EN 649:2011

Resilient floor coverings - Homogenous and heterogenous polyvinyl chloride floor coverings - Specification

This European Standard specifies the characteristics of homogeneous and heterogeneous floor coverings, based on polyvinyl chloride and modifications thereof, supplied in either tile or roll form.
To encourage the consumer to make an informed choice, the standard includes a classification system (see EN 685) based on intensity of use, which shows where these floor coverings should give satisfactory service. It also specifies requirements for marking.

Elastische Bodenbeläge - Homogene und heterogene Polyvinylchlorid-Bodenbeläge - Spezifikation

Diese Europäische Norm legt die Eigenschaften von homogenen und heterogenen Bodenbelägen auf der Basis von Polyvinylchlorid und dessen Modifikationen fest, die sowohl in Form von Platten als auch als Rollen geliefert werden. Um den Verbraucher bei seiner Auswahl zu unterstützen, enthält diese Norm ein Klassifizierungssystem (siehe EN 685) auf Basis der Nutzungsintensität, das zeigt, wo für diese Bodenbeläge ein zufriedenstellender Nutzen möglich wäre. Die Norm legt auch die Anforderungen zur Kennzeichnung fest.

Revêtements de sol résilients - Revêtements de sol homogènes et hétérogènes à base de polychlorure de vinyle - Spécifications

La présente Norme européenne prescrit les caractéristiques des revêtements de sol homogènes et
hétérogènes à base de polychlorure de vinyle et ses modifications sous forme de dalles ou de rouleaux.
Pour aider le consommateur à faire son choix, la présente norme inclut un système de classification (voir
l’EN 685) basé sur l'intensité d'utilisation, indiquant l'endroit où le revêtement de sol rendrait un service
satisfaisant. Elle prescrit également des exigences relatives au marquage.

Netekstilne talne obloge - Homogene in heterogene polivinilkloridne talne obloge - Specifikacija

Ta evropski standard določa značilnosti homogenih in heterogenih polivinilkloridnih talnih oblog, ki temeljijo na polivinilkloridu in njegovih modifikacijah, dostavljenih v obliki plošč ali zvitka.
Da bi ta evropski standard potrošnike spodbujal k sprejemanju utemeljenih odločitev, vsebuje klasifikacijski sistem (glej EN 685), temelječ na intenzivnosti uporabe, ki kaže, kje bi se te talne obloge lahko zadovoljivo uporabljale. Določa tudi zahteve za označevanje.

General Information

• Status: Withdrawn
• Publication Date: 08-Mar-2011
• Withdrawal Date: 22-Oct-2013
• ICS: 97.150 - Floor coverings
• Technical Committee: CEN/TC 134 - Resilient and textile floor coverings
• Drafting Committee: CEN/TC 134/WG 7 - Resilient floor coverings
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 23-Oct-2013
• Completion Date: 23-Oct-2013
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Ref Project: SIST EN 649:2011 - Resilient floor coverings - Homogenous and heterogenous polyvinyl chloride floor coverings - Specification

Relations

• Replaces: EN 649:1996 - Resilient floor coverings - Homogeneous and heterogeneous polyvinyl chloride floor coverings - Specification
• Effective Date: 27-Jun-2009
• Replaces: EN 649:1996/A1:2003 - Resilient floor coverings - Homogeneous and heterogeneous polyvinyl chloride floor coverings - Specification
• Effective Date: 27-Jun-2009
• Replaced By: EN ISO 10581:2013 - Resilient floor coverings - Homogeneous poly(vinyl chloride) floor covering - Specifications (ISO 10581:2011)
• Effective Date: 30-Oct-2013

Standards Content (Sample)

SLOVENSKI STANDARD
01-oktober-2011
1DGRPHãþD
SIST EN 649:1999
SIST EN 649:1999/A1:2004
Netekstilne talne obloge - Homogene in heterogene polivinilkloridne talne obloge -
Specifikacija
Resilient floor coverings - Homogenous and heterogenous polyvinyl chloride floor
coverings - Specification
Elastische Bodenbeläge - Homogene und heterogene Polyvinylchlorid-Bodenbeläge -
Spezifikation
Revêtements de sol résilients - Revêtements de sol homogènes et hétérogènes à base
de polychlorure de vinyle - Spécifications
Ta slovenski standard je istoveten z: EN 649:2011
ICS:
97.150 Netekstilne talne obloge Non-textile floor coverings
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 649
NORME EUROPÉENNE
EUROPÄISCHE NORM
March 2011
ICS 97.150 Supersedes EN 649:1996
English Version
Resilient floor coverings - Homogenous and heterogenous
polyvinyl chloride floor coverings - Specification
Revêtements de sol résilients - Revêtements de sol Elastische Bodenbeläge - Homogene und heterogene
homogènes et hétérogènes à base de polychlorure de Polyvinylchlorid-Bodenbeläge - Spezifikation
vinyle - Spécifications
This European Standard was approved by CEN on 6 February 2011.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2011 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 649:2011: E
worldwide for CEN national Members.

Contents Page
Foreword .3
1 Scope .4
2 Normative references .4
3 Terms and definitions .4
4 Requirements .5
4.1 General requirements .5
4.2 Classification requirements .5
4.2.1 Wear group classification .5
4.2.2 Homogeneous products and wear layers .5
4.2.3 Level of use classification .5
5 Marking .9
Annex A (informative) Optional properties . 10
Annex B (informative) Additional methods of tests . 11
Bibliography . 12

Foreword
This document (EN 649:2011) has been prepared by Technical Committee CEN/TC 134 “Resilient, textile and
laminate floor coverings”, the secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by September 2011, and conflicting national standards shall be
withdrawn at the latest by September 2011.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 649:1996.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
1 Scope
This European Standard specifies the characteristics of homogeneous and heterogeneous floor coverings,
based on polyvinyl chloride and modifications thereof, supplied in either tile or roll form.
To encourage the consumer to make an informed choice, the standard includes a classification system (see
EN 685) based on intensity of use, which shows where these floor coverings should give satisfactory service.
It also specifies requirements for marking.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
EN 425, Resilient and laminate floor coverings — Castor chair test
EN 426, Resilient floor coverings — Determination of width, length, straightness and flatness of sheet material
EN 427, Resilient floor coverings — Determination of the side length, squareness and straightness of tiles
EN 428, Resilient floor coverings — Determination of overall thickness
EN 429, Resilient floor coverings — Determination of the thickness of layers
EN 430, Resilient floor coverings — Determination of mass per unit area
EN 433, Resilient floor coverings — Determination of residual indentation after static loading
EN 434, Resilient floor coverings — Determination of dimensional stability and curling after exposure to heat
EN 435, Resilient floor coverings — Determination of flexibility
EN 660-2, Resilient floor coverings — Determination of wear resistance — Part 2: Frick-Taber test
EN 685, Resilient, textile and laminate floor coverings — Classification
EN ISO 105-B02, Textiles — Tests for colour fastness — Part B02: Colour fastness to artificial light: Xenon
arc fading lamp test (ISO 105-B02:1994, including amendment 1:1998)
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
3.1
homogeneous floor covering
floor covering with one or more layers of the same composition and colour, patterned throughout its thickness
3.2
heterogeneous floor covering
floor covering consisting of a wear layer and other compact layers which differ in composition and/or d
...