EN ISO 12180-2:2011

Geometrical product specifications (GPS) - Cylindricity - Part 2: Specification operators (ISO 12180-2:2011)

ISO 12180-2:2011 specifies the complete specification operator for cylindricity of complete integral features only, i.e. geometrical characteristics of features of type cylinder

Geometrische Produktspezifikation (GPS) - Zylindrizität - Teil 2: Spezifikationsoperatoren (ISO 12180-2:2011)

Dieser Teil von ISO 12180 legt den vollständigen Spezifikationsoperator für Zylindrizität, d. h. geometrische
Merkmale von Geometrieelementen von der Gestalt eines Zylinders, fest.

Spécification géométrique des produits (GPS) - Cylindricité - Partie 2: Opérateurs de spécification (ISO 12180-2:2011)

L'ISO 12180-2:2011 spécifie l'opérateur de spécification complet pour la cylindricité des éléments intégraux complets uniquement, c'est-à-dire pour les caractéristiques géométriques des éléments de type cylindre.

Specifikacija geometrijskih veličin izdelka - Cilindričnost - 2. del: Parametri za specifikacijo (ISO 12180-2:2011)

Ta del ISO 12180 določa celotne parametre za specifikacijo cilindričnosti samo vgrajenih funkcij, tj. geometrijske značilnosti funkcij tipskega cilindra.

General Information

• Status: Published
• Publication Date: 31-Mar-2011
• Withdrawal Date: 30-Oct-2011
• ICS: 17.040.20 - Properties of surfaces
• ICS: 17.040.30 - Measuring instruments
• Technical Committee: CEN/TC 290 - Dimensional and geometrical product specification and verification
• Drafting Committee: CEN/TC 290 - Dimensional and geometrical product specification and verification
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 01-Apr-2011
• Completion Date: 01-Apr-2011
• Ref Project: SIST EN ISO 12180-2:2011 - Geometrical product specifications (GPS) - Cylindricity - Part 2: Specification operators (ISO 12180-2:2011)

Relations

• Replaces: CEN ISO/TS 12180-2:2007 - Geometrical product specifications (GPS) - Cylindricity - Part 2: Specification operators (ISO/TS 12180-2:2003)
• Effective Date: 08-Jun-2022

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Geometrische Produktspezifikation (GPS) - Zylindrizität - Teil 2: Spezifikationsoperatoren (ISO 12180-2:2011)Spécification géométrique des produits (GPS) - Cylindricité - Partie 2: Opérateurs de spécification (ISO 12180-2:2011)Geometrical product specifications (GPS) - Cylindricity - Part 2: Specification operators (ISO 12180-2:2011)17.040.20Lastnosti površinProperties of surfacesICS:Ta slovenski standard je istoveten z:EN ISO 12180-2:2011SIST EN ISO 12180-2:2011en,fr,de01-november-2011SIST EN ISO 12180-2:2011SLOVENSKI
STANDARDSIST-TS CEN ISO/TS 12180-2:20081DGRPHãþD



SIST EN ISO 12180-2:2011



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN ISO 12180-2
April 2011 ICS 17.040.20 Supersedes CEN ISO/TS 12180-2:2007English Version
Geometrical product specifications (GPS) - Cylindricity - Part 2: Specification operators (ISO 12180-2:2011)
Spécification géométrique des produits (GPS) - Cylindricité - Partie 2: Opérateurs de spécification (ISO 12180-2:2011) Geometrische Produktspezifikation (GPS) - Zylindrizität - Teil 2: Spezifikationsoperatoren (ISO 12180-2:2011) This European Standard was approved by CEN on 26 February 2011.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 12180-2:2011: ESIST EN ISO 12180-2:2011



EN ISO 12180-2:2011 (E) 2 Contents Page Foreword .3 SIST EN ISO 12180-2:2011



EN ISO 12180-2:2011 (E) 3 Foreword This document (EN ISO 12180-2:2011) has been prepared by Technical Committee ISO/TC 213 "Dimensional and geometrical product specifications and verification" in collaboration with Technical Committee CEN/TC 290 “Dimensional and geometrical product specification and verification” the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by October 2011, and conflicting national standards shall be withdrawn at the latest by October 2011. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes CEN ISO/TS 12180-2:2007. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Endorsement notice The text of ISO 12180-2:2011 has been approved by CEN as a EN ISO 12180-2:2011 without any modification.
SIST EN ISO 12180-2:2011



SIST EN ISO 12180-2:2011



Reference numberISO 12180-2:2011(E)© ISO 2011
INTERNATIONAL STANDARD ISO12180-2First edition2011-04-01Geometrical product specifications (GPS) — Cylindricity — Part 2: Specification operators Spécification géométrique des produits (GPS) — Cylindricité — Partie 2: Opérateurs de spécification
SIST EN ISO 12180-2:2011



ISO 12180-2:2011(E)
COPYRIGHT PROTECTED DOCUMENT
©
ISO 2011 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address be
...