iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 26591-1:1992

(Main)

Packaging - Sacks - Description and method of measurement - Part 1: Empty paper sacks (ISO 6591-1:1984)

Packaging - Sacks - Description and method of measurement - Part 1: Empty paper sacks (ISO 6591-1:1984)

Description and dimensional designation of paper sacks are given by ten figures. Equipment, sampling, procedure and test report for the method of measurement are specified.

Packmittel - Säcke - Beschreibung der Maße und des Meßverfahrens - Teil 1: Leere Papiersäcke (ISO 6591-1:1984)

Diese Norm legt die Beschreibung und Bestimmung der Masse leerer Papiersäcke fest und definiert das Verfahren zur Bestimmung dieser Masse. Es ist vorzugsweise zur Anwendung bei Papiersäcken nach ISO 6590-1.

Emballages - Sacs - Description et méthode de mesurage - Partie 1: Sacs vides en papier (ISO 6591-1:1984)

La présente partie de l'ISO 6591 établit la description ainsi que la désignation dimensionnelle des sacs vides en papier et spécifie une méthode de mesurage des dimensions de ces sacs. Elle est destinée en premier lieu aux sacs en papier tels que spécifiés dans l'ISO 6590/1.

Embalaža - Vreče - Opis in metode merjenja - 1. del: Prazne papirnate vreče (ISO 6591-1:1984)

General Information

Status
Published
Publication Date
19-Nov-1992
ICS
55.080 - Sacks. Bags
Technical Committee
CEN/TC 261 - Packaging
Drafting Committee
CEN/TC 261 - Packaging
Current Stage
9093 - Decision to confirm - Review Enquiry
Start Date
09-May-2007
Completion Date
09-May-2007
Directive
80/232/EEC - Ranges of nominal quantities and nominal capacities permitted for certain pre-packaged products
87/356/EEC - Ranges of nominal quantities and nominal capacities permitted for certain pre-packged products (Dir. 80/232/EEC amendment)
Ref Project
SIST EN 26591-1:1998 - Packaging - Sacks - Description and method of measurement - Part 1: Empty paper sacks (ISO 6591-1:1984)

Buy Standard

EN 26591-1:1998EN 26591-1:1998
PreviousNext
Standard
EN 26591-1:1998
English language
7 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Packmittel - Säcke - Beschreibung der Maße und des Meßverfahrens - Teil 1: Leere Papiersäcke (ISO 6591-1:1984)Emballages - Sacs - Description et méthode de mesurage - Partie 1: Sacs vides en papier (ISO 6591-1:1984)Packaging - Sacks - Description and method of measurement -
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 17427:2022(Main)
Packaging - Requirements and test scheme for carrier bags suitable for treatment in well-managed home composting installations
SIST EN 17427:2022

This document specifies a testing scheme and requirements for the designation of carrier bags of any materials that are considered to be suitable for incorporation into well-managed home composting installations for non-commercial purposes with a home composting cycle of normally at least 12 months. Carrier bags are considered as home compostable in a well-managed system only if all the individual components meet the requirements.
The following four aspects are addressed:
a )characterization;
b) biodegradation in well managed home composting;
c) disintegration in well managed home composting; and
d) home compost quality.
The four aspects, a) to d), are assessing the effects on the biological treatment process and the compost made by it.
This document forms the basis for the labelling of carrier bags that are considered to be suitable for the incorporation into well-managed home composting installations.
NOTE 1 Compliance with the requirements of this document by the carrier bags entering the compost does not necessarily imply that a high-quality compost will be produced.
This document covers the suitability of carrier bags for the incorporation into well managed home composting installations but does not address regulations that may exist regarding the suitability of anything disposed together with the carrier bag to home composting.
This document provides a set of guidance on the parameters, boundaries and processes required to engage in well managed, aerobic, home composting. Alternative composting methods and systems may not provide the conditions necessary for the successful home composting of carrier bags which comply with the requirements of this document.
NOTE 2 Additional general information about home composting is provided in Annex F.
The testing scheme and the requirements specified by this document do not apply to worm composting, industrial composting nor community composting. It also does not provide information on the biodegradability of carrier bags ending up in the environment as litter.
This document includes a reference to features of well-managed home composting (Annex E).
The compost produced via home composting by a private individual is for private use only and not for provision to others, free of charge or in return for payment. Therefore, this document has no value as a marketing authorization or authorization of use of the final compost.
NOTE 3 The testing scheme and evaluation criteria could be the basis for the establishment of suitability to home composting of other products.
NOTE 4 The purpose of testing activity b) is to demonstrate the potential for ultimate biodegradation of the test material when exposed to microbes active under mesophilic conditions (between 15 °C and 45 °C).
NOTE 5 The purpose of testing activity c) is to verify the thickness and/or grammage that allows a full disintegration of the test product in a period consistent with a home composting cycle, under defined environmental conditions. To allow for the potential for variations of local climatic conditions and consumer application of well-managed home composting techniques, lower than optimal temperature profile has been adopted for this test.

