EN 16602-70-45:2014

Space product assurance - Mechanical testing of metallic materials

This Standard specifies requirements for mechanical testing of metallic materials to be used in the fabrication of spacecraft hardware.
This Standard establishes the requirements for most relevant test methods carried out to assess the tensile, fatigue and fracture
properties of metallic materials. It does not give a complete review of all the existing test methods for the evaluation of mechanical
properties of metallic materials.
Furthermore, this Standard specifies requirements for the evaluation, presentation and reporting of test results.
This standard may be tailored for the specific characteristic and constrains of a space project in conformance with ECSS-S-ST-00.

Raumfahrtproduktsicherung - Mechanische Tests von metallenem Material

Assurance produit des projets spatiaux - Essais mécaniques des matériaux métalliques

Zagotavljanje varnih proizvodov v vesoljski tehniki - Mehansko preskušanje kovinskih materialov

Ta standard določa zahteve za mehansko preskušanje kovinskih materialov, ki se uporabljajo pri izdelovanju vesoljske strojne opreme.  Ta standard določa zahteve za najustreznejše preskusne metode, ki se izvajajo za oceno nateznih lastnosti, lastnosti utrujenosti in pokanja kovinskih materialov. Ne podaja popolnega pregleda vseh obstoječih preskusnih metod za oceno mehanskih lastnosti kovinskih materialov.  Poleg tega ta standard določa zahteve za oceno, predstavitev in sporočanje rezultatov preskusa. Ta standard se lahko prilagodi posameznim lastnostim in omejitvam vesoljskega projekta v skladu s standardom ECSS-S-ST-00.

General Information

• Status: Published
• Publication Date: 28-Oct-2014
• Withdrawal Date: 29-Apr-2015
• ICS: 49.025.01 - Materials for aerospace construction in general
• ICS: 49.140 - Space systems and operations
• Technical Committee: CEN/CLC/TC 5 - Space
• Drafting Committee: CEN/CLC/TC 5 - Space
• Current Stage: 9060 - Closure of 2 Year Review Enquiry - Review Enquiry
• Start Date: 03-Jun-2020
• Completion Date: 03-Jun-2020
• Mandate: M/496 - Mandate addressed to CEN, CENELEC and ETSI to develop standardisation regarding space industry (Phase 3 of the process)
• Ref Project: SIST EN 16602-70-45:2015 - Space product assurance - Mechanical testing of metallic materials

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 16602-70-45:2015
01-januar-2015
Zagotavljanje varnih proizvodov v vesoljski tehniki - Mehansko preskušanje
kovinskih materialov
Space product assurance - Mechanical testing of metallic materials
Raumfahrtproduktsicherung - Mechanische Tests von metallenem Material
Assurance produit des projets spatiaux - Essais mécaniques des matériaux métalliques
Ta slovenski standard je istoveten z: EN 16602-70-45:2014
ICS:
49.025.01 Materiali za letalsko in Materials for aerospace
vesoljsko gradnjo na splošno construction in general
49.140 Vesoljski sistemi in operacije Space systems and
operations
77.040.10 Mehansko preskušanje kovin Mechanical testing of metals
SIST EN 16602-70-45:2015 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 16602-70-45:2015

---------------------- Page: 2 ----------------------

SIST EN 16602-70-45:2015


EUROPEAN STANDARD
EN 16602-70-45

NORME EUROPÉENNE

EUROPÄISCHE NORM
October 2014
ICS 49.025.01; 49.140

English version
Space product assurance - Mechanical testing of metallic
materials
Assurance produit des projets spatiaux - Essais Raumfahrtproduktsicherung - Mechanische Tests von
mécaniques des matériaux métalliques metallenem Material
This European Standard was approved by CEN on 18 October 2014.

CEN and CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving
this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning
such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN and CENELEC
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN and CENELEC member into its own language and notified to the CEN-CENELEC Management Centre
has the same status as the official versions.

CEN and CENELEC members are the national standards bodies and national electrotechnical committees of Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia,
Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.






CEN-CENELEC Management Centre:
Avenue Marnix 17, B-1000 Brussels
© 2014 CEN/CENELEC All rights of exploitation in any form and by any means reserved Ref. No. EN 16602-70-45:2014 E
worldwide for CEN national Members and for CENELEC
Members.

---------------------- Page: 3 ----------------------

SIST EN 16602-70-45:2015
EN 16602-70-45:2014 (E)
Table of contents
Foreword . 5
1 Scope . 6
2 Normative references . 7
3 Terms, definitions and abbreviated terms . 9
3.1 Terms defined in other standards . 9
3.2 Terms specific to the present standard . 9
3.3 Abbreviated terms. 10
3.4 Symbols . 11
4 Principles . 12
4.1 Overview . 12
4.2 Tensile test . 12
4.3 Fracture toughness test . 12
4.3.1 Overview . 12
4.3.2 Determination of fracture toughness using the K test method . 12
Ic
4.3.3 Determination of fracture toughness using the J test method . 13
Ic
4.3.4 Characterization of fracture toughness using the R-curve test method . 13
4.3.5 Characterization of fracture toughness using the CTOD test method . 13
4.4 Fatigue test .
...