EN 13163:2008
(Main)Thermal insulation products for buildings - Factory made products of expanded polystyrene (EPS) - Specification
Thermal insulation products for buildings - Factory made products of expanded polystyrene (EPS) - Specification
This European Standard specifies the requirements for factory made products of expanded polystyrene, with or without facings or coatings, which are used for the thermal insulation of buildings. The products are manufactured in the form of boards or rolls or other preformed ware.
This European Standard specifies product characteristics and includes procedures for testing, evaluation of conformity, marking and labelling.
Products covered by this European Standard are also used for sound insulation and in prefabricated thermal insulation systems and composite panels; the performance of systems incorporating these products is not covered.
This European Standard does not specify the required class or level of a given property to be achieved by a product to demonstrate fitness for purpose in a particular application. The classes and levels required for a given application are to be found in regulations or non conflicting standards.
Products with a declared thermal resistance lower than 0,25 m2K/W or a declared thermal conductivity at 10 °C greater than 0,060 W/(m•K) are not covered by this European Standard.
Wärmedämmstoffe für Gebäude - Werkmäßig hergestellte Produkte aus expandiertem Polystyrol (EPS) - Spezifikation
Diese Europäische Norm legt die Anforderungen für werkmäßig hergestellte Produkte aus EPS mit oder ohne
Kaschierung fest, die für die Wärmedämmung von Gebäuden benutzt werden. Die Produkte werden in der
Form von Platten oder Rollen oder anderer vorgeformter Ware hergestellt.
Diese Europäische Norm beschreibt die Stoffeigenschaften und enthält die Prüfverfahren und Festlegungen
für die Konformitätsbewertung, die Kennzeichnung und die Etikettierung.
Die in dieser Europäischen Norm beschriebenen Produkte werden auch für die Schalldämmung und in
vorgefertigten Wärmedämmsystemen und Mehrschicht-Verbundplatten angewendet; die Eigenschaften von
Systemen mit diesen Produkten werden nicht behandelt.
Diese Europäische Norm legt keine Anforderungsniveaus für eine vorgegebene Eigenschaft fest, die ein
Produkt erreichen muss, um für einen bestimmten Anwendungsfall tauglich zu sein. Für bestimmte
Anwendungen benötigte Klassen und Stufen können Regelwerken oder übereinstimmenden Normen
entnommen werden.
Diese Europäische Norm gilt nicht für Produkte, deren Nennwert des Wärmedurchlasswiderstandes niedriger
ist als 0,25 m2 ⋅ K/W oder deren Nennwert der Wärmeleitfähigkeit bei 10 °C Mitteltemperatur größer ist als
0,060 W/(m ⋅ K).
Produits isolants thermiques pour le bâtiment - Produits manufacturés en polystyrène expansé (EPS) - Spécification
La présente Norme européenne spécifie les exigences auxquelles doivent satisfaire les produits manufacturés en polystyrène expansé, avec ou sans parements ou revêtements, utilisés pour l'isolation thermique des bâtiments. Les produits sont fabriqués sous forme de panneaux ou de rouleaux ou toute autre présentation préformée.
La présente norme européenne décrit les caractéristiques du produit et contient les procédures d’essai, d’évaluation de la conformité, de marquage et d’étiquetage.
Les produits relevant du domaine d'application de la présente norme européenne sont également utilisés pour l’isolation acoustique dans des systèmes d'isolation thermique et des panneaux composites préfabriqués ; la performance des systèmes dans lesquels entrent ces produits n'est pas définie.
La présente norme européenne ne spécifie pas, pour une propriété donnée, le niveau exigé que doit atteindre un produit pour démontrer son aptitude à l’emploi dans une application particulière. Les classes et niveaux requis pour une application donnée figurent dans les réglementations ou normes non conflictuelles.
Les produits dont la résistance thermique déclarée à une température de 10 °C est inférieure à 0,25 m2.K/W ou dont la conductivité thermique déclarée à une température de 10°C est supérieure à 0,060 W/(m.K) ne sont pas du domaine d'application de la présente norme européenne.
