iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 13889:2003

(Main)

Forged steel shackles for general lifting purposes - Dee shackles and bow shackles - Grade 6 - Safety

Forged steel shackles for general lifting purposes - Dee shackles and bow shackles - Grade 6 - Safety

This European Standard specifies requirements for forged steel Dee and bow shackles of grade 6 for general lifting purposes in a range of working load limits 0,5 t to 25 t maximum.
This standard applies only to those shackles with threaded pins.
Annex A gives information on the safe use of shackles, annex B gives information on types of pins, and annex C gives an example of a designation system for forged steel shackles.
The hazards covered are identified in clause 4.

Geschmiedete Schäkel für allgemeine Hebezwecke - Gerade und geschweifte Schäkel - Güteklasse 6 - Sicherheit

Manilles forgées en acier pour applications générales levage - Manilles droites et manilles lyres - Classe 6 - Sécurité

La présente Norme européenne spécifie les prescriptions relatives aux manilles droites et aux manilles lyres forgées en acier de la classe 6 pour les applications générales de levage ayant des charges maximales d'utilisation comprises entre 0,5 t et 25 t maximum.
La présente norme s'applique uniquement aux manilles ayant des axes filetés.
L'Annexe A donne des informations sur l'utilisation sure des manilles, l'Annexe B donne des informations sur les types d'axes, et l'Annexe C donne un exemple d'un système de désignation pour les manilles forgées en acier.
Les phénomènes dangereux couverts sont identifiés à l'article 4.

Kovane jeklene skobe za splošne dvigalne namene – Ravne in zakrivljene skobe – Kakovostni razred 6 - Varnost

General Information

Status
Withdrawn
Publication Date
03-Jun-2003
Withdrawal Date
11-Nov-2008
ICS
53.020.30 - Accessories for lifting equipment
Technical Committee
CEN/TC 168 - Chains, ropes, webbing, slings and accessories - safaty
Drafting Committee
CEN/TC 168/WG 4 - Hooks and other accessories
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
12-Nov-2008
Completion Date
12-Nov-2008
Directive
98/37/EC - Machinery
Mandate
M/BC/CEN/91/1 - Standardization request to CEN/CENELEC concerning machines presenting hazards due to mobility or load lifting
Ref Project
SIST EN 13889:2004 - Forged steel shackles for general lifting purposes - Dee shackles and bow shackles - Grade 6 - Safety

Relations

Merged Into
EN 13889:2003+A1:2008 - Forged steel shackles for general lifting purposes - Dee shackles and bow shackles - Grade 6 - Safety
Effective Date
22-Dec-2008

Buy Standard

EN 13889:2004EN 13889:2004
PreviousNext
Standard
EN 13889:2004
English language
29 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 13889:2004
01-junij-2004
Kovane jeklene skobe za splošne dvigalne namene – Ravne in zakrivljene skobe –
Kakovostni razred 6 - Varnost
Forged steel shackles for general lifting purposes - Dee shackles and bow shackles -
Grade 6 - Safety
Geschmiedete Schäkel für allgemeine Hebezwecke - Gerade und geschweifte Schäkel -
Güteklasse 6 - Sicherheit
Manilles forgées en acier pour applications générales levage - Manilles droites et
manilles lyres - Classe 6 - Sécurité
Ta slovenski standard je istoveten z: EN 13889:2003
ICS:
53.020.30 Pribor za dvigalno opremo Accessories for lifting
equipment
SIST EN 13889:2004 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 13889:2004

---------------------- Page: 2 ----------------------

SIST EN 13889:2004
EUROPEAN STANDARD
EN 13889
NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2003
ICS 53.020.30
English version
Forged steel shackles for general lifting purposes - Dee
shackles and bow shackles - Grade 6 - Safety
Manilles forgées en acier pour applications générales Geschmiedete Schäkel für allgemeine Hebezwecke -
levage - Manilles droites et manilles lyres - Classe 6 - Gerade und geschweifte Schäkel - Güteklasse 6 -
Sécurité Sicherheit
This European Standard was approved by CEN on 25 April 2003.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2003 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13889:2003 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 13889:2004
EN 13889:2003 (E)
Contents page
Foreword.3
Introduction .4
1 Scope .5
2 Normative references .5
3 Terms and definitions.5
4 Hazards .7
5 Safety requirements .8
6 Verification of safety requirements.14
7 Marking .19
8 Manufacturer's certificate .19
9 Instructions for use .20
Annex A (informative) Safe use of shackles.21
Annex B (normative)  Shackle pins .26
Annex C (informative) Designation system for forged steel shackles.27
Annex ZA (informative) Relationship of thi
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 13411-3:2022(Main)
Terminations for steel wire ropes - Safety - Part 3: Ferrules and ferrule-securing
SIST EN 13411-3:2023

