prEN 18135
(Main)Resilient, textile, laminate and modular mechanical locked floor coverings - Circular Economy - Floor coverings and underlays passport
Resilient, textile, laminate and modular mechanical locked floor coverings - Circular Economy - Floor coverings and underlays passport
This document specifies the minimum and optional content of the product passport and the unified code (definition of symbols, abbreviated terms, ...) relating to the identification of floor coverings and underlays excluding their packaging necessary for the implementation of a circular economy. The intended use of this document is to provide information that allows different stakeholders to assess floor coverings and underlays on product content, environmental information, reuse, and/or recycling potential.
Elastische, textile, Laminat- und modulare mechanisch verriegelnde Bodenbeläge - Kreislaufwirtschaft - Pass für Bodenbelag und Verlegeunterlagen
Dieses Dokument legt den mindestens erforderlichen und den optionalen Inhalt des Produktpasses und des einheitlichen Codes (Definition von Symbolen, Abkürzungen usw.) für die Identifizierung von Bodenbelägen und Verlegeunterlagen mit Ausnahme ihrer Verpackung fest, die für die Durchführung einer Kreislaufwirtschaft erforderlich sind. Zweck dieses Dokuments ist es, Informationen bereitzustellen, die es verschiedenen Interessengruppen ermöglichen, Bodenbeläge und Verlegeunterlagen hinsichtlich Produktinhalt, Umweltinformationen, Wiederverwendung und/oder deren Recyclingpotenzial zu bewerten.
Revêtements de sol résilients, textiles, stratifiés et modulaires à clipsage mécanique - Économie circulaire - Passeport pour revêtements de sol et sous-couches
Le présent document spécifie le contenu minimal et le contenu facultatif du passeport de produit et le code unifié (définition des symboles, termes abrégés …) relatifs à l’identification des revêtements de sol et des sous-couches, à l’exclusion de leur emballage, nécessaires pour la mise en œuvre d’une économie circulaire. L’utilisation prévue du présent document est de fournir des informations qui permettent aux différentes parties prenantes d’évaluer les revêtements de sol et les sous-couches en ce qui concerne le contenu du produit, les informations environnementales, la réutilisation et/ou le potentiel de recyclage.
Netekstilne, tekstilne, laminirane in modularne mehansko spojene talne obloge - Krožno gospodarstvo - Potni list izdelka za talne obloge in podloge
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
01-december-2024
Netekstilne, tekstilne, laminirane in modularne mehansko spojene talne obloge -
Krožno gospodarstvo - Potni list izdelka za talne obloge in podloge
Resilient, textile, laminate and modular mechanical locked floor coverings - Circular
Economy - Floor coverings and underlays passport
Elastische, textile, Laminat- und modulare mechanisch verriegelnde Bodenbeläge -
Kreislaufwirtschaft - Pass für Bodenbelag und Verlegeunterlagen
Revêtements de sol résilients, textiles, stratifiés et modulaires à clipsage mécanique -
Économie circulaire - Passeport pour les revêtements de sol et les sous-couches
Ta slovenski standard je istoveten z: prEN 18135
ICS:
13.020.20 Okoljska ekonomija. Environmental economics.
Trajnostnost Sustainability
97.150 Talne obloge Floor coverings
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
DRAFT
EUROPEAN STANDARD
NORME EUROPÉENNE
EUROPÄISCHE NORM
October 2024
ICS
English Version
Resilient, textile, laminate and modular mechanical locked
floor coverings - Circular Economy - Floor coverings and
underlays passport
Elastische, textile, Laminat- und modulare mechanisch
verriegelnde Bodenbeläge ¿ Kreislaufwirtschaft - Pass
für Bodenbelag und Unterlagen
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 134.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 18135:2024 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Passport content . 7
4.1 Validity rules . 7
4.2 Identification requirements . 7
4.2.1 Product or family of products identification . 7
4.2.2 Supplier identification . 7
4.2.3 Passport issuance . 7
4.3 Information on constituents and structure of the product . 7
4.3.1 Product constituents and structure of the product . 7
4.3.2 Hazard statements . 8
4.3.3 Pre-consumer recycled materials . 8
4.3.4 Post-consumer recycled materials . 9
4.3.5 Renewable materials . 9
4.4 Environmental information . 10
4.5 Information on use phase . 10
4.6 Information on end of use . 10
4.6.1 Design for disassembly . 10
4.6.2 Design for extended product lifetime . 11
4.6.3 Design for avoiding waste . 11
5 Unified code for floor covering for indoor use . 11
Annex A (informative) Example of product passport . 16
Bibliography . 19
European foreword
This document (prEN 18135:2024) has been prepared by Technical Committee CEN/TC 134 “Resilient,
textile, laminate and modular mechanical locked floor coverings”, the secretariat of which is held by NBN.
This document is currently submitted to the CEN Enquiry.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association and supports essential requirements of EU Directive(s).
Introduction
This product passport is intended to provide stakeholders with standardized information about a
product throughout its life cycle.
The passport defines what standard information to provide about products in transactions between
stakeholders throughout the chain. It helps to facilitate a circular economy for floor coverings by
providing users with information on a product’s constituents and structure and on how to treat the
product at end of life. The document also describes a system for unified coding of products to enable
simple identification.
