prEN 16035
(Main)Hardware performance sheet (HPS) - Identification and summary of test evidence to facilitate the inter-changeability of building hardware for application to fire resisting and/or smoke control doorsets and/or openable windows
Hardware performance sheet (HPS) - Identification and summary of test evidence to facilitate the inter-changeability of building hardware for application to fire resisting and/or smoke control doorsets and/or openable windows
This document summarizes relevant results and classifications from tests of the fire and smoke resistance performance of building hardware in the format of a hardware performance sheet (HPS). This document provides guidance and requirements on the minimum data required as a basis for the preparation of EXAP reports for the interchangeability of building hardware on fire-retardant and/or smoke-tight doors and openable windows.
This document identifies the performance characteristics and the requirements for building hardware which can be found in the appropriate product standards.
Leistungsbeschreibung für Baubeschläge - Identifizierung und Zusammenfassung der Prüfnachweise zur Unterstützung der Austauschbarkeit von Baubeschlägen für die Anwendung an feuerwiderstandsfähigen und/oder rauchdichten Toren, Türen und/oder zu öffnenden Fenstern
Dieses Dokument fasst relevante Ergebnisse und Klassifizierungen aus Prüfungen der Feuer- und Rauchschutzeigenschaften von Baubeschlägen im Format einer Leistungsbeschreibung (HPS) zusammen. Dieses Dokument enthält Leitlinien und datentechnische Mindestanforderungen als Grundlage für die Erstellung von EXAP Berichten zum Zwecke der Austauschbarkeit von Baubeschlägen von flammhemmenden und/oder rauchdichten Toren, Türen und zu öffnenden Fenstern.
Dieses Dokument legt die Leistungsmerkmale für und die Anforderungen an Baubeschläge fest, die in den entsprechenden Produktnormen zu finden sind.
Quincaillerie pour le bâtiment - Fiche de performance des quincailleries (HPS) - Identification et récapitulatif des essais justificatifs visant à faciliter l'interchangeabilité des quincailleries de bâtiment destinés à être installées sur des blocs portes et fenêtre ouvrantes résistant au feu et pare fumées
Le présent document résume les résultats et les classifications pertinents à partir d’essais portant sur les performances de résistance au feu et à la fumée de la quincaillerie de bâtiment, sous la forme d’une HPS. Le présent document fournit des conseils et des prescriptions portant sur les données minimales requises comme base pour la préparation des rapports EXAP sur l’interchangeabilité de la quincaillerie de bâtiment des portes et fenêtres ouvrantes ignifugées et/ou étanches à la fumée.
Le présent document identifie les caractéristiques de performances et les prescriptions pour la quincaillerie de bâtiment qui peuvent figurer dans les normes de produits appropriées.
Stavbno okovje - Specifikacije - Identifikacija in povzetek revizijskih dokazov v podporo zamenljivosti za gradbeno okovje za uporabo pri požarno odpornih in za dim neprepustnih vratih in oknih, ki se odpirajo
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN 16035:2022
01-oktober-2022
Stavbno okovje - Specifikacije - Identifikacija in povzetek revizijskih dokazov v
podporo zamenljivosti za gradbeno okovje za uporabo pri požarno odpornih in zadim neprepustnih vratih in oknih, ki se odpirajo
Hardware performance sheet (HPS) - Identification and summary of test evidence to
facilitate the inter-changeability of building hardware for application to fire resisting
and/or smoke control doorsets and/or openable windowsLeistungsbeschreibung für Baubeschläge - Identifizierung und Zusammenfassung der
Prüfnachweise zur Unterstützung der Austauschbarkeit von Baubeschlägen für die
Anwendung an feuerwiderstandsfähigen und/oder rauchdichten Toren, Türen und/oder
zu öffnenden Fenstern
Quincaillerie pour le bâtiment - Fiche de performance des quincailleries (HPS) -
Identification et récapitulatif des essais justificatifs visant à faciliter l'interchangeabilité
des quincailleries de bâtiment destinés à être installées sur des blocs portes et fenêtre
ouvrantes résistant au feu et pare fuméesTa slovenski standard je istoveten z: prEN 16035
ICS:
13.220.50 Požarna odpornost Fire-resistance of building
gradbenih materialov in materials and elements
elementov
91.190 Stavbna oprema Building accessories
oSIST prEN 16035:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------oSIST prEN 16035:2022
---------------------- Page: 2 ----------------------
oSIST prEN 16035:2022
DRAFT
EUROPEAN STANDARD
prEN 16035
NORME EUROPÉENNE
EUROPÄISCHE NORM
August 2022
ICS 91.190 Will supersede EN 16035:2012
English Version
Hardware performance sheet (HPS) - Identification and
summary of test evidence to facilitate the inter-
changeability of building hardware for application to fire
resisting and/or smoke control doorsets and/or openable
windows
Quincaillerie pour le bâtiment - Fiche de performance Leistungsbeschreibung für Baubeschläge -
des quincailleries (HPS) - Identification et récapitulatif Identifizierung und Zusammenfassung der
des essais justificatifs visant à faciliter Prüfnachweise zur Unterstützung derl'interchangeabilité des quincailleries de bâtiment Austauschbarkeit von Baubeschlägen für die
destinés à être installées sur des blocs portes et fenêtre Anwendung an feuerwiderstandsfähigen und/oder
ouvrantes résistant au feu et pare fumées rauchdichten Toren, Türen und/oder zu öffnenden
FensternThis draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 33.If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 16035:2022 E
worldwide for CEN national Members.---------------------- Page: 3 ----------------------
oSIST prEN 16035:2022
prEN 16035:2022 (E)
Contents Page
European foreword ............................................................................................................................................. 3
Introduction .......................................................................................................................................................... 4
1 Scope .......................................................................................................................................................... 5
2 Normative references .......................................................................................................................... 5
3 Terms and definitions ......................................................................................................................... 6
4 General principles of the Hardware Performance Sheet (HPS) ........................................... 6
4.1 General ...................................................................................................................................................... 6
5 Data to be provided .............................................................................................................................. 7
5.1 General ...................................................................................................................................................... 7
5.2 Required data — Building hardware ............................................................................................. 7
5.3 Required data — test evidence used .............................................................................................. 7
5.4 Performance level(s) related to the evidence fire resistance ............................................... 9
5.5 Performance level(s) related to the evidence fire resistance .............................................10
5.6 Performance level(s) related to the durability of self-closing ............................................11
Annex A (informative) Structure and HPS scheme ..............................................................................12
Bibliography ........................................................................................................................................................13
---------------------- Page: 4 ----------------------oSIST prEN 16035:2022
prEN 16035:2022 (E)
European foreword
This document (prEN 16035:2022) has been prepared by Technical Committee CEN/TC 033 “Doors,
windows, shutters, building hardware and curtain walling”, the secretariat of which is held by AFNOR.