This document deals with the requirements for the ferrule-securing of eyes and endless loops.
It also deals with the requirements for ferrules for the ferrule-securing of eyes and endless loops.
This document applies to the ferrule-securing of eye terminations formed either by a Flemish eye or turn-back eye and covers ferrules made of non-alloy carbon steel and aluminium.
This document applies to slings and assemblies using steel wire ropes for general lifting applications up to and including 60 mm diameter conforming to EN 12385-4, lift ropes conforming to EN 12385-5 and spiral strand ropes conforming to EN 12385-10.
Type testing of ferrule-secured systems and manufacturing quality control requirements are also specified.
This document deals with all significant hazards, hazardous situations, and events relevant to this particular steel wire rope termination when used as intended and under conditions of use which are foreseeable by the manufacturer.
This document applies to terminations of steel wire ropes with ferrules and ferrule-securing which are manufactured after the date of this publication.
NOTE   One design of ferrule-secured turn-back eye termination using an oval aluminium ferule which satisfies the requirements of this document when securing ropes having rope grades up to and including 1960 is given for information in Annex A.

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13411-7:2021(Main)
Terminations for steel wire ropes - Safety - Part 7: Symmetric wedge socket
SIST EN 13411-7:2021

This document specifies the minimum requirements for symmetrical wedge socket terminations for stranded steel wire ropes conforming to EN 12385-5 for lifts.
This document covers those symmetric wedge sockets intended for use at temperatures between −20 °C and 100 °C.
This document only covers those symmetric wedge sockets that have welded socket bodies. An example of the construction and sizes of a symmetric wedge socket is given in informative Annex A.
The informative Annex B gives the recommendations for the safe use and inspection of symmetric wedge socket according to Annex A.
This document deals with all significant hazards, hazardous situations and events relevant to symmetric wedge sockets for terminations for steel wire ropes, when used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer.
The hazards covered by this document are identified in Clause 4.
This document applies to symmetric wedge sockets, which are manufactured after the date of its publication.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13411-9:2021(Main)
Terminations for steel wire ropes - Safety - Part 9: Solid thimbles
SIST EN 13411-9:2021

This document specifies the minimum requirements for solid thimbles made of steel or cast iron for terminations of stranded steel wire ropes.
This document is applicable to ferrule-secured terminations with solid thimbles in combination with ferrules (see EN 13411-3), that have an efficiency factor KT of at least 0,9, and to spliced terminations with solid thimbles (see EN 13411-2), that have an efficiency factor KT of at least 0,8, which are used as accessories for steel wire ropes, such as slings or wire rope assemblies, having a lifting, lowering or load-bearing effect in hoisting equipment.
Examples of designs of solid thimbles which meet the requirements of this standard are given in informative Annexes B and C.
Round thimbles (thimble with rotational symmetry around the bore) are not subject to this document.
This document is applicable to ferrule-secured terminations that are manufactured after the date of publication of this document.
Hazards that are dealt with in this document are listed in Clause 4.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 3266:2010/A1:2015(Amendment)
Forged steel eyebolts grade 4 for general lifting purposes (ISO 3266:2010/Amd 1:2015)
SIST EN ISO 3266:2010/A1:2016

2014-04-02 GVN: Draft for // ENQ received at ISO/CS (see ISO notification in dataservice on 2014-04-01).

  • Amendment
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13411-8:2011(Main)
Terminations for steel wire ropes - Safety - Part 8: Swage terminals and swaging
SIST EN 13411-8:2012

This European Standard specifies the minimum requirements for swage terminals and the securing of such terminals by a swaging process to carbon steel rope conforming to EN 12385-4 and EN 12385-5, spiral strand rope conforming to EN 12385-10 and stainless steel stranded rope.
This European Standard is not applicable to spiral rope incorporating full lock wires - see EN 12385-10 -, nor ropes with coverings and /or fillings (see 3.6.3 of EN 12385-2:2002+A1:2008).
This European Standard is applicable to swaged terminations that have a terminal efficiency factor, KT, of at least 0,9 and are used as part of a wire rope accessory such as a sling, or wire rope assembly that performs a raising, lowering, hauling or supporting function on lifting machinery.
This European Standard is applicable to terminals of the following types that are made of carbon or stainless steel:
-   open swage socket;
-   closed swage socket;
-   swage terminal with thread;
-   swage terminal end stop.
This European Standard deals with all significant hazards, hazardous situations and events relevant to swaged terminations, when used as intended and under conditions of misuse which are reasonably foreseeable (see Clause 4).
This European Standard applies to swaged terminations which are manufactured after the date of its publication.
This European Standard is not applicable to swaged terminations used for anchoring ropes to winch drums.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 3266:2010(Main)
Forged steel eyebolts grade 4 for general lifting purposes (ISO 3266:2010)
SIST EN ISO 3266:2010

ISO 3266:2010 specifies the general characteristics, performance and critical dimensions necessary for interchangeability and compatibility with other components, of forged steel eyebolts grade 4 for general lifting purposes. These eyebolts can be used for axial and inclined loading.
ISO 3266:2010 specifies the dimensions of the eyes of eyebolts permitting direct connection with shackles of the same working load limit as those defined in ISO 2415. These dimensions also allow designs with a larger eye which can permit direct connection with sling hooks of similar working load limit.
ISO 3266:2010 covers all significant hazards, hazardous situations and events relevant to eyebolts grade 4.
ISO 3266:2010 is applicable to eyebolts grade 4 for use in the temperature range of -20 ºC to 200 ºC.
ISO 3266:2010 is not applicable to eyebolts which are not forged in one piece.
ISO 3266:2010 is not applicable to forged steel eyebolts grade 4 manufactured before the date of its publication as an International Standard.

