Hardware performance sheet (HPS) - Identification and summary of test evidence to facilitate the inter-changeability of building hardware for application to fire resisting and/or smoke control doorsets and/or openable windows

This document summarizes relevant results and classifications from tests of the fire and smoke resistance performance of building hardware in the format of a hardware performance sheet (HPS). This document provides guidance and requirements on the minimum data required as a basis for the preparation of EXAP reports for the interchangeability of building hardware on fire-retardant and/or smoke-tight doors and openable windows.
This document identifies the performance characteristics and the requirements for building hardware which can be found in the appropriate product standards.

Leistungsbeschreibung für Baubeschläge - Identifizierung und Zusammenfassung der Prüfnachweise zur Unterstützung der Austauschbarkeit von Baubeschlägen für die Anwendung an feuerwiderstandsfähigen und/oder rauchdichten Toren, Türen und/oder zu öffnenden Fenstern

Dieses Dokument fasst relevante Ergebnisse und Klassifizierungen aus Prüfungen der Feuerwiderstandsfähigkeit, der Rauchschutzeigenschaften und entsprechender Merkmale der Dauerhaftigkeit von Baubeschlägen im Format eines Leistungsdatenblattes (HPS) zusammen. Dieses Dokument enthält Leitlinien und datentechnische Mindestanforderungen als Grundlage für die Erstellung von EXAP-Berichten zum Zwecke der Austauschbarkeit von Baubeschlägen von flammhemmenden und/oder rauchdichten Toren, Türen und zu öffnenden Fenstern.
Dieses Dokument legt die Leistungsmerkmale für und die Anforderungen an Baubeschläge fest, die in den entsprechenden Produktnormen zu finden sind.

Fiche de performance de la quincaillerie (HPS) - Identification et récapitulatif des essais justificatifs visant à faciliter l'interchangeabilité de la quincaillerie de bâtiment destinée à être installée sur des blocs-portes et fenêtres ouvrantes résistant au feu et pare-fumées

Le présent document résume les résultats et les classifications pertinents à partir d’essais portant sur les performances de résistance au feu et à la fumée de la quincaillerie de bâtiment, sous la forme d’une HPS. Le présent document fournit des conseils et des prescriptions portant sur les données minimales requises comme base pour la préparation des rapports EXAP sur l’interchangeabilité de la quincaillerie de bâtiment des portes et fenêtres ouvrantes ignifugées et/ou étanches à la fumée.
Le présent document identifie les caractéristiques de performances et les prescriptions pour la quincaillerie de bâtiment qui peuvent figurer dans les normes de produits appropriées.

Stavbno okovje - Specifikacije - Identifikacija in povzetek revizijskih dokazov v podporo zamenljivosti gradbenega okovja za uporabo pri požarno odpornih in/ali za dim neprepustnih vratih in/ali oknih, ki se odpirajo

V tem dokumentu so povzeti relevantni rezultati ter razvrstitve iz preskusov odpornosti gradbenega okovja proti ognju in dimu v obliki preglednice učinkovitosti okovja (HPS). Ta dokument podaja navodila in zahteve v zvezi z najmanjšo količino podatkov, ki je potrebna kot osnova za pripravo poročil EXAP o zamenljivosti gradbenega okovja pri požarno odpornih in/ali za dim neprepustnih vratih in oknih, ki se odpirajo.
Ta dokument opredeljuje lastnosti delovanja in zahteve za gradbeno okovje, ki jih je mogoče najti v ustreznih standardih za izdelke.

