EN 4470:2007

Aerospace series - Steel FE-PM1505 (X1CrNiMoAlTi12-9-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Forgings - a or D ≤ 150 mm - Rm ≥ 1 200 MPa

This standard specifies the requirements relating to:
Steel FE-PM1505 (X1CrNiMoAlTi12-9-2)
Vacuum induction melted and consumable electrode remelted
Solution treated and precipitation treated
Forgings
a or D ≤ 150 mm
Rm ≥ 1 200 MPa
for aerospace applications.

Luft- und Raumfahrt - Stahl FE-PM1505 (X1CrNiMoAlTi12-9-2) - Vakuuminduktionserschmolzen und mit selbstverzehrender Elektrode umgeschmolzen - Lösungsgeglüht und ausgehägert - Schmiedestücke - a oder D ≤ 150 mm - Rm ≥ 1 200 MPa

Diese Norm legt die Anforderungen an
Stahl FE PM1505 (X1CrNiMoAlTi12-9-2)
Vakuuminduktionserschmolzen und mit selbstverzehrender Elektrode umgeschmolzen
Lösungsgeglüht und ausgehärtet
Schmiedestücke
a oder D  150 mm
Rm ≥ 1 200 MPa
für Anwendungen in der Luft- und Raumfahrt fest.

Série aérospatiale - Acier FE-PM1505 (X1CrNiMoAlTi12-9-2) - Élaboré sous vide par induction et refondu à l'électrode consommable - Mis en solution et vieilli - Pièces forgées et pièces matricées - a ou D ≤ 150 mm - Rm ≥ 1 200 MPa

Aeronavtika - Jeklo FE-PM1505 (X1CrNiMoAlTi12-9-2) - Izkovki a ali D ≤ 150 mm - Rm ≥ 1200 MPa, taljeni z vakuumsko indukcijo in pretaljeni s talilno elektrodo, žarjeni v topilu in utrjeni

General Information

• Status: Published
• Publication Date: 10-Jul-2007
• Withdrawal Date: 30-Jan-2008
• ICS: 49.025.10 - Steels
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 4 - Metallic
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Completion Date: 30-Jun-2017
• Ref Project: SIST EN 4470:2009 - Aerospace series - Steel FE-PM1505 (X1CrNiMoAlTi12-9-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Forgings - a or D ≤ 150 mm - Rm ≥ 1 200 MPa

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.03D49.025.10JeklaSteelsICS:Ta slovenski standard je istoveten z:EN 4470:2007SIST EN 4470:2009en,de01-maj-2009SIST EN 4470:2009SLOVENSKI
STANDARD



SIST EN 4470:2009



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 4470
July 2007 ICS 49.025.10 English Version
Aerospace series - Steel FE-PM1505 (X1CrNiMoAlTi12-9-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Forgings - a or D ≤ 150 mm - Rm ≥ 1 200 MPa
Série aérospatiale - Acier FE-PM1505 (X1CrNiMoAlTi12-9-2) - Élaboré sous vide par induction et refondu à l'électrode consommable - Mis en solution et vieilli - Pièces forgées et pièces matricées - a ou D ≤ 150 mm - Rm ≥ 1 200 MPa
Luft- und Raumfahrt - Stahl FE-PM1505 (X1CrNiMoAlTi12-9-2) - Vakuuminduktionserschmolzen und mit selbstverzehrender Elektrode umgeschmolzen - Lösungsgeglüht und ausgelagert - Schmiedestücke - a oder D ≤ 150 mm - Rm ≥ 1 200 MPa This European Standard was approved by CEN on 15 February 2007.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36
B-1050 Brussels © 2007 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 4470:2007: ESIST EN 4470:2009



EN 4470:2007 (E) 2 Foreword This document (EN 4470:2007) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by January 2008, and conflicting national standards shall be withdrawn at the latest by January 2008. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.
SIST EN 4470:2009



EN 4470:2007 (E) 3 Introduction This standard is part of the series of EN metallic material standards for aerospace applications. The general organization of this series is described in EN 4258. This standard has been prepared in accordance with EN 4500-5. 1 Scope This standard specifies the requirements relating to: Steel FE-PM1505 (X1CrNiMoAlTi12-9-2) Vacuum induction melted and consumable electrode remelted Solution treated and precipitation treated Forgings a or D ≤ 150 mm Rm ≥ 1 200 MPa for aerospace applications. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 4258, Aerospace series — Metallic materials — General organization of standardization — Links between types of EN standards and their use. EN 4346, Aerospace series — Steel FE-PM1505 (X1CrNiMoAlTi12-9-2) — Vacuum induction melted and consumable electrode remelted — Softened — Forging stock — a or D ≤ 300 mm. 1) EN 4500-5, Aerospace series — Metallic materials — Rules for drafting and presentation of material standards — Par
...