Aerospace series - Test method for metallic materials - Ultrasonic inspection of bars, plates, forging stock and forgings - Part 4: Acceptance criteria

This European Standard specifies the acceptance criteria for products ultrasonically inspected in accordance with EN 4050 1.

Luft- und Raumfahrt - Prüfverfahren für metallische Werkstoffe - Ultraschallprüfung von Stangen, Platten, Schmiedevormaterial und Schmiedestücken - Teil 4: Abnahmekriterien

Diese Europäische Norm definiert Grundbegriffe, z. B. Langzeitarchivierung und Speicherung und legt den Kontext und Anwendungsbereich von EN 9300 fest. Im Abschnitt Grundlagen werden die Grundbegriffe und Herangehensweisen von EN 9300 sowie verwandter Normen beschrieben, auf die verwiesen wird.

Série aérospatiale - Méthode d'essai applicable aux matériaux métalliques - L'inspection par ultrasons des barres, des plaques, des stocks de forgeage et de pièces forgées - Partie 4: Critères d'acceptation

Aeronavtika - Metode za preskušanje kovinskih materialov - Ultrazvočno preskušanje palic, plošč, kovnih materialov in izkovkov - 4. del: Merila sprejemljivosti

General Information

Status
Published
Publication Date
25-Sep-2012
Technical Committee
Drafting Committee
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Due Date
26-Sep-2012
Completion Date
26-Sep-2012

Buy Standard

Standard
EN 4050-4:2014
English language
5 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.YRþQRVSUHMHPOMLYRVWLLuft- und Raumfahrt - Prüfverfahren für metallische Werkstoffe - Ultraschallprüfung von Stangen, Platten, Schmiedevormaterial und Schmiedestücken - Teil 4: AbnahmekriterienSérie aérospatiale - Méthode d'essai applicable aux matériaux métalliques - L'inspection par ultrasons des barres, des plaques, des stocks de forgeage et de pièces forgées - Partie 4: Critères d'acceptationAerospace series - Test method for metallic materials - Ultrasonic inspection of bars, plates, forging stock and forgings - Part 4: Acceptance criteria49.035Sestavni deli za letalsko in vesoljsko gradnjoComponents for aerospace construction49.025.01Materiali za letalsko in vesoljsko gradnjo na splošnoMaterials for aerospace construction in generalICS:Ta slovenski standard je istoveten z:EN 4050-4:2012SIST EN 4050-4:2014en01-marec-2014SIST EN 4050-4:2014SLOVENSKI

STANDARD
SIST EN 4050-4:2014
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 4050-4
September 2012 ICS 49.025.05; 49.025.15 English Version

Aerospace series - Test method for metallic materials - Ultrasonic inspection of bars, plates, forging stock and forgings -Part 4: Acceptance criteria

Série aérospatiale - Méthode d'essai applicable aux matériaux métalliques - L'inspection par ultrasons des barres, des assiettes, des stocks de forgeage et de pièces forgées - Partie 4: Critères d'acceptation

Luft- und Raumfahrt - Prüfverfahren für metallische Werkstoffe - Ultraschallprüfung von Stangen, Platten, Schmiedevormaterial und Schmiedestücken - Teil 4: Abnahmekriterien This European Standard was approved by CEN on 15 July 2011.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,

B-1000 Brussels © 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 4050-4:2012: ESIST EN 4050-4:2014

EN 4050-4:2012 (E) 2 Contents Page Foreword ..............................................................................................................................................................31 Scope ......................................................................................................................................................42 Normative references ............................................................................................................................43 Acceptance criteria ................................................................................................................................44 Choice of technique..........

...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.