EN 3733-108:2008
(Main)Aerospace series - Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150 °C continuous - Part 108: Cable support boot - Product standard
Aerospace series - Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150 °C continuous - Part 108: Cable support boot - Product standard
This standard specifies the characteristics of cable support boots for single channel fibre optic plug and receptacle connectors for aerospace series single core optical cable in accordance with EN 4532, operating temperature up to 150 °C.
Connector interface dimensions, table of tests and qualification approval requirements are contained in the Technical Specification EN 3733-001. EN 3733-002, List of product standards, includes the listings of product types, codification and applicable combinations of product types.
Luft- und Raumfahrt - Optischer Rundsteckverbinder, einpolig, selbstsichernde Schraubkupplung, Betriebstemperatur 150 °C konstant - Teil 108: Kabeltülle - Produktnorm
Diese Norm legt die Eigenschaften von Kabeltüllen für einpolige freie und feste LWL-Steckverbinder für
einadrige optische Kabel nach EN 4532 zur Anwendung in der Luft- und Raumfahrt, Betriebstemperatur bis
150 °C, fest.
Die Maße des Steckgesichts, eine Tabelle mit Prüfungen sowie Anforderungen für die Bauartzulassung sind
in den Technischen Lieferbedingungen EN 3733-001 enthalten. EN 3733-002, Übersicht über die Produktnormen,
enthält ein Verzeichnis der Bauarten, ihre Kodierung und zulässige Bauteilekombinationen.
Série aérospatiale - Connecteur optique circulaire monovoie, à accouplement par bague filetée, température d'utilisation 150 °C continu - Partie 108 : Manchon de protection - Norme de produit
Aeronavtika - Konektor, optični, okrogli, enokanalni, priključen s samozaklepnim obročkom, stalna delovna temperatura do 150 °C - 108. del: Obojka za kabel - Standard za proizvod
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aerospace series - Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150 °C continuous - Part 108: Cable support boot - Product standardSérie aérospatiale - Connecteur optique circulaire monovoie, à accouplement par bague filetée, température d'utilisation 150 °C continu - Partie 108 : Manchon de protection - Norme de produitLuft- und Raumfahrt - Optischer Rundsteckverbinder einpolig Schraubkupplung, Betriebstemperatur 150 °C konstant - Teil 108: Kabelzugentlastung - Produktnorm49.060Aerospace electric equipment and systemsICS:SIST EN 3733-108:2008enTa slovenski standard je istoveten z:EN 3733-108:200801-julij-2008SIST EN 3733-108:2008SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 3733-108
April 2008 ICS 49.060 English Version
Aerospace series - Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150 °C continuous - Part 108: Cable support boot - Product standard
Série aérospatiale - Connecteur optique circulaire monovoie, à accouplement par bague filetée, température d'utilisation 150 °C continu - Partie 108 : Manchon de protection - Norme de produit
Luft- und Raumfahrt - Optischer Rundsteckverbinder einpolig Schraubkupplung, Betriebstemperatur 150 °C konstant - Teil 108: Kabelzugentlastung - Produktnorm This European Standard was approved by CEN on 19 January 2008.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36
B-1050 Brussels © 2008 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 3733-108:2008: E
EN 3733-108:2008 (E) 2 Contents Page Foreword.3 1 Scope.4 2 Normative references.4 3 Terms and definitions.4 4 Required characteristics.5 5 Designation.6 6 Marking.6 7 Technical specification.6
EN 3733-108:2008 (E) 3 Foreword This document (EN 3733-108:2008) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by October 2008, and conflicting national standards shall be withdrawn at the latest by October 2008. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. According
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.