EN 3385:2012

Aerospace series - Rings retaining, external, axial mounting, steel, vacuum cadmium plated

This European Standard defines the characteristics of axial mounting external retaining rings, in steel, vacuum cadmium plated, for aerospace applications.

Luft- und Raumfahrt - Sicherungsringe, axial auf Wellen montierbar, aus Stahl, vakuumverkadmet

Diese Norm legt die Merkmale von axial auf Wellen montierbaren Sicherungsringen aus Stahl, im Vakuum
verkadmet, zur Anwendung in der Luft- und Raumfahrt fest.

Série aérospatiale - Anneaux d’arrêt, à montage axial, type extérieur, en acier, cadmiés sous vide

La présente Norme Européenne définit les caractéristiques des anneaux d’arrêt, à montage axial, type extérieur, en acier, cadmiés sous vide, pour applications aérospatiales.

Aeronavtika - Varnostni obroči za zunanjo osno pritrditev, jekleni, vakuumsko kadmirani

Ta standard določa lastnosti jeklenih vakuumsko kadmiranih varnostnih obročev za zunanjo osno pritrditev v okrogle odprtine za uporabo v aeronavtiki.

General Information

• Status: Published
• Publication Date: 06-Mar-2012
• Withdrawal Date: 06-Sep-2012
• ICS: 49.030.50 - Washers and other locking elements
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 3 - Mechanical
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Completion Date: 30-Jun-2017
• Ref Project: SIST EN 3385:2012 - Aerospace series - Rings retaining, external, axial mounting, steel, vacuum cadmium plated

Standards Content (Sample)

SLOVENSKI STANDARD
01-maj-2012
$HURQDYWLND9DUQRVWQLREURþL]D]XQDQMRRVQRSULWUGLWHYMHNOHQLYDNXXPVNR
NDGPLUDQL
Aerospace series - Rings retaining, external, axial mounting, steel, vacuum cadmium
plated
Luft- und Raumfahrt - Sicherungsringe, axial auf Wellen montierbar, aus Stahl,
vakuumverkadmet
Série aérospatiale - Anneaux d’arrêt, à montage axial, type extérieur, en acier, cadmiés
sous vide
Ta slovenski standard je istoveten z: EN 3385:2012
ICS:
49.030.50 Podložke in drugi blokirni Washers and other locking
elementi elements
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 3385
NORME EUROPÉENNE
EUROPÄISCHE NORM
March 2012
ICS 49.030.50
English Version
Aerospace series - Rings retaining, external, axial mounting,
steel, vacuum cadmium plated
Série aérospatiale - Anneaux d'arrêt, à montage axial, type Luft- und Raumfahrt - Sicherungsringe, axial auf Wellen
extérieur, en acier, cadmiés sous vide montierbar, aus Stahl, vakuumverkadmet
This European Standard was approved by CEN on 24 September 2011.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2012 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 3385:2012: E
worldwide for CEN national Members.

Contents Page
Foreword . 3
1 Scope and field of application . 4
2 Normative references . 4
3 Required characteristics . 4
3.1 Configuration — Dimensions — Masses . 4
3.2 Materials . 4
3.3 Surface treatment . 4
4 Designation . 8
5 Marking. 8
6 Technical specification . 8
7 Mounting . 8

Foreword
This document (EN 3385:2012) has been prepared by the Aerospace and Defence Industries Association of
Europe - Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received
the approval of the National Associations and the Official Services of the member countries of ASD, prior to its
presentation to CEN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by September 2012, and conflicting national standards shall be withdrawn
at the latest by September 2012.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland, Turkey and the United Kingdom.
1 Scope and field of application
This standard defines the characteristics of axial mounting external retaining rings, in steel, vacuum cadmium
plated, for aerospace applications.
2 Normative references
The following documents
...