Toplotnoizolacijski proizvodi za stavbe - Proizvodi iz ekspandiranega polistirena (EPS) - Specifikacija
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Toplotnoizolacijski proizvodi za stavbe - Proizvodi iz ekspandiranega polistirena (EPS) - SpecifikacijaWärmedämmstoffe für Gebäude - Werkmäßig hergestellte Produkte aus expandiertem Polystyrol (EPS) - SpezifikationProduits isolants thermiques pour le bâtiment - Produits manufacturés en polystyrène expansé (EPS) - SpécificationThermal insulation products for buildings - Factory made products of expanded polystyrene (EPS) - Specification91.100.60Thermal and sound insulating materialsICS:Ta slovenski standard je istoveten z:EN 13163:2008SIST EN 13163:2009en,de01-februar-2009SIST EN 13163:2009SLOVENSKI
STANDARDSIST EN 13163:2002/AC:2006SIST EN 13163:20021DGRPHãþD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13163November 2008ICS 91.100.60Supersedes EN 13163:2001
English VersionThermal insulation products for buildings - Factory madeproducts of expanded polystyrene (EPS) - SpecificationProduits isolants thermiques pour le bâtiment - Produitsmanufacturés en polystyrène expansé (EPS) - SpécificationWärmedämmstoffe für Gebäude - Werkmäßig hergestellteProdukte aus expandiertem Polystyrol (EPS) - SpezifikationThis European Standard was approved by CEN on 12 October 2008.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2008 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13163:2008: ESIST EN 13163:2009
Determination of the declared values of thermal resistance and thermal conductivity . 25 A.1 General . 25 A.2 Input data . 25 A.3 Declared values. 25 Annex B (normative)
Factory production control . 27 B.1 Testing frequencies . 27 B.2 Indirect testing . 31 Annex C (normative)
Product classification . 35 Annex D (informative)
Additional properties . 36 D.1 General . 36 D.2 Long-term compressive behaviour . 36 D.3 Shear behaviour . 36 D.4 Water vapour diffusion resistance factor . 37 D.5 Behaviour under cyclic loading . 38 D.6 Test methods . 38 D.7 Additional information . 39 Annex ZA (informative)
Clauses of this European standard addressing the provisions of the EU Construction Products Directive. 40 ZA.1 Scope and relevant characteristics . 40 ZA.2 Procedures for attestation of conformity of factory made expanded polystyrene products . 42 ZA.3 CE Marking and labelling . 46 Bibliography . 48
thermal conductivity, λD . 33 Table C.1 — Classification of EPS products . 35 Table C.2 — Classification of load bearing EPS products with acoustical properties . 35 Table D.1 — Correlation between bending strength and shear strength . 37 Table D.2 — Tabulated values of water vapour diffusion resistance index and
water vapour permeability . 38 Table D.3 — Test methods . 38 Table ZA.1 — Relevant clauses for Expanded polystyrene and intended use . 41 Table ZA.2 — Systems of attestation of conformity . 42 Table ZA.3 — Assignment of evaluation of conformity tasks for products under system 1 . 43 Table ZA.4 — Assignment of evaluation of conformity tasks for products under system 3 or system 3 combined with system 4 for reaction to fire . 44
Figures Figure B.1 — Relationship between compressive stress at 10 % deformation and apparent density for indirect testing; 1 – αααα = 0,90; n = 495 . 31 Figure B.2 — Relationship between thermal conductivity (at 50 mm reference thickness and 10 °C mean temperature) apparent density for indirect testing; 1 – αααα = 0,90; n = 3 873 . 32 Figure ZA.1 – Example CE marking information . 47
This document is one of a series of standards for insulation products used in buildings, but this standard may be used in other areas where appropriate. In pursuance of Resolution BT 20/1993 revised, CEN/TC 88 have proposed defining the standards listed below as a European package of standards. The package of standards comprises the following group of interrelated standards for the specifications of factory made thermal insulation products, all of which come within the scope of CEN/TC 88: EN 13162, Thermal insulation products for buildings — Factory made mineral wool (MW) products — Specification EN 13163, Thermal insulation products for buildings — Factory made products of expanded polystyrene (EPS) — Specification EN 13164, Thermal insulation products for buildings — Factory made products of extruded polystyrene foam (XPS) — Specification EN 13165, Thermal insulation products for buildings — Factory made rigid polyurethane foam (PUR) products — Specification EN 13166, Thermal insulation products for buildings — Factory made products of phenolic foam (PF) — Specification EN 13167, Thermal insulation products for buildings — Factor
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.