Who does the standard address:
— Manufacturers
— End users
— Retailers
— Customers
— Contractors
— Installers
— Facility manager
— Recyclers
— Designers
— Developers
— Demolition professionals
— Disassemblers – flooring removers
This document is linked to the following Circular Economy standardization documents for floor
coverings:
— EN 17861: Resilient, textile, laminate and modular mechanical locked floor coverings — Circular
Economy — Terms and definitions
— CEN TS XXXX: Resilient, textile, laminate and modular mechanical locked floorcoverings — Circular
Economy and Sustainability — Recommendations/Guidelines for Design
1 Scope
This document specifies the minimum and optional content of the product passport and the unified code
(definition of symbols, abbreviated terms, …) relating to the identification of floor coverings and
underlays excluding their packaging necessary for the implementation of a circular economy. The
intended use of this document is to provide information that allows different stakeholders to assess floor
coverings and underlays on product content, environmental information, reuse, and/or recycling
potential.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
EN ISO 1043-1 , Plastics — Symbols and abbreviated terms — Part 1: basic polymers and their special
characteristics (ISO 1043-1)
EN ISO 1043-3, Plastics — Symbols and abbreviated terms — Part 3: Plasticizers (ISO 1043-3)
EN ISO 1043-4, Plastics — Symbols and abbreviated terms — Part 4: Flame retardants (ISO 1043-4)
EN 17861, Resilient, textile, laminate and modular mechanical locked floor coverings — Circular Economy
— Terms and definitions
3 Terms and definitions
For the purposes of this document, the terms and definitions given in EN 17861 and the following apply.
ISO and IEC maintain terminology databases for use in standardization at the following addresses:
— ISO Online browsing platform: available at https://www.iso.org/obp
— IEC Electropedia: available at https://www.electropedia.org/
3.1
intended use
use of a product in accordance with the specifications, instructions and information provided by the
manufacturer
Note 1 to entry: This definition is consistent with the European Regulation EU No 305/2011.
[SOURCE: ISO/IEC Guide 51:2014, Definition 3.6 adapted]
3.2
demounting
removing a product from its mounting or setting, without damaging the product or its performance (e.g.
static and mechanical functions) or contaminating other products or assemblies
Note 1 to entry: Example: modular loose laid floor covering remove from its place while preserving its integrity.
As impacted by EN ISO 1043-1:2011/A1:2016.
3.3
dismantling
splitting a product into materials that can be reused or recycled
Note 1 to entry: Example: pieces of backing separated from the rest of the floor covering and re-processed to make
a new backing.
3.4
disassembling
splitting a system into sub-elements the product and its sub-elements that can be reused or recycled
Note 1 to entry: Example: underlayer removed from a floor covering system while preserving its integrity and
reused as a new underlayer for a new floor covering.
3.5
refurbishment
renovation and restoration to intended use condition
[SOURCE: ISO 10785:2011, Definition 3.27]
3.6
remanufacturing
industrial process by which a previously sold, worn or non-functional product is returned to the original
same as-new condition or better
[SOURCE: based on ISO 16714:2008]
3.7
biomass cascading
biomass that has been processed into a bio-based end product is used at least once more, either as a
material or as an energy source. Biomass cascade use is differentiated into:
— single-stage cascade: the bio-based end product is used directly for energy after the material use has
taken place.
— multi-stage cascade: the bio-based end product is used at least once more for material use
[SOURCE: Umweltbundesamt – Germany:
https://www.umweltbundesamt.de/sites/default/files/medien/1410/publikationen/2017-06-
13_texte_53-2017_biokaskaden_summary.pdf
3.8
system
finished product which is a combination of the floor covering and underlays installed separately in situ
3.9
third party
person or body that is recognized as being independent of the parties involved, as concerns the issues in
question
[SOURCE: ISO 14050:2020, 3.2.8: Environmental management – Vocabulary]
4 Passport content
4.1 Validity rules
The information contained in this passport is valid at the time it was issued, i.e. on the date mentioned in
point 4.2.3. A new passport is mandatory when the name and brand are changed or when changes occur
in 4.3. An update of the passport is mandatory when changes occur in 4.2.1, excluding product name and
brand, 4.2.2 and 4.2.3.
4.2 Identification requirements
4.2.1 Product or family of products identification
— Product names: optional
— Product or product family Identification Code: from supplier
— Global Trade Item Number: optional
— Description: corresponding specifications standard e.g. tufted tiles according to EN 1307. If none
then a brief description (max. 8 words - e.g. resilient PVC on foam)
4.2.2 Supplier identification
— Company name
— Unique Identification Code of Supplier: optional
— Address
— Email contact information
4.2.3 Passport issuance
— Version number: e.g. 1, 2 … update with the last version
— Date of passport version (DD/MM/YYYY)
4.3 Information on constituents and structure of the product
4.3.1 Product constituents and structure of the product
4.3.1.1 General
— The disclosure is third party validated: Yes/No
— Direct link to the product disclosure: optional
NOTE The supplier can use recognized solutions such as environmental labels or declarations. EN ISO 14021
specifies requirem
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.