EN 1527:2019+A1:2021
(Main)Building hardware - Hardware for sliding doors and folding doors - Requirements and test methods
Building hardware - Hardware for sliding doors and folding doors - Requirements and test methods
This document specifies requirements for the design manual system sliding doors, sliding corner doors and folding doors of the bi-fold type and multi-panel folding doors but excluding doors and panels. Cycle tests, static load, initial friction and corrosion resistance tests are included for fittings and track only.
This document covers door gear for all industrial, commercial and residential sliding doors and folding doors.
This document does not cover the rollers for horizontal sliding and building hardware for inward or outward sliding folding windows (types N Q, R and S) in accordance with EN 13126-15, building hardware for Lift and Slide windows (type P) in accordance with EN 13126-16 and building hardware for Tilt and Slide windows (type T) in accordance with EN 13126-17.
Schlösser und Baubeschläge - Beschläge für Schiebetüren/-tore und Falttüren/-tore - Anforderungen und Prüfverfahren
Dieses Dokument legt Anforderungen an die Konstruktion des manuellen Systems für Schiebetüren/-tore, Schiebetüren/-tore mit Eckumlenkung sowie zwei- und mehrflügelige Falttüren/-tore fest, schließt jedoch die Türen/Tore und Tür-/Torflügel selbst aus. Zyklische Prüfungen, statische Beanspruchungen, Anfangsreibung und Prüfungen der Korrosionsbeständigkeit werden nur für Beschläge und Führungsschienen behandelt.
Dieses Dokument behandelt Laufwerke für sämtliche Schiebetüren/-tore und Falttüren/-tore, die im Industrie-, Gewerbe- sowie Wohnbereich eingesetzt werden.
Dieses Dokument gilt nicht für Rollen für Horizontalschiebevorrichtungen und Baubeschläge für nach innen oder außen öffnende Faltschiebe Fenster (Bauarten N, Q, R und S) nach EN 13126 15, Baubeschläge für Hebeschiebe Fenster (Bauart P) nach EN 13126 16 und Baubeschläge für Kippschiebe Fenster (Bauart T) nach EN 13126 17.
Quincaillerie du bâtiment - Quincaillerie pour portes coulissantes et portes pliantes - Exigences et méthodes d'essai
Le présent document ne spécifie les exigences relatives aux systèmes de conception des portes coulissantes, portes à déplacement latéral et portes pliantes manuelles à deux panneaux et pour portes pliantes multi-panneaux, à l'exclusion des portes elles-mêmes et des panneaux. Les essais d'endurance, de résistance statique, de friction initiale et de résistance à la corrosion s'appliquent uniquement aux accessoires et au rail.
Le présent document s'applique aux composants de toutes les portes coulissantes et portes pliantes, industrielles, commerciales et résidentielles.
Le présent document ne couvre pas les roulements pour fenêtres coulissantes à l’horizontale et les ferrures pour fenêtres accordéon à ouverture vers l’intérieur ou l’extérieur (types N Q, R et S) conformément à l'EN 13126 15, les ferrures pour portes-fenêtres et fenêtres coulissantes à levage (type P) conformément à l'EN 13126 16 et les ferrures pour fenêtres et portes-fenêtres oscillo-coulissantes (type T) conformément à l'EN 13126 17.
Stavbno okovje - Okovje za drsna in zgibna vrata - Zahteve in preskusne metode (vključuje dopolnilo A1)
Ta dokument določa zahteve za načrtovanje okovja drsnih vrat, kotnih drsnih vrat in zgibnih vrat, dvodelnih in z več paneli, vendar ne zajema vrat in panelov. Ciklični preskusi in preskusi statične obremenitve, začetnega trenja ter odpornosti na korozijo so vključeni samo za fitinge in vodila.
Ta dokument zajema vratni mehanizem za vsa drsna in zgibna vrata za industrijsko, poslovno ter stanovanjsko uporabo.
