EN 15685:2024
(Main)Building hardware - Requirements and test methods - Multipoint locks, latches and locking plates - Characteristics and test methods
Building hardware - Requirements and test methods - Multipoint locks, latches and locking plates - Characteristics and test methods
This document specifies product characteristics and test methods of mechanically operated multipoint locks and their locking plates.
This document covers multipoint locks their locking plates which are either manufactured and placed on the market in their entirety by one producer or assembled from sub-assemblies produced by more than one producer and designed to be used in combination.
This document does not cover assessment of the contribution of the product to the fire resistance of specific fire resistance and/or smoke control door set assemblies.
This document is not applicable to mechanically/electromechanically cylinders, handles, locks for windows, padlocks, locks for safes, furniture locks or prison locks.
This document does not specify mechanically operated locks or their locking plates which are specified by EN 12209.
Schlösser und Baubeschläge - Mehrfachverriegelungs-Schlösser und Schließbleche - Anforderungen und Prüfverfahren
Dieses Dokument legt Produktmerkmale und Prüfverfahren für mechanisch betätigte Mehrfachverriegelungen und deren Schließbleche fest.
Dieses Dokument deckt Mehrfachverriegelungen und deren Schließbleche ab, die entweder in ihrer Gesamtheit durch einen Hersteller gefertigt und in den Handel gebracht werden oder durch mehr als einen Hersteller aus Baugruppen montiert werden und dazu ausgelegt sind, als Kombination verwendet zu werden.
Dieses Dokument umfasst nicht die Bewertung des Produktbeitrags zum Feuerwiderstand von bestimmten Feuerschutz- und/oder Rauchschutztürelementen.
Dieses Dokument gilt nicht für mechanische/elektromechanische Schließzylinder, Türdrücker, Fensterriegel, Vorhängeschlösser, Tresorschlösser, Möbelschlösser oder Gefängnisschlösser.
Dieses Dokument trifft keine Festlegungen für mechanisch betätigte Schlösser und deren Schließbleche, die durch FprEN 12209 behandelt werden.
Quincaillerie pour le bâtiment - Serrures multipoints et leurs gâches - Prescriptions et méthodes d'essais
Le présent document spécifie les caractéristiques et les méthodes d'essai relatives aux serrures mécaniques multipoints et à leurs gâches.
Le présent document s'applique aux serrures multipoints et à leurs gâches qui sont soit fabriquées et mises sur le marché dans leur intégralité par un seul fabricant, soit assemblées à partir de sous-ensembles produits par plus d'un fabricant et conçus pour être combinés.
Le présent document ne couvre pas l'évaluation de la contribution du produit à la résistance au feu de blocs-portes coupe-feu et pare-fumée spécifiques.
Le présent document ne s'applique pas aux cylindres mécaniques/électromécaniques, béquilles, serrures pour fenêtres, cadenas, serrures pour coffres-forts, serrures de meubles ou serrures de prison.
Le présent document ne spécifie pas les serrures mécaniques ou leurs gâches, objets du EN 12209.
Stavbno okovje - Zahteve in preskusne metode - Večtočkovne ključavnice, zapahi in varovalne podložke - Značilnosti in preskusne metode
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN 15685:2019
01-november-2019
Stavbno okovje - Zahteve in preskusne metode - Večtočkovne ključavnice, zapahi
in varovalne podložke - Značilnosti in preskusne metode
Building hardware - Requirements and test methods - Multipoint locks, latches and
locking plates - Characteristics and test methods
Schlösser und Baubeschläge - Mehrfachverriegelungs-Schlösser und Schließbleche -
Anforderungen und Prüfverfahren
Quincaillerie pour le batiment - Serrures multipoints et leurs gaches - Prescriptions et
méthodes d'essais
Ta slovenski standard je istoveten z: prEN 15685
ICS:
91.190 Stavbna oprema Building accessories
oSIST prEN 15685:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
oSIST prEN 15685:2019
oSIST prEN 15685:2019
DRAFT
EUROPEAN STANDARD
prEN 15685
NORME EUROPÉENNE
EUROPÄISCHE NORM
September 2019
ICS 91.190
English Version
Building hardware - Requirements and test methods -
Multipoint locks, latches and locking plates -
Characteristics and test methods
Quincaillerie pour le batiment - Serrures multipoints Schlösser und Baubeschläge - Mehrfachverriegelungs-
et leurs gaches - Prescriptions et méthodes d'essais Schlösser und Schließbleche - Anforderungen und
Prüfverfahren
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 33.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 15685:2019 E
worldwide for CEN national Members.
