO 20500, together with part 1, deals with all significant hazards for paver-finisher when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer associated with the whole life time of the machine (see Clause 4).
The requirements of this part are complementary to the common requirements formulated in ISO 20500-1.
This document does not repeat the requirements from ISO 20500-1, but adds or replaces the requirements for application for paver-finisher.

  • Draft
    64 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
prEN ISO 20500-7(Main)
Mobile road construction machinery - Safety - Part 7: Specific requirements for slipform paver and texture curing machines (ISO/DIS 20500-7:2020)
oSIST prEN ISO 20500-7:2020

This part of ISO 20500, together with part 1, deals with all significant hazards for slipform paver and texture curing machines when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer associated with the whole life time of the machine (see Clause 4).
The requirements of this part are complementary to the common requirements formulated in ISO 20500-1.
This document does not repeat the requirements from ISO 20500-1, but adds or replaces the requirements for application for slipform paver and texture curing machines.

  • Draft
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
prEN ISO 20500-4(Main)
Mobile road construction machinery - Safety - Part 4: Specific requirements for compaction machines
oSIST prEN ISO 20500-4:2020

This part of EN 500 specifies the safety requirements for compaction machines as defined in Clause 3 and deals with all significant hazards, hazardous situations and events relevant to compaction machines, when they are used as intended and under conditions of misuse which are reasonably foreseeable. This document specifies additional requirements to and/or exceptions from EN 500-1 "Common requirements".

  • Draft
    52 pages
    English language
    sale 10% off
    e-Library read for
    1 day