EN ISO 24265:2020

Footwear - Test methods for uppers - Resistance to rubbing using a rubber strip (ISO 24265:2020)

This document specifies a method for the determination of the rubbing resistance of leather and synthetic materials using rubber.
The method aims to establish testing conditions that are similar to those of the practical use of footwear subjected to drastic stress, as is the case of hiking or children's footwear, where the upper of one of the shoes is expected to rub with the sole of the other.
This method is applicable to all types of leather and synthetic materials intended for shoe uppers.

Schuhe - Prüfverfahren für Oberteile - Prüfung der Reibfestigkeit mit einem Gummikissen (ISO 24265:2020)

Dieses Dokument legt ein Verfahren zur Bestimmung der Reibfestigkeit von Leder und synthetischen Materialien mit einem Gummi fest.
Das Verfahren zielt darauf ab, Prüfbedingungen zu schaffen, die denen ähneln, die in der Praxis bei Schuhen auftreten, die hohen Belastungen ausgesetzt sind, wie bei Wanderschuhen und Kinderschuhen, wo davon ausgegangen wird, dass das Obermaterial des einen Schuhs an der Sohle des anderen Schuhs reibt.
Dieses Verfahren gilt für alle Arten von Leder und synthetischen Materialien, die als Schuhobermaterialien dienen sollen.

Chaussures - Méthodes d'essai pour les tiges - Résistance au frottement à l'aide d'une bande en caoutchouc (ISO 24265:2020)

Le présent document spécifie une méthode pour la détermination de la résistance au frottement du cuir et des matériaux synthétiques à l'aide de caoutchouc.
Cette méthode a pour but d'établir des conditions d'essai similaires aux conditions d'utilisation pratique d'une chaussure soumise à une contrainte intense, comme c'est le cas des chaussures de randonnée ou des chaussures d'enfants, lorsque le frottement de la tige de l'une des chaussures avec la semelle de l'autre chaussure est prévisible.
Cette méthode s'applique à tous les types de cuir et de matériaux synthétiques destinés à la fabrication de tiges de chaussures.

Obutev - Metode za preskušanje zgornjih delov - Odpornost proti drgnjenju z gumijastim trakom (ISO 24265:2020)

General Information

• Status: Published
• Publication Date: 27-Oct-2020
• Withdrawal Date: 29-Apr-2021
• ICS: 61.060 - Footwear
• Technical Committee: CEN/TC 309 - Footwear
• Drafting Committee: CEN/TC 309/WG 1 - Minimum performance requirements and test methods for components for footwear
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 28-Oct-2020
• Completion Date: 28-Oct-2020
• Ref Project: SIST EN ISO 24265:2021 - Footwear - Test methods for uppers - Resistance to rubbing using a rubber strip (ISO 24265:2020)

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 24265:2021
01-januar-2021
Obutev - Metode za preskušanje zgornjih delov - Odpornost proti drgnjenju z
gumijastim trakom (ISO 24265:2020)
Footwear - Test methods for uppers - Resistance to rubbing using a rubber strip (ISO
24265:2020)
Schuhe - Prüfverfahren für Oberteile - Prüfung der Reibfestigkeit mit einem
Gummikissen (ISO 24265:2020)
Chaussures - Méthodes d'essai pour les tiges - Résistance au frottement à l'aide d'une
bande en caoutchouc (ISO 24265:2020)
Ta slovenski standard je istoveten z: EN ISO 24265:2020
ICS:
61.060 Obuvala Footwear
SIST EN ISO 24265:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 24265:2021

---------------------- Page: 2 ----------------------
SIST EN ISO 24265:2021


EN ISO 24265
EUROPEAN STANDARD

NORME EUROPÉENNE

October 2020
EUROPÄISCHE NORM
ICS 61.060
English Version

Footwear - Test methods for uppers - Resistance to
rubbing using a rubber strip (ISO 24265:2020)
Chaussures - Méthodes d'essai pour les tiges - Schuhe - Prüfverfahren für Oberteile - Prüfung der
Résistance au frottement à l'aide d'une bande en Reibfestigkeit mit einem Gummikissen (ISO
caoutchouc (ISO 24265:2020) 24265:2020)
This European Standard was approved by CEN on 14 September 2020.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 24265:2020 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN ISO 24265:2021
EN ISO 24265:2020 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------
SIST EN ISO 24265:2021
EN ISO 24265:2020 (E)
European foreword
This document (EN ISO 24265:2020) has been prepared by Technical Committee ISO/TC 216
"Footwear" in collaboration with Technical Committee CEN/TC 309 “Footwear” the secretariat of which
is held by UNE.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by April 2021, and conflicting national standards shall be
withdrawn at the latest by April 2021.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 24265:2020 has been approved by CEN as EN ISO 24265:2020 without any modification.

3

---------------------- Page: 5 ----------------------
SIST EN ISO 24265:2021

---------------------- Page: 6 ----------------------
SIST EN ISO 24265:2021
INTERNATIONAL ISO
STANDARD 24265
First edition
2020-10
Footwear — Test methods for uppers
— Resistance to rubbing using a
rubber strip
Chaussures — Méthodes d'essai pour les tiges — Résistance au
frottement à l'aide d'une bande en caoutchouc
Reference number
ISO 24265:2020(E)
©
ISO 2020

---
...