  • Standard
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13592:2017(Main)
Plastics sacks for household waste collection - Types, requirements and test methods
SIST EN 13592:2017

This European Standard specifies the general characteristics, test methods and requirements for sacks, bags and bin liners, made from plastic films, used for household waste collection, or household selective waste collection including collection of biodegradable waste for organic recycling (biodegradation and composting).
For the purpose of this European Standard biodegradable and compostable sacks, including ties if any, are those which comply with EN 13432.
This European standard applies only to sacks, bags and bin liners for which the first use is for household waste collection, or household selective waste collection.
NOTE   For editorial reasons, in this document the terms "sack" and "bag" are synonymous.

  • Standard
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14867:2005(Main)
Packaging - Plastic freezer bags - Specifications and test methods
SIST EN 14867:2005

This European Standard specifies the dimensional characteristics, mechanical requirements and requirements of fitness for purpose of plastics freezer bags used for freezing foodstuffs.
It specifies also test methods to check these requirements.
It is applicable to plastic bags reserved for household uses to freeze foodstuffs, including the following types:
   bags with tie closure, without gusset;
   bags with tie closure and lateral gussets;
   bags with re-closable features (or with zipper) without gusset.
NOTE 1   The above list of types of bags is neither restrictive nor exhaustive.
NOTE 2   The application of this European Standard does not exempt the supplier or purchaser from complying with national regulations.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 15119:2004(Main)
Packaging - Sacks - Determination of the friction of filled sacks (ISO 15119:2000)
SIST EN ISO 15119:2005

This International Standard specifies three methods for the determination of the friction of filled sacks.

  • Standard
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13590:2003(Main)
Packaging - Flexible carrier bags for the transport of various retail goods - General characteristics and test methods for the determination of volume and carrying capacity
SIST EN 13590:2003

This European Standard specifies the general characteristics, type test performance and certification requirements for flexible carrier bags used for the transport of various not specified retail goods. For specified retail goods there shall be an agreement between buyer and supplier about the application of this standard.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13593:2003(Main)
Packaging - Paper sacks for household waste collection - Types, requirements and test methods
SIST EN 13593:2003

This European Standard specifies the general characteristics, types, test performance and certification requirements for sacks or liners made from paper, used for household waste collection.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 11897:2001(Main)
Packaging - Sacks made from thermoplastic flexible film - Tear propagation on edge folds (ISO 11897:1999)
SIST EN ISO 11897:2002
  • Standard
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 8367-1:1996(Main)
Packaging - Dimensional tolerances for general purpose sacks - Part 1: Paper sacks (ISO 8367-1:1993)
SIST EN ISO 8367-1:1997

The tolerances of the following dimensions of paper sacks as defined in ISO 6590-1 are specified: ply grammage, length of sack, width of sack, width of gusset, circumference of sack with gussets, width of bottom, width of valve, position of the leading edge of the valve sleeve, print position on sack.

  • Standard
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 8351-1:1996(Main)
Packaging - Method of specification for sacks - Part 1: Paper sacks (ISO 8351-1:1994)
SIST EN ISO 8351-1:1997

Provides a checklist for the characteristics of paper sacks to be specified when ordering. These ordering specifications cover the decription of the sack and do not deal with quantitative performance requirements. Is primarily intended for application to the types of paper sacks as specified in ISO 6590-2.

  • Standard
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 8367-2:1996(Main)
Packaging - Dimensional tolerances for general purpose sacks - Part 2: Sacks made from thermoplastic flexible film (ISO 8367-2:1993)
SIST EN ISO 8367-2:1998

The tolerances of the following dimensions of sacks made from thermoplastic flexible film as defined in ISO 6590-2 are specified: thickness of plies, length of sack, width of sack, width of gusset, circumference of sack with gussets, width of bottom, width of valve, position of the leading edge of the valve sleeve, length of the valve sleeve, print position on sack.

  • Standard
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day