oSIST prEN 15685:2019
prEN 15685:2019 (E)
Contents Page
European foreword . 4
1 Scope . 5
2 Normative references . 5
3 Terms, definitions, symbols and abbreviations . 6
3.1 Terms and definitions . 6
3.2 Symbols and abbreviations . 9
4 Product characteristics . 10
4.1 General. 10
4.2 Category of use (first digit) . 11
4.3 Durability characteristics (second digit) . 18
4.4 Door mass and closing force (third digit) . 20
4.5 Suitability for use on fire resistance and/or smoke control door set (forth digit) . 20
4.6 Safety (fifth digit) . 21
4.7 Corrosion resistance and temperature (sixth digit) . 21
4.8 Security of locking point (seventh digit) . 21
4.9 Key identification of lever locks (eight digit) . 32
4.10 Security of anti-separation point (nine digit) . 33
4.11 Clenching (tenth digit) . 41
5 Testing, assessment and sampling methods . 42
5.1 General. 42
5.2 Test apparatus . 43
5.3 Test procedure – Drilling procedure . 44
5.4 Test methods – general . 44
5.5 Test methods - Category of use . 45
5.6 Test methods - Durability . 48
5.7 Test methods - Door mass and closing force . 54
5.8 Suitability for use on fire resistance and smoke control doors . 55
5.9 Safety . 55
5.10 Corrosion resistance and temperature . 56
5.11 Security of locking point . 56
5.12 Key identification of lever locks . 66
5.13 Security of anti-separation point . 66
5.14 Test methods - Clenching . 71
6 Assessment and verification of constancy of performance – AVCP . 72
6.1 General. 72
6.2 Type testing . 72
6.3 Factory production Control (FPC) . 75
7 Classification. 79
7.1 Coding system . 79
7.2 Classification. 80
7.3 Example of classification for multipoint locks and their locking plates . 83
8 Marking . 84
8.1 On the product . 84
oSIST prEN 15685:2019
prEN 15685:2019 (E)
8.2 On the packaging. 84
Annex A (normative) Test sampling and sequencing . 85
Annex B (informative) Product information . 89
Annex ZA (informative) Relationship of this European Standard with Regulation (EU)
No.305/2011 . 92
Bibliography . 95
oSIST prEN 15685:2019
prEN 15685:2019 (E)
European foreword
This document (prEN 15685:2019) has been prepared by Technical Committee CEN/TC 33 “Doors,
windows, shutters, building hardware and curtain walling”, the secretariat of which is held by AFNOR.
This document is currently submitted to the CEN Enquiry.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential characteristics of EU Regulation(s).
For relationship with Regulation (EU) No. 305/2011 (CPR), see informative Annex ZA, which is an
integral part of this document.
This European standard is one of a series of European Standards dedicated to building hardware
products.
European standards for mechanically operated locks and latches (EN 12209) and for electromechanically
operated locks and locking plates (EN 14846) are also available.
The performance tests incorporated in this standard are considered to be reproducible and as such will
provide a consistent and objective assessment of the performance of these products for all CEN Members.
oSIST prEN 15685:2019
prEN 15685:2019 (E)
1 Scope
This document specifies product characteristics and test methods of mechanically operated multipoint
locks and their locking plates:
a) for use in doors in buildings;
b) for use on fire and smoke compartmentation doors fitted with door closing devices, to enable such
doors to close reliably and thus achieve self-closing in the event of fire;
c) for use on locked fire doors to maintain the fire integrity of the door assembly.
This document covers multipoint locks their locking plates which are either manufactured and placed on
the market in their entirety by one producer or assembled from sub-assemblies produced by more than
one producer and designed to be used in combination.
This document does not cover assessment of the contribution of the product to the fire resistance of
specific fire resistance and/or smoke control door set assemblies.
This document is not applicable to mechanical/electromechanical cylinders, handles, locks for windows,
padlocks, locks for safes, furniture locks or prison locks.
This document does not specify mechanically operated locks or their locking plates which are specified
by EN 12209.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
EN 1303, Building hardware - Cylinders for locks - Requirements and test methods
EN 1634-1, Fire resistance and smoke control tests for door, shutter and open able window assemblies and
elements of building hardware - Part 1: Fire resistance tests for doors, shutters and open able windows
EN 1634-2, Fire resistance and smoke control tests for door, shutter and open able window assemblies and
elements of building hardware - Part 2: Fire resistance characterisation test for elements of building
hardware
EN 1634-3, Fire resistance and smoke control tests for door and shutter assemblies, open able windows and
elements of building hardware - Part 3: Smoke control test for door and shutter assemblies
EN 1670:2007, Building hardware - Corrosion resistance - Requirements and test methods
EN 1906, Building hardware - Lever handles and knob furniture - Requirements and test methods
EN 16035, Hardware performance sheet (HPS) - Identification and summary of test evidence to facilitate
the inter-changeability of building hardware for application to fire resisting and/or smoke control door sets
and/or openable windows
oSIST prEN 15685:2019
prEN 15685:2019 (E)
3 Terms, definitions, symbols and abbreviations
3.1 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
• IEC Electropedia: available at http://www.electropedia.org/
• ISO Online browsing platform: available at https://www.iso.org/obp
3.1.1
anti-separation point
locking point designed to prevent the separation of a door leaf from its frame or adjacent door leaf in the
p
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.