EN 3852:2002

Aerospace series - Pipe couplings, 60°, spherical, in titanium alloy TI-P64001 - Straight unions, welded, threaded

This standard specifies the characteristics of threaded welded straight unions for pipe couplings, 60°, spherical, in TI-P64001, for aerospace applications.
NOTE  Assembly in accordance with TR 4052.

Luft- und Raumfahrt - Rohrverschraubungen mit Kugelbuchsen, 60 °, aus Titanlegierung TI-P64001 - Gerade Verschraubungen zum Anschweißen

Diese Norm legt die Eigenschaften von geraden Verschraubungen zum Anschweißen für Rohrverschraubungen 60° mit Kugelbuchse, aus TI P64001, für Anwendungen in der Luft- und Raumfahrt fest.
ANMERKUNG   Montage nach TR 4052.

Aerospace series - Pipe couplings, 60°, spherical, in titanium alloy TI-P64001 - Straight unions, welded, threaded

General Information

• Status: Published
• Publication Date: 12-Nov-2002
• Withdrawal Date: 30-May-2003
• ICS: 49.080 - Aerospace fluid systems and components
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 3 - Mechanical
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Completion Date: 30-Jun-2017
• Ref Project: SIST EN 3852:2004 - Aerospace series - Pipe couplings, 60°, spherical, in titanium alloy TI-P64001 - Straight unions, welded, threaded

Standards Content (Sample)

SLOVENSKI STANDARD
01-maj-2004
Aerospace series - Pipe couplings, 60°, spherical, in titanium alloy TI-P64001 -
Straight unions, welded, threaded
Aerospace series - Pipe couplings, 60°, spherical, in titanium alloy TI-P64001 - Straight
unions, welded, threaded
Luft- und Raumfahrt - Rohrverschraubungen mit Kugelbuchsen, 60 °, aus Titanlegierung
TI-P64001 - Gerade Verschraubungen zum Anschweißen
Ta slovenski standard je istoveten z: EN 3852:2002
ICS:
49.080 /HWDOVNLLQYHVROMVNL Aerospace fluid systems and
KLGUDYOLþQLVLVWHPLLQGHOL components
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 3852
NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2002
ICS 49.080
English version
Aerospace series - Pipe couplings, 60°, spherical, in titanium
alloy TI-P64001 - Straight unions, welded, threaded
Série aérospatiale - Raccords sphériques, 60° , en alliage
de titane TI-P64001 - Raccords droits, soudés, filetés
This European Standard was approved by CEN on 30 August 2002.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2002 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 3852:2002 E
worldwide for CEN national Members.

Contents
Foreword.3
1 Scope .3
2 Normative references .3
3 Required characteristics.4
3.1 Configuration - Dimensions – Tolerances.4
3.2 Material.4
4 Designation.7
5 Marking .7
6 Quality assurance .7
Foreword
This document (EN 3852:2002) has been prepared by the European Association of Aerospace Manufacturers –
Standardization (AECMA-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received
the approval of the National Associations and the Official Services of the member countries of AECMA, prior to its
presentation to CEN.
This European Standard shall be given the status of a national standard, either by publication of an identical text or
by endorsement, at the latest by May 2003, and conflicting national standa
...