EN 3719:2005

Aerospace series - Aluminium or aluminium alloy conductors for electrical cables - Product standard

This standard specifies the dimensions, linear resistance, mechanical characteristics, construction and mass of conductors in aluminium or aluminium alloy for electrical cables for aerospace applications.
It applies to stranded conductors with nominal cross-sections of 5 mm2 to 107 mm2 inclusive.

Luft- und Raumfahrt - Leiter aus Aluminium oder Aluminiumlegierung in elektrische Leitungen - Produktnorm

Diese Norm legt die Maße, den ohmschen Widerstand, die mechanischen Eigenschaften, den Aufbau und die Masse von Leitern aus Aluminium oder Aluminiumlegierung für elektrische Leitungen für Anwendungen in der Luft  und Raumfahrt fest.
Sie gilt für verseilte Leiter mit Nennquerschnitten von 5 mm2 bis 107 mm2.

Série aérospatiale - Conducteurs en aluminium ou en alliage d'aluminium pour câbles électriques - Norme de produit

Aeronavtika – Vodniki za električne kable iz aluminija in aluminijevih zlitin – Standard za proizvod

General Information

• Status: Withdrawn
• Publication Date: 25-Oct-2005
• Withdrawal Date: 13-Jul-2010
• ICS: 49.025.20 - Aluminium
• Technical Committee: ASD/ELEC - Electrical
• Drafting Committee: ASD/ELEC - Electrical
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 14-Jul-2010
• Completion Date: 14-Jul-2010
• Ref Project: SIST EN 3719:2006 - Aerospace series - Aluminium or aluminium alloy conductors for electrical cables - Product standard

Relations

• Replaced By: EN 3719:2010 - Aerospace series - Aluminium or aluminium alloy conductors for electrical cables - Product standard
• Effective Date: 08-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
01-julij-2006
$HURQDYWLND±9RGQLNL]DHOHNWULþQHNDEOHL]DOXPLQLMDLQDOXPLQLMHYLK]OLWLQ±
6WDQGDUG]DSURL]YRG
Aerospace series - Aluminium or aluminium alloy conductors for electrical cables -
Product standard
Luft- und Raumfahrt - Leiter aus Aluminium oder Aluminiumlegierung in elektrische
Leitungen - Produktnorm
Série aérospatiale - Conducteurs en aluminium ou en alliage d'aluminium pour câbles
électriques - Norme de produit
Ta slovenski standard je istoveten z: EN 3719:2005
ICS:
49.025.20
49.060
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 3719
NORME EUROPÉENNE
EUROPÄISCHE NORM
October 2005
ICS 49.025.20
English Version
Aerospace series - Aluminium or aluminium alloy conductors for
electrical cables - Product standard
Série aérospatiale - Conducteurs en aluminium ou en Luft- und Raumfahrt - Leiter aus Aluminium oder
alliage d'aluminium pour câbles électriques - Norme de Aluminiumlegierung in elektrische Leitungen - Produktnorm
produit
This European Standard was approved by CEN on 19 September 2005.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2005 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 3719:2005: E
worldwide for CEN national Members.

Contents Page
Foreword .3
1 Scope.4
2 Normative references.4
3 Terms, definitions and symbols .4
4 Conductor materials and construction .4
5 Required characteristics.6
6 Test methods.6
7 Designation.7
8 Marking, packaging and delivery lengths .7

Foreword
This European Standard (EN 3719:2005) has been prepared by the European Association of Aerospace
Manufacturers - Standardization (AECMA-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this Standard has
received the approval of the National Associations and the Official Services of the member countries of
AECMA, prior to its presentation to CEN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by April 2006, and conflicting national standards shall be withdrawn at the
latest by April 2006.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland
and the United Kingdom.
1 Scope
This standard specifies the dimensions, linear resistance, mechanical characteristics, construction and mass
of conduct
...