Ta dokument ne zajema valjev za vodoravno drsno in stavbno okovje za navznoter in navzven zgibno drsna okna (tipi N, Q, R in S) v skladu s standardom EN 13126-15, stavbno okovje za dvižno-drsna okna (tip P) v skladu s standardom EN 13126-16 in stavbno okovje za nagibno-drsna okna (tip T) v skladu s standardom EN 13126-17.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-februar-2022
Nadomešča:
SIST EN 1527:2019
Stavbno okovje - Okovje za drsna in zgibna vrata - Zahteve in preskusne metode
(vključuje dopolnilo A1)
Building hardware - Hardware for sliding doors and folding doors - Requirements and
test methods
Schlösser und Baubeschläge - Beschläge für Schiebetüren/-tore und Falttüren/-tore -
Anforderungen und PrüfverfahrenPrüfverfahren
Quincaillerie du bâtiment - Quincaillerie pour portes coulissantes et portes pliantes -
Exigences et méthodes d'essai
Ta slovenski standard je istoveten z: EN 1527:2019+A1:2021
ICS:
91.190 Stavbna oprema Building accessories
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN 1527:2019+A1
EUROPEAN STANDARD
NORME EUROPÉENNE
December 2021
EUROPÄISCHE NORM
ICS 91.190 Supersedes EN 1527:2019
English Version
Building hardware - Hardware for sliding doors and
folding doors - Requirements and test methods
Quincaillerie du bâtiment - Quincaillerie pour portes Schlösser und Baubeschläge - Beschläge für
coulissantes et portes pliantes - Exigences et méthodes Schiebetüren/-tore und Falttüren/-tore -
d'essai Anforderungen und PrüfverfahrenPrüfverfahren
This European Standard was approved by CEN on 7 July 2019 and includes Amendment 1 approved by CEN on 6 July 2021.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 1527:2019+A1:2021 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Classification . 8
4.1 General . 8
4.2 Category of door (1st digit) . 8
4.3 Door mass (2nd digit) . 8
4.4 Size of Test Panel Used (3rd digit) . 8
4.5 Corrosion resistance (4th digit). 9
4.6 Slam test resistance (5th digit) . 9
4.7 Horizontal static load test resistance (6th digit) . 9
4.8 Static load test resistance (7th digit) . 9
4.9 Initial friction maximum permitted value (8th digit) . 9
4.10 Durability (9th digit).10
4.11 Example of classification .10
5 Requirements .10
5.1 Criteria for assessing performances .10
5.2 General .11
5.3 Performance requirements for sliding doors and folding door fittings .11
6 Test methods .12
6.1 Test apparatus.12
6.2 Preparation and installation of the fittings for tests .12
6.3 Test methods .13
7 Interchangeability .22
8 Obligations of the manufacturer .22
9 Marking .22
Bibliography .23
European foreword
This document (EN 1527:2019+A1:2021) has been prepared by Technical Committee CEN/TC 33 “Doors,
windows, shutters, building hardware and curtain walling”, the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by June 2022, and conflicting national standards shall be
withdrawn at the latest by June 2022.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document includes Amendment 1 approved by CEN on 6 July 2021.
This document supersedes !EN 1527:2019".
The start and finish of text introduced or altered by amendment is indicated in the text by tags !".
Compared with EN 1527:2013, the following major change has been made:
— a new category was added: Cantilever gates (Clause 4) and test methods accordingly (Clause 6).
Any feedback and questions on this document should be directed to the users’ national standards body.
A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland,
Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of North
Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United
Kingdom.
1 Scope
This document specifies requirements for the design of manual system sliding doors, sliding corner doors
and folding doors of the bi-fold type and multi-panel folding doors but excluding doors and panels. Cycle
tests, static load, initial friction and corrosion resistance tests are included for fittings and track only.
This document covers door gear for all industrial, commercial and residential sliding doors and folding
doors.
