EN 4165-026:2024
(Main)Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 026: Accessories for single module connector - Product standard
Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 026: Accessories for single module connector - Product standard
This document specifies accessories of single modules connectors according to EN 4165 024 and EN 4165 025 used in the family of rectangular electrical connectors, operating temperature 175 °C continuous.
Luft- und Raumfahrt - Elektrischer Rechtecksteckverbinder in modularer Bauweise - Betriebstemperatur 175 °C konstant - Teil 026: Endgehäuse für Steckverbinder für Einzelmodule - Produktnorm
Série aérospatiale - Connecteurs électriques rectangulaires modulaires - Température d’utilisation 175 °C continu - Partie 026: Accessoires pour connecteur mono-module - Norme de produit
Le présent document spécifie les accessoires pour connecteurs mono-modules conformément à l’EN 4165 024 et l’EN 4165 025, utilisés dans la famille des connecteurs électriques rectangulaires modulaires, température d'utilisation 175 °C continu.
Aeronavtika - Konektor, električni, pravokotni, modularni - Stalna delovna temperatura 175 °C - 026. del: Zaslonjeni pribor za enojne module - Standard za proizvod
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN 4165-026:2021
01-oktober-2021
Aeronavtika - Konektor, električni, pravokotni, modularni - Stalna delovna
temperatura 175 °C - 026. del: Zaslonjeni pribor za enojne module - Standard za
proizvod
Aerospace Series - Connector, electrical, rectangular, modular - Operating temperatures
175°C continuous - Part 026: Shielded accessories for single module - Product standard
Luft- und Raumfahrt - Elektrischer Rechtecksteckverbinder in modularer Bauweise -
Betriebstemperatur 175 °C konstant - Teil 026: Endgehäuse für Steckverbinder für
Einzelmodule - Produktnorm
Ta slovenski standard je istoveten z: prEN 4165-026
ICS:
31.220.10 Vtiči in vtičnice, konektorji Plug-and-socket devices.
Connectors
49.060 Letalska in vesoljska Aerospace electric
električna oprema in sistemi equipment and systems
oSIST prEN 4165-026:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
oSIST prEN 4165-026:2021
oSIST prEN 4165-026:2021
DRAFT
EUROPEAN STANDARD
prEN 4165-026
NORME EUROPÉENNE
EUROPÄISCHE NORM
August 2021
ICS 49.060 Will supersede EN 4165-026:2018
English Version
Aerospace Series - Connector, electrical, rectangular,
modular - Operating temperatures 175°C continuous - Part
026: Shielded accessories for single module - Product
standard
Luft- und Raumfahrt - Elektrischer
Rechtecksteckverbinder in modularer Bauweise -
Betriebstemperatur 175 °C konstant - Teil 026:
Endgehäuse für Steckverbinder für Einzelmodule -
Produktnorm
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee ASD-
STAN.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 4165-026:2021 E
worldwide for CEN national Members.
oSIST prEN 4165-026:2021
prEN 4165-026:2021 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Required characteristics . 4
4.1 Shielded accessories for single module connector . 4
4.1.1 General. 4
4.1.2 Straight accessory — Without type code . 7
4.1.3 Straight accessory with cable tie device — Type code A . 8
4.1.4 Accessory with angle of 45° — Without type code . 9
4.1.5 Accessory with angle of 45° and cable tie device — Type code A . 10
4.1.6 Accessory with angle of 90° — Without type code . 11
4.1.7 Accessory with angle of 90° and cable tie device — Type code A . 12
4.2 Unplated composite accessories for single module connector . 13
4.2.1 Accessory with universal angle — Type code C . 13
4.2.2 Accessory with universal angle — Type code D . 14
4.2.3 Accessory with universal angle — Type code U . 15
4.3 Class . 16
5 Designation . 16
6 Marking . 17
7 Technical specification . 17
Bibliography . 18
oSIST prEN 4165-026:2021
prEN 4165-026:2021 (E)
European foreword
This document (prEN 4165-026:2021) has been prepared by the Aerospace and Defence Industries
Association of Europe — Standardization (ASD-STAN).
After enquirie
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.