Aerospace series - Cables, optical 125 μm diameter cladding - Part 103: Semi-loose, ruggedized simplex construction 62,5/125 µm GI fibre nominal 2,74 mm, outside diameter - Product standard

This document specifies the general characteristics, conditions for qualification, acceptance and quality assurance for a fibre optic cable with a 62,5 µm/125 µm simplex fibre, 2,74 mm outside cable diameter and of semi-loose construction. The basic construction is the cable defined in EN 4641 102 with added sheaths for ruggedized usages.

Luft- und Raumfahrt - Lichtwellenleiterkabel, Claddingdurchmesser 125 µm - Teil 103: Halbfester Leiteraufbau, widerstandsfähige Simplexkonstruktion GI 62,5 µm/125 µm Faser, Kabelaußendurchmesser 2,74 mm - Produktnorm

Série Aérospatiale - Câbles, optiques, diamètre extérieur de la gaine optique 125 μm - Partie 103 : Câble à structure semi-libre, renforcée, fibre simplex à gradient d'indice 62,5 µm/125 µm, diamètre extérieur 2,74 mm - Norme de produit

Le présent document spécifie les caractéristiques générales ainsi que les conditions de qualification, de réception et d'assurance qualité pour un câble à fibre optique avec une fibre simplex à gradient d'indice 62,5 µm/125 µm, un diamètre extérieur de 2,74 mm et une structure semi-libre. La construction basique est le câble défini dans l’EN 4641-102 avec des gaines en plus pour des usages renforcés.

Aeronavtika - Kabli, optični, zunanji premer obloge 125 µm - 103. del: Poltrdi kabli lahke izvedbe 62,5/125 µm GI, zunanji premer vlakna 2,74 mm - Standard za izdelek

General Information

Status
Not Published
Publication Date
23-Dec-2024
Technical Committee
Drafting Committee
Current Stage
4060 - Closure of enquiry - Enquiry
Start Date
21-Sep-2023
Completion Date
21-Sep-2023

Relations

Buy Standard

Draft
prEN 4641-103:2023 - BARVE
English language
15 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 4641-103:2023
01-september-2023
Aeronavtika - Kabli, optični, zunanji premer obloge 125 µm - 103. del: Poltrdi kabli
lahke izvedbe 62,5/125 µm GI, zunanji premer vlakna 2,74 mm - Standard za izdelek
Aerospace series - Cables, optical 125 μm diameter cladding - Part 103: Semi-loose,
ruggedized simplex construction 62,5/125 µm GI fibre nominal 2,74 mm, outside
diameter - Product standard
Luft- und Raumfahrt - Lichtwellenleiterkabel, Claddingdurchmesser 125 µm - Teil 103:
Halbfester Leiteraufbau, widerstandsfähige Simplexkonstruktion GI 62,5 µm/125 µm
Faser, Kabelaußendurchmesser 2,74 mm - Produktnorm
Série aérospatiale - Câble, optique, diamètre extérieur de la gaine optique 125 µm -
Partie 103 : Câble à structure semi libre, renforcée, monovoie fibre à gradient d'indice
62,5 µm/125 µm, diamètre extérieur 2,74 mm - Norme de produit
Ta slovenski standard je istoveten z: prEN 4641-103
ICS:
33.180.10 (Optična) vlakna in kabli Fibres and cables
49.090 Oprema in instrumenti v On-board equipment and
zračnih in vesoljskih plovilih instruments
oSIST prEN 4641-103:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 4641-103:2023

---------------------- Page: 2 ----------------------
oSIST prEN 4641-103:2023


DRAFT
EUROPEAN STANDARD
prEN 4641-103
NORME EUROPÉENNE

EUROPÄISCHE NORM

June 2023
ICS 49.090 Will supersede EN 4641-103:2010
English Version

Aerospace series - Cables, optical 125 µm diameter
cladding - Part 103: Semi-loose, ruggedized simplex
construction 62,5/125 µm GI fibre nominal 2,74 mm,
outside diameter - Product standard
Série aérospatiale - Câble, optique, diamètre extérieur Luft- und Raumfahrt - Lichtwellenleiterkabel,
de la gaine optique 125 µm - Partie 103 : Câble à Claddingdurchmesser 125 µm - Teil 103: Halbfester
structure semi libre, renforcée, monovoie fibre à Leiteraufbau, widerstandsfähige Simplexkonstruktion
gradient d'indice 62,5 µm/125 µm, diamètre extérieur GI 62,5 µm/125 µm Faser, Kabelaußendurchmesser
2,74 mm - Norme de produit 2,74 mm - Produktnorm
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee ASD-
STAN.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 4641-103:2023 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 4641-103:2023
prEN 4641-103:2023 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 6
4 Required characteristics . 6
5 Cable construction .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.