EN ISO 8130-5:2021

Coating powders - Part 5: Determination of flow properties of a powder/air mixture (ISO 8130-5:2021)

This document specifies a method for estimating the flow properties of a mixture of coating powder and air.
The results obtained are influenced by the composition of the coating powder, its density, particle size distribution and particle shape, together with the tendency of the particles to agglomerate and to accept a charge.

Pulverlacke - Teil 5: Bestimmung der Fließeigenschaften eines Pulver-Luft-Gemisches (ISO 8130-5:2021)

Dieses Dokument legt ein Verfahren zur Abschätzung der Fließeigenschaften eines Pulverlack-Luft-Gemisches fest.
Die erhaltenen Ergebnisse werden von der Zusammensetzung des Pulverlackes, seiner Dichte, Teilchen-größenverteilung und Teilchenform beeinflusst, zusammen mit der Tendenz der Teilchen zum Agglomerieren und zum triboelektrischen Aufladen.

Poudres pour revêtement - Partie 5: Détermination de l'aptitude à la fluidisation d'un mélange poudre/air (ISO 8130-5:2021)

Le présent document spécifie une méthode pour l'estimation de l'aptitude à la fluidisation d'un mélange de poudre pour revêtement et d'air.
Les résultats obtenus sont influencés par la composition de la poudre pour revêtement, sa masse volumique, la distribution de la taille des particules et la forme des particules, ainsi que par la tendance des particules à s'agglomérer et à se charger.

Praškasti premazi - 5. del: Določanje pretočnih lastnosti zmesi prašek/zrak (ISO 8130-5:2021)

General Information

• Status: Published
• Publication Date: 13-Jul-2021
• Withdrawal Date: 30-Jan-2022
• ICS: 87.040 - Paints and varnishes
• Technical Committee: CEN/TC 139 - Paints and varnishes
• Drafting Committee: CEN/TC 139 - Paints and varnishes
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 14-Jul-2021
• Completion Date: 14-Jul-2021
• Ref Project: SIST EN ISO 8130-5:2021 - Coating powders - Part 5: Determination of flow properties of a powder/air mixture (ISO 8130-5:2021)

Relations

• Replaces: EN ISO 8130-5:2010 - Coating powders - Part 5: Determination of flow properties of a powder/air mixture (ISO 8130-5:1992)
• Effective Date: 21-Jul-2021

Standards Content (Sample)

SLOVENSKI STANDARD
01-september-2021
Nadomešča:
SIST EN ISO 8130-5:2012
Praškasti premazi - 5. del: Določanje pretočnih lastnosti zmesi prašek/zrak (ISO
8130-5:2021)
Coating powders - Part 5: Determination of flow properties of a powder/air mixture (ISO
8130-5:2021)
Pulverlacke - Teil 5: Bestimmung der Fließeigenschaften eines Pulver-Luft-Gemisches
(ISO 8130-5:2021)
Poudres pour revêtement - Partie 5: Détermination de l'aptitude à la fluidisation d'un
mélange poudre/air (ISO 8130-5:2021)
Ta slovenski standard je istoveten z: EN ISO 8130-5:2021
ICS:
87.040 Barve in laki Paints and varnishes
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 8130-5
EUROPEAN STANDARD
NORME EUROPÉENNE
July 2021
EUROPÄISCHE NORM
ICS 87.040 Supersedes EN ISO 8130-5:2010
English Version
Coating powders - Part 5: Determination of flow
properties of a powder/air mixture (ISO 8130-5:2021)
Poudres pour revêtement - Partie 5: Détermination de Pulverlacke - Teil 5: Bestimmung der
l'aptitude à la fluidisation d'un mélange poudre/air Fließeigenschaften eines Pulver-Luft-Gemisches (ISO
(ISO 8130-5:2021) 8130-5:2021)
This European Standard was approved by CEN on 28 April 2021.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 8130-5:2021 E
worldwide for CEN national Members.

Contents Page
European foreword . 3

European foreword
This document (EN ISO 8130-5:2021) has been prepared by Technical Committee ISO/TC 35 "Paints
and varnishes" in collaboration with Technical Committee CEN/TC 139 “Paints and varnishes” the
secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by January 2022, and conflicting national standards shall
be withdrawn at the latest by January 2022.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 8130-5:2010.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN websites.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 8130-5:2021 has been approved by CEN as EN ISO 8130-5:2021 without any
modification.
INTERNATIONAL ISO
STANDARD 8130-5
Second edition
2021-06
Coating powders —
Part 5:
Determination of flow properties of a
powder/air mixture
Poudres pour revêtement —
Partie 5: Détermination de l'aptitude à la fluidisation d'un mélange
poudre/air
Reference number
ISO 8130-5:2021(E)
©
ISO 2021
ISO 8130-5:2021(E)
© ISO 2021
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland
ii © ISO 2021 – All rights reserved

ISO 8130-5:2021(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 1
5 Apparatus . 1
6 Sampling . 3
7 Procedure. 4
7.1 Calibration of apparatus . 4
7.2 Determination of flow properties . 4
8 Expression of results . 4
9 Precision . 5
10 Test report . 5
ISO 8130-5:2021(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/
...