EN 3869:2004

Aerospace series - Pipe couplings, loose flanges and seals - Seals in fluorocarbon rubber and armature in aluminium alloy

This standard specifies the characteristics of seals for pipe couplings in fluorocarbon rubber and armature in aluminium alloy for aerospace applications.
NOTE : Assembly in accordance with TR 4053

Luft- und Raumfahrt - Rohrverbindungen mit losen Flanschen und Flanschdichtungen - Dichtungen aus Fluorcarbon-Elastomer mit Aluminiumarmierung

Diese Norm legt die Eigenschaften von Dichtungen aus Fluorcarbon-Elastomer mit Armierung aus Aluminiumlegierung für Rohrverbindungen für die Luft- und Raumfahrt fest.
ANMERKUNG   Einbau nach TR 4053.

Série aérospatiale - Raccords, brides amovibles et joints - Joints en élastomère fluorocarbone et armature en alliage d'aluminium

Aerospace series - Pipe couplings, loose flanges and seals - Seals in fluorocarbon rubber and armature in aluminium alloy

General Information

• Status: Published
• Publication Date: 09-Nov-2004
• Withdrawal Date: 30-May-2005
• ICS: 49.080 - Aerospace fluid systems and components
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 3 - Mechanical
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Completion Date: 30-Jun-2017
• Ref Project: SIST EN 3869:2005 - Aerospace series - Pipe couplings, loose flanges and seals - Seals in fluorocarbon rubber and armature in aluminium alloy

Relations

• Replaces: EN 3869:2003 - Aerospace series - Pipe couplings, loose flanges and seals - Seals in fluorocarbon rubber and armature in aluminium alloy
• Effective Date: 22-Dec-2008

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aerospace series - Pipe couplings, loose flanges and seals - Seals in fluorocarbon rubber and armature in aluminium alloyLuft- und Raumfahrt - Rohrverbindungen mit losen Flanschen und Flanschdichtungen - Dichtungen aus Fluorcarbon-Elastomer mit AluminiumarmierungSérie aérospatiale - Raccords, brides amovibles et joints - Joints en élastomere fluorocarbone et armature en alliage d'aluminiumAerospace series - Pipe couplings, loose flanges and seals - Seals in fluorocarbon rubber and armature in aluminium alloy49.080Aerospace fluid systems and components49.025.20AluminijAluminiumICS:Ta slovenski standard je istoveten z:EN 3869:2004SIST EN 3869:2005en01-junij-2005SIST EN 3869:2005SLOVENSKI
STANDARDSIST EN 3869:20041DGRPHãþD



SIST EN 3869:2005



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 3869
November 2004 ICS 49.080
Supersedes EN 3869:2003
English version
Aerospace series - Pipe couplings, loose flanges and seals - Seals in fluorocarbon rubber and armature in aluminium alloy
Série aérospatiale - Raccords, brides amovibles et joints - Joints en élastomère fluorocarbone et armature en alliage d'aluminium
Luft- und Raumfahrt - Rohrverbindungen mit losen Flanschen und Flachdichtungen - Dichtungen aus Fluor-Elastomer mit Aluminiumarmierung This European Standard was approved by CEN on 11 September 2003.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36
B-1050 Brussels © 2004 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 3869:2004: ESIST EN 3869:2005



EN 3869:2004 (E) 2 Contents
Page
Foreword.3 1 Scope.4 2 Normative references.4 3 Required characteristics.4 4 Designation.6 5 Marking.6 6 Technical specification.6 SIST EN 3869:2005



EN 3869:2004 (E) 3 Foreword This document (EN 3869:2004) has been prepared by the European Association of Aerospace Manufacturers - Standardization (AECMA-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of AECMA, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2005, and conflicting national standards shall be withdrawn at the latest by May 2005. This document supersedes EN 3869:2003. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. SIST EN 3
...