This document does not cover the rollers for horizontal sliding and building hardware for inward or
outward sliding folding windows (types N Q, R and S) in accordance with EN 13126-15, building
hardware for Lift and Slide windows (type P) in accordance with EN 13126-16 and building hardware
for Tilt and Slide windows (type T) in accordance with EN 13126-17.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
EN 1670, Building hardware — Corrosion resistance — Requirements and test methods
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
— IEC Electropedia: available at http://www.electropedia.org/
— ISO Online browsing platform: available at http://www.iso.org/obp
3.1
door
building product which closes an opening, moving via the methods described in this specification,
including not limited to doors, gates, garage doors and cantilever gates
3.2
aligner
fitting which retains a folding door in a flat and aligned closed position
Note 1 to entry: See Figure 1, point 8 of the key.
3.3
bottom guide
fitting which, with a bottom guide channel, controls the lateral movement of a sliding or folding top
hanging door
3.4
bottom guide channel
channel section fitted either to the base of a structure or the bottom edge of a door to accommodate the
bottom guide
3.5
bottom pivot
axis fitted to the bottom of a folding door which turns in a bottom pivot socket
Note 1 to entry: See Figure 1, point 6 of the key.
3.6
bottom pivot socket
fixed component in which the bottom pivot of a folding door is located
Note 1 to entry: See Figure 1, point 7 of the key.
3.7
bottom track
track fixed to the base of a structure or floor, on which bottom rollers run
3.8
bottom roller
fitting attached to the bottom of a door which allows it to run on a bottom track
3.9
folding door, bi-fold type
door formed by two panels connected by hinges and operating on pivots running in a top track with guide
3.10
heavy sliding door, bottom rolling
door of mass 100 kg or more with bottom rollers running on a bottom track fixed to the base of the
structure or floor, and with a top guide
3.11
heavy sliding door, top hanging
door of mass 200 kg or more which is suspended by top hangers running in a top track fixed to an
overhead structural component, and with a bottom guide
3.12
hinge
fitting connecting two panels of a folding door
Note 1 to entry: See Figure 1, point 5 of the key.
3.13
light sliding door, top hanging
door of mass less than 200 kg which is suspended by top hangers running in a top track fixed to an
overhead structural component, and with a bottom guide
3.14
light sliding door, bottom rolling
door of mass less than 100 kg with bottom rollers running on a bottom track fixed to the base of the
structure or floor, and with a top guide
3.15
multi-panel folding door
door formed by two or more panels connected by hinges and suspended by top hangers running in a top
track fixed to an overhead structural component, or running on bottom rollers with a top guide in a top
track
3.16
stop
fitting used to stop a sliding door at the end of its run
3.17
damping device
device, with or without additional functions, which allows shocks to be absorbed during the final
movement operation of a sliding door (and which prevents a sliding system being damaged)
3.18
test cycle
all operations from the closed position, to open the test door to the required position and close it again
to the closed position
3.19
bracket
support used to carry a top track and secure it to the structure of a building
Note 1 to entry: Brackets can be side-wall fixing or ceiling fixing, adjustable or non-adjustable.
3.20
top guide
fitting which, with a top guide track, controls the lateral movement of a bottom rolling sliding door
3.21
top guide track
track fixed to the top of the structure in which a top guide runs
3.22
top hanger
roller fixed to a top hanging sliding door which allows it to move laterally
3.23
top pivot
axis fitted to the top of a folding door, which turns in a top pivot socket
Note 1 to entry: See Figure 1, point 4 of the key.
3.24
top pivot socket
fixed component in which the top pivot is located
Note 1 to entry: See Figure 1, point 2 of the key.
3.25
top track
section that carries the hangers of sliding and folding top hanging doors
Note 1 to entry: See Figure 1, point 1 of the key.
3.26
cantilever gate
slide door used outside that is supported from track that is fixed below the structure and hangers that
are fixed to the gr
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.