General Information

Status
Published
Publication Date
28-Nov-2023
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
29-Nov-2023
Due Date
15-Nov-2023
Completion Date
29-Nov-2023

Relations

Buy Standard

Standard
EN 16035:2024
English language
14 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-januar-2024
Nadomešča:
SIST EN 16035:2013
Stavbno okovje - Specifikacije - Identifikacija in povzetek revizijskih dokazov v
podporo zamenljivosti gradbenega okovja za uporabo pri požarno odpornih in/ali
za dim neprepustnih vratih in/ali oknih, ki se odpirajo
Hardware performance sheet (HPS) - Identification and summary of test evidence to
facilitate the inter-changeability of building hardware for application to fire resisting
and/or smoke control doorsets and/or openable windows
Leistungsbeschreibung für Baubeschläge - Identifizierung und Zusammenfassung der
Prüfnachweise zur Unterstützung der Austauschbarkeit von Baubeschlägen für die
Anwendung an feuerwiderstandsfähigen und/oder rauchdichten Toren, Türen und/oder
zu öffnenden Fenstern
Quincaillerie de bâtiment - Fiche de performance de la quincaillerie (HPS) - Identification
et récapitulatif des essais justificatifs visant à faciliter l'interchangeabilité de la
quincaillerie de bâtiment destinée à être installée sur des blocs-portes et fenêtres
ouvrantes résistant au feu et pare-fumées
Ta slovenski standard je istoveten z: EN 16035:2023
ICS:
13.220.50 Požarna odpornost Fire-resistance of building
gradbenih materialov in materials and elements
elementov
91.190 Stavbna oprema Building accessories
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN 16035
EUROPEAN STANDARD
NORME EUROPÉENNE
November 2023
EUROPÄISCHE NORM
ICS 91.190 Supersedes EN 16035:2012
English Version
Hardware performance sheet (HPS) - Identification and
summary of test evidence to facilitate the inter-
changeability of building hardware for application to fire
resisting and/or smoke control doorsets and/or openable
windows
Quincaillerie de bâtiment - Fiche de performance de la Leistungsbeschreibung für Baubeschläge -
quincaillerie (HPS) - Identification et récapitulatif des Identifizierung und Zusammenfassung der
essais justificatifs visant à faciliter l'interchangeabilité Prüfnachweise zur Unterstützung der
de la quincaillerie de bâtiment destinée à être installée Austauschbarkeit von Baubeschlägen für die
sur des blocs-portes et fenêtres ouvrantes résistant au Anwendung an feuerwiderstandsfähigen und/oder
feu et pare-fumées rauchdichten Toren, Türen und/oder zu öffnenden
Fenstern
This European Standard was approved by CEN on 22 October 2023.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 16035:2023 E
worldwide for CEN national Members.

Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 6
4 General principles of the Hardware Performance Sheet (HPS) . 6
5 Data to be provided . 7
5.1 General . 7
5.2 Required data — Building hardware . 7
Table 1 — Building hardware . 7
5.3 Required data — test evidence used . 8
Table 2 — Test evidence used . 8
5.4 Performance level(s) related to the evidence fire resistance .10
Table 3 — Performance level(s) fire resistance .10
5.5 Performance level(s) related to the evidence smoke control .11
Table 4 — Performance level(s) smoke control .11
5.6 Performance level(s) related to the durability of self-closing .12
Table 5 — Performance level(s) for durability of self-closing .12
Annex A (informative) Structure and scheme of an HPS .13
Figure A.1 — HPS Structure .13
Bibliography .14

