prEN 6051
(Main)Aerospace series - Collar, swage locking, shear type, in aluminium alloy 3003, conversion coating - Inch series
Aerospace series - Collar, swage locking, shear type, in aluminium alloy 3003, conversion coating - Inch series
This document specifies the characteristics of a collar, swage locking, shear type, in aluminium alloy 3003, with a maximum operating temperature of 80 °C for aerospace application. This document is applicable in combination with EN 6050, EN 6100 or EN 6120.
Luft- und Raumfahrt - Schließring für Quetschverriegelung, für Scherbeanspruchung, aus Aluminiumlegierung 3003, Schmierfilm behandelt - Zoll-Reihe
Série aérospatiale - Bague à sertir, type cisaillement, en alliage d’aluminium 3003, revêtement de conversion - Série en inches
Le présent document spécifie les caractéristiques d’une bague à sertir, de type cisaillement, en alliage d’aluminium 3003, avec une température maximale d'utilisation de 80 °C pour les applications aérospatiales. Ce document est applicable conjointement avec l’EN 6050, l’EN 6100 ou l’EN 6120.
Aeronavtika - Pritrdilni obroči, strižni tip, iz aluminijeve zlitine 3003, prevleke - Palčne mere
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
01-april-2023
Aeronavtika - Pritrdilni obroči, strižni tip, iz aluminijeve zlitine 3003, prevleke -
Palčne mere
Aerospace series - Collar, swage locking, shear type, in aluminium alloy 3003,
conversion coating - Inch series
Luft- und Raumfahrt - Schließring für Quetschverriegelung, für Scherbeanspruchung,
aus Aluminiumlegierung 3003, Schmierfilm behandelt - Zoll-Reihe
Série aérospatiale - Bague à sertir, type cisaillement, en alliage d’aluminium 3003,
revêtement de conversion - Série en inches
Ta slovenski standard je istoveten z: prEN 6051
ICS:
49.030.99 Drugi vezni elementi Other fasteners
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
DRAFT
EUROPEAN STANDARD
NORME EUROPÉENNE
EUROPÄISCHE NORM
February 2023
ICS 49.030.99
English Version
Aerospace series - Collar, swage locking, shear type, in
aluminium alloy 3003, conversion coating - Inch series
Série aérospatiale - Bague à sertir, type cisaillement, en Luft- und Raumfahrt - Schließring für
alliage d'aluminium 3003, revêtement de conversion - Quetschverriegelung, für Scherbeanspruchung, aus
Série en inches Aluminiumlegierung 3003, Schmierfilm behandelt -
Zoll-Reihe
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee ASD-
STAN.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 6051:2023 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Requirements . 5
4.1 Configuration, dimensions, tolerances and mass. 5
4.2 Material and surface treatment . 6
5 Designation . 6
6 Marking . 6
7 Technical specification . 6
8 Example of installation . 7
9 Quality Management System . 7
Bibliography . 8
European foreword
This document (prEN 6051:2023) has been prepared by the Aerospace and Defence Industries
Association of Europe — Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, thi
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.