EN ISO 8367-2:1996
(Main)Packaging - Dimensional tolerances for general purpose sacks - Part 2: Sacks made from thermoplastic flexible film (ISO 8367-2:1993)
Packaging - Dimensional tolerances for general purpose sacks - Part 2: Sacks made from thermoplastic flexible film (ISO 8367-2:1993)
The tolerances of the following dimensions of sacks made from thermoplastic flexible film as defined in ISO 6590-2 are specified: thickness of plies, length of sack, width of sack, width of gusset, circumference of sack with gussets, width of bottom, width of valve, position of the leading edge of the valve sleeve, length of the valve sleeve, print position on sack.
Verpackung - Maßtoleranzen für Säcke für die allgemeine Verwendung - Teil 2: Säcke aus thermoplastischen Kunststoff-Folien (ISO 8367-2:1993)
Dieser Teil von ISO 8367 beschreibt eine Reihe von Toleranzen, die für die Herstellung von den in ISO 6590-2 festgelegten Säcken aus Kunststoff-Folie gelten.
Emballages - Tolérances dimensionnelles des sacs d'usage général - Partie 2: Sacs faits d'un film thermoplastique flexible (ISO 8367-2:1993)
La présente partie de l'ISO 8367 prescrit un ensemble de tolérances applicables à la fabrication de sacs faits d'un film thermoplastique flexible, tels que définis dans l'ISO 6590-2.
Embalaža - Dovoljena odstopanja mer večnamenskih vreč - 2. del: Vreče iz termoplastične folije (ISO 8367-2:1993)
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
01-oktober-1998
(PEDODåD'RYROMHQDRGVWRSDQMDPHUYHþQDPHQVNLKYUHþGHO 9UHþHL]
WHUPRSODVWLþQHIROLMH ,62
Packaging - Dimensional tolerances for general purpose sacks - Part 2: Sacks made
from thermoplastic flexible film (ISO 8367-2:1993)
Verpackung - Maßtoleranzen für Säcke für die allgemeine Verwendung - Teil 2: Säcke
aus thermoplastischen Kunststoff-Folien (ISO 8367-2:1993)
Emballages - Tolérances dimensionnelles des sacs d'usage général - Partie 2: Sacs faits
d'un film thermoplastique flexible (ISO 8367-2:1993)
Ta slovenski standard je istoveten z: EN ISO 8367-2:1996
ICS:
55.080 9UHþH9UHþNH Sacks. Bags
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
INTERNATIONAL
IS0 .
STANDARD
8367-2
First edition
1993-12-15
Packaging - Dimensional tolerances for
general purpose sacks -
Part 2:
Sacks made from thermoplastic flexible film
Emballages - Tokrances dimensionnelles des sacs d’usage g&&al -
Partie 2: Sacs faits d’un film thermoplastique flexible
Reference number
IS0 8367-2:1993(E)
IS0 8367=2:1993(E)
Foreword
IS0 (the International Organization for Standardization) is a worldwide
federation of national standards bodies (IS0 member bodies). The work
of preparing International Standards is normally carried out through IS0
technical committees. Each member body interested in a subject for
which a technical committee has been established has the right to be
represented on that committee. International organizations, governmental
and non-governmental, in liaison with ISO, also take part in the work. IS0
collaborates closely with the International Electrotechnical Commission
(IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are
circulated to the member bodies for voting. Publication as an International
Standard requires approval by at least 75 % of the member bodies casting
a vote.
International Standard IS0 8367-2 was prepared by Technical Committee
ISO/TC 122, Packaging, Sub-Committee SC 2, Sacks.
IS0 8367 consists of the following parts, under the general title Packa
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.