This document is currently submitted to the CEN Enquiry.This document will supersede EN 16035:2012.
In comparison with the previous edition, the following significant technical modifications have been
made:Modified clauses, paragraphs, annexes, tables or figures:
— The structure has been redesigned;
— Additional requirements added for information on thermal separation, isolation, intumescent layer,
related EXAP standards and rules;New normative reference:
— The EN 17020 series of durability of self-closing EXAP standards are now available;
Deleted normative references:— EN 1154: this standard is no longer referred to;
— EN 14600: this standard has been withdrawn.
---------------------- Page: 5 ----------------------
oSIST prEN 16035:2022
prEN 16035:2022 (E)
Introduction
The Hardware Performance Sheet (HPS) is intended to facilitate the interaction between the available
data from completed tests and the data required for the interchangeability assessment.
For this purpose, this document defines the required data, which can be provided in a standardized data
format for the assessment of interchangeability according to the respective Extended Application Rule
(EXAP) from the EN 15269 series or EN 17020 series.This document is primarily addressed to the creators of an HPS as well as to the creators of EXAP reports.
This document is designed to replace a short test report for building hardware in the future, if it proves
its usefulness.For the purposes of this document, the term “doorset” is used as a general term to cover pedestrian
doorsets and industrial, commercial and/or garage doorsets.---------------------- Page: 6 ----------------------
oSIST prEN 16035:2022
prEN 16035:2022 (E)
1 Scope
This document summarizes relevant results and classifications from tests of the fire and smoke resistance
performance of building hardware in the format of a hardware performance sheet (HPS). This document
provides guidance and requirements on the minimum data required as a basis for the preparation of
EXAP reports for the interchangeability of building hardware on fire-retardant and/or smoke-tight doors
and openable windows.This document identifies the performance characteristics and the requirements for building hardware
which can be found in the appropriate product standards.2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
EN 1191, Windows and doors - Resistance to repeated opening and closing - Test method
EN 1634-1:2014+A1:2018, Fire resistance and smoke control tests for door and shutter assemblies,
openable windows and elements of building hardware - Part 1: Fire resistance test for door and shutter
assemblies and openable windowsEN 1634-2, Fire resistance and smoke control tests for door, shutter and openable window assemblies and
elements of building hardware - Part 2: Fire resistance characterisation test for elements of building
hardwareEN 1634-3, Fire resistance and smoke control tests for door and shutter assemblies, openable windows and
elements of building hardware - Part 3: Smoke control test for door and shutter assemblies
EN 12604, Industrial, commercial and garage doors and gates - Mechanical aspects - Requirements and test
methodsEN 13501-2, Fire classification of construction products and building elements - Part 2: Classification using
data from fire resistance tests, excluding ventilation servicesEN 15269 (all parts), Extended application of test results for fire resistance and/or smoke control for door,
shutter and openable window assemblies including their elements of building hardware
EN 16034, Pedestrian doorsets, industrial, commercial, garage doors and openable windows - Product
standard, performance characteristics - Fire resisting and/or smoke control characteristics
EN 17020 (all parts), Extended application of test results on durability of self-closing for doorsets and
openable windows---------------------- Page: 7 ----------------------
oSIST prEN 16035:2022
prEN 16035:2022 (E)
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
3.1
doorset
pedestrian doorset, industrial, commercial and/or garage doorset, rolling shutter and/or operable fabric
curtains including any frame or guide, door leaf or leaves, rolling or folding curtain, etc., which is provided
to give a fire resisting and/or smoke control capability when used for the closing of permanent openings
in fire resisting separating elementsNote 1 to entry: Including any side panel(s), vision panel(s), flush over panel(s), transom panel(s) and/or glazing
together with the building hardware and any seals (whether provided for the purpose of fire resistance or smoke
control or for other purposes such as draught or acoustics).Note 2 to entry: The assembly and fulfilling the provisions of this document
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.