EN ISO 20535:2022
(Main)Footwear - Test method for insoles and insocks - Dimensional change after cycle of wetting and drying (ISO 20535:2019)
Footwear - Test method for insoles and insocks - Dimensional change after cycle of wetting and drying (ISO 20535:2019)
This document specifies a method for determining the dimensional change of footwear insoles and insocks after cycle wetting and drying regardless of the material.
Schuhe - Prüfverfahren für Brandsohlen und Decksohlen - Maßänderung nach einem Zyklus aus Wasserlagerung und Trocknen (ISO 20535:2019)
Chaussures - Méthode d'essai relative aux premières de montage et de propreté - Variations dimensionnelles après un cycle de mouillage et de séchage (ISO 20535:2019)
Le présent document spécifie une méthode pour déterminer les variations dimensionnelles des premières de montage et de propreté des chaussures après un cycle de mouillage et de séchage, indépendamment du matériau utilisé.
Obutev - Preskusna metoda za notranjike in vložke - Dimenzijske spremembe po ciklu vlaženja in sušenja (ISO 20535:2019)
Ta dokument določa metodo za ugotavljanje dimenzijske spremembe notranjikov in vložkov obutve po ciklu vlaženja in sušenja ne glede na material.
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 20535:2022
01-september-2022
Obutev - Preskusna metoda za notranjike in vložke - Dimenzijske spremembe po
ciklu vlaženja in sušenja (ISO 20535:2019)
Footwear - Test method for insoles and insocks - Dimensional change after cycle of
wetting and drying (ISO 20535:2019)
Schuhe - Prüfverfahren für Brandsohlen und Decksohlen - Maßänderung nach einem
Zyklus aus Wasserlagerung und Trocknen (ISO 20535:2019)
Chaussures - Méthode d'essai relative aux premières de montage et de propreté -
Variations dimensionnelles après un cycle de mouillage et de séchage (ISO 20535:2019)
Ta slovenski standard je istoveten z: EN ISO 20535:2022
ICS:
61.060 Obuvala Footwear
SIST EN ISO 20535:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 20535:2022
---------------------- Page: 2 ----------------------
SIST EN ISO 20535:2022
EN ISO 20535
EUROPEAN STANDARD
NORME EUROPÉENNE
August 2022
EUROPÄISCHE NORM
ICS 61.060
English Version
Footwear - Test method for insoles and insocks -
Dimensional change after cycle of wetting and drying (ISO
20535:2019)
Chaussures - Méthode d'essai relative aux premières Schuhe - Prüfverfahren für Brandsohlen und
de montage et de propreté - Variations Decksohlen - Maßänderung nach einem Zyklus aus
dimensionnelles après un cycle de mouillage et de Wasserlagerung und Trocknen (ISO 20535:2019)
séchage (ISO 20535:2019)
This European Standard was approved by CEN on 17 July 2022.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 20535:2022 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 20535:2022
EN ISO 20535:2022 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 20535:2022
EN ISO 20535:2022 (E)
European foreword
The text of ISO 20535:2019 has been prepared by Technical Committee ISO/TC 216 "Footwear” of the
International Organization for Standardization (ISO) and has been taken over as EN ISO 20535:2022 by
Technical Committee CEN/TC 309 “Footwear” the secretariat of which is held by UNE.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by February 2023, and conflicting national standards
shall be withdrawn at the latest by February 2023.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national standards body.
A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO 20535:2019 has been approved by CEN as EN ISO 20535:2022 without any modification.
3
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.