FprEN 10348
(Main)Steel for the reinforcement of concrete - Galvanized reinforcing steel products
Steel for the reinforcement of concrete - Galvanized reinforcing steel products
This document specifies requirements for hot dip galvanized reinforcing steel in the form of products which meet the requirements of EN 10080 and subjected, where appropriate, to further processing, e.g. bars, bent bars, stirrups, products straightened from coils, products cut from bars, welded structures and any other components fabricated for use in the reinforcement of concrete.
This document does not apply to hot dip galvanized reinforcement for prestressing or components of these reinforcements.
Stahl für die Bewehrung von Beton - Verzinkte Betonstahlerzeugnisse
Dieses Dokument legt Anforderungen an feuerverzinkten Betonstahl in Form von Erzeugnissen nach EN 10080 die, falls zutreffend, zur Weiterverarbeitung bestimmt sind, wie z. B. Stäbe, gebogene Stäbe, Bügel, gerichtete Erzeugnisse aus Ringen, abgelängte Stäbe, Schweißkonstruktionen sowie andere Erzeugnisse, die für die Bewehrung von Beton eingesetzt sind, fest.
Dieses Dokument gilt nicht für feuerverzinkte Bewehrungen zum Vorspannen oder Bestandteile für diese Bewehrungen.
Aciers pour béton armé - Produits en acier galvanisés pour l'armature du béton
Le présent document spécifie les exigences relatives aux aciers galvanisés par immersion à chaud pour béton armé sous la forme de produits conformes aux exigences de l’EN 10080 et soumis, le cas échéant, à une transformation ultérieure par exemple barres, barres cintrées, étriers, produits redressés à partir de couronnes, produits découpés dans des barres, structures soudées et tous les autres composants fabriqués pour une utilisation dans l'armature du béton.
Le présent document ne s’applique pas aux armatures de précontrainte galvanisées par immersion à chaud ou aux composants de ces armatures.
Jekla za armiranje betona - Pocinkana jekla za armiranje izdelkov
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN 10348:2023
01-april-2023
Jekla za armiranje betona - Pocinkana jekla za armiranje izdelkov
Steel for the reinforcement of concrete - Galvanized reinforcing steel products
Stahl für die Bewehrung von Beton - Verzinkte Betonstahlerzeugnisse
Aciers pour béton armé - Produits en acier galvanisés pour l'armature du béton
Ta slovenski standard je istoveten z: prEN 10348
ICS:
77.140.15 Jekla za armiranje betona Steels for reinforcement of
concrete
oSIST prEN 10348:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 10348:2023
---------------------- Page: 2 ----------------------
oSIST prEN 10348:2023
DRAFT
EUROPEAN STANDARD
prEN 10348
NORME EUROPÉENNE
EUROPÄISCHE NORM
February 2023
ICS 77.140.15 Will supersede EN 10348-2:2018
English Version
Steel for the reinforcement of concrete - Galvanized
reinforcing steel products
Aciers pour béton armé - Produits en acier galvanisés Stahl für die Bewehrung von Beton - Verzinkte
pour l'armature du béton Betonstahlerzeugnisse
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 459/SC 4.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 10348:2023 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 10348:2023
prEN 10348:2023 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Symbols . 5
5 Materials . 6
5.1 Reinforcing steel . 6
5.2 Zinc melt . 6
5.3 Repair material . 7
6 Designation. 7
7 Information to be supplied at the time of enquiry and order . 7
8 Galvanizing . 7
8.1 Coating application .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.