European foreword
This document (EN 16035:2023) has been prepared by Technical Committee CEN/TC 33 “Doors,
windows, shutters, building hardware and curtain walling”, the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by May 2024, and conflicting national standards shall be
withdrawn at the latest by May 2024.
This document supersedes EN 16035:2012.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
In comparison with the previous edition, the following significant technical modifications have been
made:
Modified clauses, paragraphs, annexes, tables or figures:
— The structure has been redesigned;
— Additional requirements added for information on thermal separation, insulation, intumescent layer,
related EXAP standards and rules;
New normative reference:
— The EN 17020 series for durability of self-closing EXAP standards are now available;
Deleted normative references:
— EN 1154: this standard is no longer referred to;
— EN 14600: this standard has been withdrawn.
Any feedback and questions on this document should be directed to the users’ national standards body.
A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organisations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland,
Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of North
Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the United
Kingdom.
Introduction
The Hardware Performance Sheet (HPS) is intended to facilitate the interaction between the available
data from completed tests and the data required for the interchangeability.
For this purpose, this document defines the required data, which can be provided in a standardized data
format for the interchangeability according to the respective Extended Application rule (EXAP) from the
EN 15269 series or EN 17020 series of standards.
This document is primarily addressed to the creators of an HPS.
An HPS might be used, but not only by the creators of an EXAP Report.
This document is designed to enable an HPS to replace a short test report for building hardware in the
future.
1 Scope
This document summarizes relevant results and classifications from tests of the fire resistance, smoke
control and related durability performances of building hardware in the format of a hardware
performance sheet (HPS). This document provides guidance and requirements on the minimum data
required as a basis for the preparation of EXAP reports for the interchangeability of building hardware
on fire-retardant and/or smoke-tight doors and openable windows.
This document identifies the performance characteristics and the requirements for building hardware
which can be found in the appropriate product standards.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
EN 1191, Windows and doors - Resistance to repeated opening and closing - Test method
EN 1363-1, Fire resistance tests - Part 1: General requirements
EN 1634-1:2014+A1:2018, Fire resistance and smoke control tests for door and shutter assemblies,
openable windows and elements of building hardware - Part 1: Fire resistance test for door and shutter
assemblies and openable windows
EN 1634-2, Fire resistance and smoke control tests for door, shutter and openable window assemblies and
elements of building hardware - Part 2: Fire resistance characterisation test for elements of building
hardware
EN 1634-3, Fire resistance and smoke control tests for door and shutter assemblies, openable windows and
elements of building hardware - Part 3: Smoke control test for door and shutter assemblies
EN 12604, Industrial, commercial and garage doors and gates - Mechanical aspects - Requirements and test
methods
EN 13501-2, Fire classification of construction products and building elements - Part 2: Classification using
data from fire resistance and/or smoke control tests, excluding ventilation services
EN 15269 (all parts), Extended application of test results for fire resistance and/or smoke control for door,
shutter and openable window assemblies including their elements of building hardware
EN 16034, Pedestrian doorsets, industrial, commercial, garage doors and openable windows - Product
standard, performance characteristics - Fire resisting and/or smoke control characteristics
EN 17020 (all parts), Extended application of test results on durability of self-closing for fire resistance
and/or smoke control doorsets and openable windows
3 Terms and definitions
For the purposes of this document, the terms and definitions given in EN 1191, EN 1363-1, EN 1634-1,
EN 1634-3, EN 15725, EN 12519, EN 12433-1, EN 12433-2, EN ISO 13943 and the following apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
• IEC Electropedia: available at http://www.electropedia.org/
• ISO Online browsing platform: available at http://www.iso.org/obp
3.1
doorset
pedestrian doorset, industrial, commercial and/or garage doorset, rolling shutter and/or operable fabric
curtain including any frame or guide, door leaf or leaves, rolling or folding curtain, etc.,
Note 1 to entry: Including any side panel(s), vision panel(s), flush over panel(s), transom panel(s) and/or glazing
together with any building hardware and any seals (whether provided for the purpose of fire resistance or smoke
control or for other purposes such as draught or acoustics).
Note 2 to entry: Fulfilling the provisions of this document is under the responsibility of one identified
manufacturer.
3.2
element
generic term for doorsets and openable windows
3.3
interchangeability
possibility, under the responsibility of the competent subject, to use elements of building hardware which
differ from those tested in the original doorset or openable window without compromising its
performance characteristics
3.4
openable window
window with one or more moveable elements including any fixed or removable side or overpanel(s),
perimeter frame and relevant elements of building hardware
3.5
product line
range of products made of the same material and the same function, where one or more specific members
are representative for the whole family
4 General principles of the Hardware Performance Sheet (HPS)
An HPS provides fundamental information to enable a notified body to evaluate the interchangeability of
building hardware in context of the application of the EXAP standards EN 15269 (all parts) and
EN 17020 (all parts).
An HPS lists all applicable test evidence used and performance levels for an item of building hardware by
one or mor
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.