EN 2287:2022

Aerospace series - Bush, plain, in corrosion resisting steel with self-lubricating liner - Dimensions and loads

This European Standard specifies the characteristics of plain bushes in corrosion resisting steel with self lubricating liner and the design recommendation of shafts and housings.
The bushes are intended for operation within the temperature range of −55 C to 163 C and assembly with an interference fit into fixed and moving aerospace parts.

Luft- und Raumfahrt - Buchse ohne Flansch aus korrosionbeständigem Stahl mit selbstschmierender Beschichtung - Maße und Belastungen

Dieses Dokument legt die Eigenschaften von Buchsen ohne Flansch aus korrosionsbeständigem Stahl mit selbstschmierender Beschichtung sowie die Konstruktionsempfehlung für Wellen und Gehäuse fest.
Die Buchsen sind für den Betrieb innerhalb eines Temperaturbereichs von −55 °C bis 163 °C und den Einbau mit Übermaßpassung in feste und bewegliche Luft- und Raumfahrtteile bestimmt.

Série aérospatiale - Bague cylindrique en acier résistant à la corrosion à garniture autolubrifiante - Dimensions et charges

Le présent document spécifie les caractéristiques des bagues cylindriques en acier résistant à la corrosion, à garniture autolubrifiante, ainsi que la recommandation de conception des arbres et des logements.
Les bagues sont prévues pour être utilisées dans une plage de températures de −55 °C à 163 °C et être montées par ajustement avec serrage dans des pièces fixes ou mobiles destinées à l’aérospatiale.

Aeronavtika - Drsne puše, navadne, iz korozijsko odpornega jekla s samomazalno oblogo - Mere in obremenitve

Ta evropski standard določa lastnosti drsnih puš iz korozijsko odpornega jekla s samomazalno oblogo ter priporočilo za projektiranje gredi in ohišij.
Puše so predvidene za uporabo v temperaturnem območju od –55 °C do 163 °C ter montažo z nateznim spojem v fiksnih in gibljivih delih aeronavtičnih vozil.

General Information

• Status: Published
• Publication Date: 06-Sep-2022
• ICS: 49.030.99 - Other fasteners
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 3/S 1 - Parts of Mechanical Systems
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 07-Sep-2022
• Completion Date: 07-Sep-2022
• Ref Project: SIST EN 2287:2022 - Aerospace series - Bush, plain, in corrosion resisting steel with self-lubricating liner - Dimensions and loads

Relations

• Replaces: EN 2287:2017 - Aerospace series - Bush, plain, in corrosion resisting steel with self-lubricating liner - Dimensions and loads
• Effective Date: 03-Oct-2018

Standards Content (Sample)

SLOVENSKI STANDARD
01-november-2022
Nadomešča:
SIST EN 2287:2017
Aeronavtika - Drsne puše, navadne, iz korozijsko odpornega jekla s samomazalno
oblogo - Mere in obremenitve
Aerospace series - Bush, plain, in corrosion resisting steel with self-lubricating liner -
Dimensions and loads
Luft- und Raumfahrt - Buchse ohne Flansch aus korrosionbeständigem Stahl mit
selbstschmierender Beschichtung - Maße und Belastungen
Série aérospatiale - Bague cylindrique en acier résistant à la corrosion à garniture
autolubrifiante - Dimensions et charges
Ta slovenski standard je istoveten z: EN 2287:2022
ICS:
49.025.10 Jekla Steels
49.030.99 Drugi vezni elementi Other fasteners
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN 2287
EUROPEAN STANDARD
NORME EUROPÉENNE
September 2022
EUROPÄISCHE NORM
ICS 49.030.99 Supersedes EN 2287:2017
English Version
Aerospace series - Bush, plain, in corrosion resisting steel
with self-lubricating liner - Dimensions and loads
Série aérospatiale - Bague cylindrique en acier Luft- und Raumfahrt - Buchse ohne Flansch aus
résistant à la corrosion à garniture autolubrifiante - korrosionbeständigem Stahl mit selbstschmierender
Dimensions et charges Beschichtung - Maße und Belastungen
This European Standard was approved by CEN on 26 March 2021.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 2287:2022 E
worldwide for CEN national Members.

Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Requirements . 4
4.1 Configuration — Dimensions — Masses . 4
4.2 Surface roughness . 4
4.3 Materials . 4
5 Designation . 8
6 Marking . 8
7 Technical specification . 8
8 Design recommendation . 9
9 Quality management system. 9
Bibliography. 10

European foreword
This document (EN 2287:2022) has been prepared by the Aerospace and Defence Industries
Association of Europe – Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this document has
received the approval of the National Associations and the Official Services of the member countries of
ASD-STAN, prior to its presentation to CEN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by March 2023, and conflicting national standards shall
be withdrawn at the latest by March 2023.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 2287:2017.
Any feedback and questions on this document should be directed to the users’ national standards body.
A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
1 Scope
This document specifies the characteristics of plain bushes in corrosion resisting steel with self-
lubricating liner and the design recommendation of shafts and housings.
The bushes are intended for operation within the temperature range of −55 °C to 163 °C and assembly
w
...