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1677-6:2001+A1:2008(Main)
Components for slings - Safety - Part 6: Links - Grade 4
SIST EN 1677-6:2001+A1:2009

Dieser Teil von EN 1677 legt Anforderungen für geschweißte Aufhänge-, Zwischen- und Endglieder und Aufhänge¬garnituren aus Stahl in Güteklasse 4 im Bereich bis 67 t Tragfähigkeit fest, die hauptsächlich Verwendung finden in:
   Anschlagketten nach EN 818 5,
   Anschlagseilen aus Stahldrahtseilen nach EN 13414 1 und
   textilen Anschlagmitteln nach EN 1492 1 und EN 1492 2,
die zum Heben von Gegenständen, Materialien und Gütern vorgesehen sind.
Die Gefährdungen, die durch diesen Teil von EN 1677 abgedeckt werden, sind in Abschnitt 4 aufgeführt.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13414-3:2003+A1:2008(Main)
Steel wire rope slings - Safety - Part 3: Grommets and cable-laid slings
SIST EN 13414-3:2004+A1:2009

This European Standard specifies the construction requirements, calculation of WLL, testing and certification of steel wire rope grommets, cable-laid grommets and cable-laid slings using strand and wire rope conforming to EN 12385-4.
The hazards covered by this standard are identified in clause 4.
This standard covers ferrule-secured cable-laid slings up to 60mm.

  • Standard
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1492-2:2000+A1:2008(Main)
Textile slings - Safety - Part 2: Roundslings made of man-made fibres for general purpose use
SIST EN 1492-2:2001+A1:2009

This European Standard specifies the requirements related to safety, including methods of rating and testing roundslings up to 40 tonnes working load limit (in straight lift) and two-, three-, and four-leg roundsling assemblies, with or without fittings, made of polyamide, polyester and polypropylene.
The roundslings covered by this Part of EN 1492 are intended for general purpose lifting operations, i.e. when used for lifting objects, materials or goods which require no deviations from the requirements, safety factors or WLL’s specified. Lifting operations not covered by this standard include the lifting of persons, potentially dangerous materials such as molten metal and acids, glass sheets, fissile materials, nuclear reactors and where special conditions apply.
Roundslings conforming to this European Standard are suitable for use and storage in the following temperature ranges:
a)   polyester and polyamide: -40 °C to 100 °C,
b)   polypropylene: -40 °C to 80 °C
This European Standard does not apply to the types of roundsling indicated below:
a)   roundslings designed for securing or lashing of cargoes to each other on pallets and platforms or in vehicles;
b)   slings of tubular webbing without filling.
This European Standard deals with the technical requirements to minimize the hazards listed in clause 4 which can arise during the use of roundslings when carried out in accordance with the instructions and specifications given by the manufacturer or authorized representative.

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1492-1:2000+A1:2008(Main)
Textile slings - Safety - Part 1: Flat woven webbing slings made of man-made fibres for general purpose use
SIST EN 1492-1:2001+A1:2009

This European Standard specifies the requirements related to safety, including methods of rating and testing single-, two-, three-, four-leg and endless sewn flat woven webbing slings, with or without fittings,  made of polyamide, polyester and polypropylene man-made fibre webbing in the width range of 25 mm to 450 mm inclusive.
The flat woven webbing slings covered by this Part of EN 1492 are intended for general purpose lifting operations, i.e. when used for lifting objects, materials or goods which require no deviations from the requirements, safety factors or working load limits specified. Lifting operations not covered by this standard would include the lifting of persons, potentially dangerous materials such as molten metal and acids, glass sheets, fissile materials, nuclear reactors and where special conditions apply.
Flat woven webbing slings conforming to this European Standard are suitable for use and storage in the following temperature ranges:
a)   polyester and polyamide -40°C to 100°C,
b)   polypropylene -40°C to 80°C
This European Standard does not apply to the types of webbing sling indicated below:
a)   slings such as bag slings, nets (consisting of several crossed webbings stitched together), ‘adjustable’ slings (containing, for example, intermediate buckles stitched along the webbing), etc.;
b)   slings made from webbing woven from monofilament yarns;
c)   slings designed for pre-slinging and intended not to be re-used;
This European Standard deals with the technical requirements to minimize the hazards listed in clause 4 which can arise during the use of flat woven webbing slings when carried out in accordance with the instructions and specifications given by the manufacturer or authorized representative.

  • Standard
    36 pages
    English language
    sale 10% off
    e-Library read for
    1 day