EN ISO 17701:2016

Footwear - Test methods for uppers, lining and insocks - Colour migration (ISO 17701:2016)

ISO 17701:2016 discolouration of another material when stored in close contact. This method is applicable to all materials which are used in intimate contact to adhesives which are used to bond them.

Schuhe - Prüfverfahren für Obermaterialien, Futter und Decksohlen - Farbmigration (ISO 17701:2016)

Diese Internationale Norm legt ein Prüfverfahren zur Bestimmung der Neigung eines Werkstoffs, bei Aufbewahrung in engem Kontakt mit einem anderen Werkstoff bei diesem eine Verfärbung hervorzurufen, fest. Dieses Verfahren gilt für alle Werkstoffe, die in engem Kontakt mit Klebstoffen verwendet werden, die für deren Kleben verwendet werden.

Chaussures - Méthodes d'essai des tiges, de la doublure et des premières de propreté - Migration de la couleur (ISO 17701:2016)

ISO 17701:2016 spécifie une méthode d'essai permettant de déterminer la propension d'un matériau à provoquer la décoloration d'un autre matériau, lorsqu'ils sont stockés en contact étroit. Cette méthode est applicable à tous les matériaux qui sont utilisés en contact direct avec des adhésifs destinés à les assembler.

Obutev - Preskusne metode za zgornje dele, podloge in vložke - Migracija barve (ISO 17701:2016)

Ta evropski standard določa preskusno metodo za določanje nagnjenosti materiala k razbarvanju drugega materiala pri skupnem shranjevanju. Ta metoda se uporablja za vse materiale, ki se uporabljajo v tesnem stiku, in za lepila, s katerimi so zlepljeni.

General Information

• Status: Published
• Publication Date: 17-May-2016
• Withdrawal Date: 29-Nov-2016
• ICS: 61.060 - Footwear
• Technical Committee: CEN/TC 309 - Footwear
• Drafting Committee: CEN/TC 309/WG 1 - Minimum performance requirements and test methods for components for footwear
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 18-May-2016
• Due Date: 06-Nov-2014
• Completion Date: 18-May-2016
• Ref Project: SIST EN ISO 17701:2016 - Footwear - Test methods for uppers, lining and insocks - Colour migration (ISO 17701:2016)

Relations

• Replaces: EN 13517:2001 - Footwear - Test methods for uppers, lining and insocks - Colour migration
• Effective Date: 05-Nov-2011

Standards Content (Sample)

SLOVENSKI STANDARD
01-julij-2016
1DGRPHãþD
SIST EN 13517:2004
Obutev - Preskusne metode za zgornje dele, podloge in vložke - Migracija barve
(ISO 17701:2016)
Footwear - Test methods for uppers, lining and insocks - Colour migration (ISO
17701:2016)
Schuhe - Prüfverfahren für Obermaterialien, Futter und Decksohlen - Farbmigration (ISO
17701:2016)
Chaussures - Méthodes d'essai des tiges, de la doublure et des garnitures intérieures -
Migration de la couleur (ISO 17701:2016)
Ta slovenski standard je istoveten z: EN ISO 17701:2016
ICS:
61.060 Obuvala Footwear
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 17701
EUROPEAN STANDARD
NORME EUROPÉENNE
May 2016
EUROPÄISCHE NORM
ICS 61.060 Supersedes EN 13517:2001
English Version
Footwear - Test methods for uppers, lining and insocks -
Colour migration (ISO 17701:2016)
Chaussures - Méthodes d'essai des tiges, de la doublure Schuhe - Prüfverfahren für Obermaterialien, Futter und
et des premières de propreté - Migration de la couleur Decksohlen - Farbmigration (ISO 17701:2016)
(ISO 17701:2016)
This European Standard was approved by CEN on 15 April 2016.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 17701:2016 E
worldwide for CEN national Members.

Contents Page
European foreword . 3

European foreword
This document (EN ISO 17701:2016) has been prepared by Technical Committee ISO/TC 216
“Footwear” in collaboration with Technical Committee CEN/TC 309 “Footwear” the secretariat of which
is held by AENOR.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by November 2016, and conflicting national standards
shall be withdrawn at the latest by November 2016.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent
rights.
This document supersedes EN 13517:2001.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 17701:2016 has been approved by CEN as EN ISO 17701:2016 without any modification.

INTERNATIONAL ISO
STANDARD 17701
Second edition
2016-05-01
Footwear — Test methods for uppers,
lining and insocks — Colour migration
Chaussures — Méthodes d’essai des tiges, de la doublure et des
premières de propreté — Migration de la couleur
Reference number
ISO 17701:2016(E)
©
ISO 2016
ISO 17701:2016(E)
© ISO 2016, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. [phone]
Fax [phone]
[e-mail]
www.iso.org
ii © ISO 2016 – All rights reserved

ISO 17701:2016(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Apparatus and material . 1
5 Sampling and conditioning . 2
5.1 Testing for colour migration between materials . 2
5.2 Testing for the effect of adhesives . 2
5.3 Testing for the effect of adhesives in laminate . 2
5.4 Testing components such as soling . 3
6 Test method . 3
6.1 Principle . 3
6.2 Procedure . 3
7 Test report . 4
ISO 17701:2016(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the d
...