SIST EN 4165-026:2025

Aerospace Series - Connector, electrical, rectangular, modular - Operating temperatures 175°C continuous - Part 026: Shielded accessories for single module - Product standard

This document specifies accessories of single modules connectors according to EN 4165 024 and EN 4165 025 used in the family of rectangular electrical connectors, operating temperature 175 °C continuous.

Luft- und Raumfahrt - Elektrischer Rechtecksteckverbinder in modularer Bauweise - Betriebstemperatur 175 °C konstant - Teil 026: Endgehäuse für Steckverbinder für Einzelmodule - Produktnorm

Série aérospatiale - Connecteurs électriques rectangulaires modulaires - Température d’utilisation 175 °C continu - Partie 026: Accessoires pour connecteur mono-module - Norme de produit

Le présent document définit les accessoires pour connecteurs mono-modules conformément aux EN 4165-024 et EN 4165-025 utilisés dans la famille des connecteurs électriques rectangulaires, température d'utilisation 175 °C continu.

Aeronavtika - Konektor, električni, pravokotni, modularni - Stalna delovna temperatura 175 °C - 026. del: Zaslonjeni pribor za enojne module - Standard za proizvod

General Information

• Status: Published
• Public Enquiry End Date: 27-Oct-2021
• Publication Date: 08-Dec-2024
• ICS: 31.220.10 - Plug-and-socket devices. Connectors
• ICS: 49.060 - Aerospace electric equipment and systems
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 02-Dec-2024
• Due Date: 06-Feb-2025
• Completion Date: 09-Dec-2024
• Ref Project: EN 4165-026:2024 - Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 026: Accessories for single module connector - Product standard

Relations

• Revised: SIST EN 4165-026:2019 - Aerospace series - Connector, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 026: Accessories for single module connector - Product standard
• Effective Date: 19-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
01-januar-2025
Aeronavtika - Konektor, električni, pravokotni, modularni - Stalna delovna
temperatura 175 °C - 026. del: Zaslonjeni pribor za enojne module - Standard za
proizvod
Aerospace Series - Connector, electrical, rectangular, modular - Operating temperatures
175°C continuous - Part 026: Shielded accessories for single module - Product standard
Luft- und Raumfahrt - Elektrischer Rechtecksteckverbinder in modularer Bauweise -
Betriebstemperatur 175 °C konstant - Teil 026: Endgehäuse für Steckverbinder für
Einzelmodule - Produktnorm
Série aérospatiale - Connecteurs électriques rectangulaires modulaires - Température
d’utilisation 175 °C continu - Partie 026: Accessoires pour connecteur mono-module -
Norme de produit
Ta slovenski standard je istoveten z: EN 4165-026:2024
ICS:
31.220.10 Vtiči in vtičnice, konektorji Plug-and-socket devices.
Connectors
49.060 Letalska in vesoljska Aerospace electric
električna oprema in sistemi equipment and systems
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN 4165-026
EUROPEAN STANDARD
NORME EUROPÉENNE
November 2024
EUROPÄISCHE NORM
ICS 49.060 Supersedes EN 4165-026:2018
English Version
Aerospace series - Connectors, electrical, rectangular,
modular - Operating temperature 175 °C continuous - Part
026: Accessories for single module connector - Product
standard
Série aérospatiale - Connecteurs électriques Luft- und Raumfahrt - Elektrischer
rectangulaires modulaires - Température d'utilisation Rechtecksteckverbinder in modularer Bauweise -
175 °C continu - Partie 026: Accessoires pour Betriebstemperatur 175 °C konstant - Teil 026:
connecteur mono-module - Norme de produit Endgehäuse für Steckverbinder für Einzelmodule -
Produktnorm
This European Standard was approved by CEN on 5 February 2024.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 4165-026:2024 E
worldwide for CEN national Members.

Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Required characteristics . 4
4.1 Shielded accessories for single module connector . 4
4.1.1 General. 4
4.1.2 Straight accessory — Without type code . 7
4.1.3 Straight accessory with cable tie device — Type code A . 8
4.1.4 Accessory with angle of 45° — Without type code . 9
4.1.5 Accessory with angle of 45° and cable tie device — Type code A . 10
4.1.6 Accessory with angle of 90° — Without type code . 11
4.1.7 Accessory with angle of 90° and cable tie device — Type code A . 12
4.2 Unplated composite accessories for single module connector . 13
4.2.1 Accessory with universal angle — Type code C . 13
4.2.2 Accessory with universal angle — Type code D . 14
4.2.3 Accessory with universal angle — Type code U . 15
4.3 Class . 16
5 Designation . 16
6 Marking . 16
7 Technical specification . 16

European foreword
This document (EN 4165-026:2024) has been prepared by the Aerospace and Defence Industries
Association of Europe — Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this document has
received the approval of the National Associations and the Official Services of the member countries of
ASD-STAN, prior to its presentation to CEN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by May 2025, and conflicting national standards shall be
withdrawn at the latest by May 2025.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held respons
...