EN 4050-4:2012

Aerospace series - Test method for metallic materials - Ultrasonic inspection of bars, plates, forging stock and forgings - Part 4: Acceptance criteria

This European Standard specifies the acceptance criteria for products ultrasonically inspected in accordance with EN 4050 1.

Luft- und Raumfahrt - Prüfverfahren für metallische Werkstoffe - Ultraschallprüfung von Stangen, Platten, Schmiedevormaterial und Schmiedestücken - Teil 4: Abnahmekriterien

Diese Europäische Norm definiert Grundbegriffe, z. B. Langzeitarchivierung und Speicherung und legt den Kontext und Anwendungsbereich von EN 9300 fest. Im Abschnitt Grundlagen werden die Grundbegriffe und Herangehensweisen von EN 9300 sowie verwandter Normen beschrieben, auf die verwiesen wird.

Série aérospatiale - Méthode d'essai applicable aux matériaux métalliques - L'inspection par ultrasons des barres, des plaques, des stocks de forgeage et de pièces forgées - Partie 4: Critères d'acceptation

Aeronavtika - Metode za preskušanje kovinskih materialov - Ultrazvočno preskušanje palic, plošč, kovnih materialov in izkovkov - 4. del: Merila sprejemljivosti

General Information

• Status: Published
• Publication Date: 25-Sep-2012
• Withdrawal Date: 30-Mar-2013
• ICS: 49.025.05 - Ferrous alloys in general
• ICS: 49.025.15 - Non-ferrous alloys in general
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 4 - Metallic
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 26-Sep-2012
• Completion Date: 26-Sep-2012
• Ref Project: SIST EN 4050-4:2014 - Aerospace series - Test method for metallic materials - Ultrasonic inspection of bars, plates, forging stock and forgings - Part 4: Acceptance criteria

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.YRþQRVSUHMHPOMLYRVWLLuft- und Raumfahrt - Prüfverfahren für metallische Werkstoffe - Ultraschallprüfung von Stangen, Platten, Schmiedevormaterial und Schmiedestücken - Teil 4: AbnahmekriterienSérie aérospatiale - Méthode d'essai applicable aux matériaux métalliques - L'inspection par ultrasons des barres, des plaques, des stocks de forgeage et de pièces forgées - Partie 4: Critères d'acceptationAerospace series - Test method for metallic materials - Ultrasonic inspection of bars, plates, forging stock and forgings - Part 4: Acceptance criteria49.035Sestavni deli za letalsko in vesoljsko gradnjoComponents for aerospace construction49.025.01Materiali za letalsko in vesoljsko gradnjo na splošnoMaterials for aerospace construction in generalICS:Ta slovenski standard je istoveten z:EN 4050-4:2012SIST EN 4050-4:2014en01-marec-2014SIST EN 4050-4:2014SLOVENSKI
STANDARD



SIST EN 4050-4:2014



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 4050-4
September 2012 ICS 49.025.05; 49.025.15 English Version
Aerospace series - Test method for metallic materials - Ultrasonic inspection of bars, plates, forging stock and forgings -Part 4: Acceptance criteria
Série aérospatiale - Méthode d'essai applicable aux matériaux métalliques - L'inspection par ultrasons des barres, des assiettes, des stocks de forgeage et de pièces forgées - Partie 4: Critères d'acceptation
Luft- und Raumfahrt - Prüfverfahren für metallische Werkstoffe - Ultraschallprüfung von Stangen, Platten, Schmiedevormaterial und Schmiedestücken - Teil 4: Abnahmekriterien This European Standard was approved by CEN on 15 July 2011.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 4050-4:2012: ESIST EN 4050-4:2014



EN 4050-4:2012 (E) 2 Contents Page Foreword .31 Scope .42 Normative references .43 Acceptance criteria .44 Choice of technique.5 SIST EN 4050-4:2014



EN 4050-4:2012 (E) 3 Foreword This document (EN 4050-4:2012) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by March 2013, and conflicting national standards shall be withdrawn at the latest by March 2013. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulga
...