Rubber hoses and hose assemblies - Textile reinforced hydraulic type - Specification

This European Standard specifies requirements for three types of textile reinforced rubber hoses and hose assemblies of nominal bore from 5 to 100. The types are defined in Clause 3.
They are suitable for use with:
-   hydraulic fluids in accordance with ISO 6743 4 with the exception of HRD R, HFD S and HFD at temperatures ranging from -40 °C to 100 °C;
-   water-based fluids at temperatures ranging from -40 °C to +70 °C;
-   water at temperature ranging from 0 °C to +70 °C.
The European Standard does not include requirements for end fittings. It is limited to the performance of hoses and hose assemblies.
NOTE 1   The hoses are not suitable for use with castor oil based and ester based fluids.
NOTE 2   Hoses and hose assemblies are not be operated outside the limits of this standard.
NOTE 3   Requirements for hydraulic hoses for underground mining are standardized in separate standards.

Gummischläuche und -schlauchleitungen - Hydraulikschläuche mit Textileinlage - Spezifikation

Diese Europäische Norm legt Anforderungen für fünf Typen von Schläuchen und Schlauchleitungen mit Textileinlagen vom Nenndurchmesser von 5 bis 100 fest. Die Festlegung der Typen erfolgt in Abschnitt 3.
Sie sind geeignet zur Verwendung mit:
   Hydraulikflüssigkeiten nach ISO 6743-4 mit Ausnahme von HFD R, HFD S und HFD T in einem Temperaturbereich von –40 °C bis +100 °C;
   wässrigen Flüssigkeiten in einem Temperaturbereich von –40 °C bis +70 °C;
   Wasser in einem Temperaturbereich von 0 °C bis +70 °C.
Diese Norm enthält keine Anforderungen an die Armaturen. Sie beschränkt sich auf die Leistungsfähigkeit der Schläuche und Schlauchleitungen.
ANMERKUNG 1   Die Schläuche sind für Flüssigkeiten auf Rizinusöl- oder Esterbasis nicht geeignet.
ANMERKUNG 2   Die Schläuche und Schlauchleitungen sollten nicht außerhalb der Grenzen dieser Norm verwendet werden.
ANMERKUNG 3   Anforderungen an Hydraulikschläuche für den untertägigen Bergbau sind in separaten Normen genormt.

Tuyaux et flexibles en caoutchouc - Type hydraulique avec armature de textile - Spécification

La présente Norme européenne spécifie les exigences pour trois types de tuyaux et flexibles à armature tressée de fils textiles, d’alésage nominal de 5 à 100. Ces types sont définis à l’Article 3.
Ils sont destinés à être utilisés avec :
-   les fluides hydrauliques conformes à l'EN ISO 6743-4, à l'exception des HFD R, HFD S et HFD, dans une plage de températures de -40 °C à +100 °C ;
-   les fluides aqueux dans une plage de températures de -40 °C à +70 °C ;
-   l'eau dans une plage de températures de 0 °C à +70 °C.
La Norme européenne ne contient pas d'exigences relatives aux extrémités de raccordement. Elle se limite aux performances des tuyaux et assemblages flexibles.
NOTE 1   Les tuyaux ne conviennent pas pour des utilisations avec des fluides à base d'huile de ricin ou d'ester.
NOTE 2   Il ne convient pas d’utiliser les tuyaux et flexibles en dehors des limites de la présente norme.
NOTE 3   Les exigences pour les tuyaux hydrauliques pour mines souterraines font l'objet de normes séparées.

Gumene cevi in cevni priključki - S tekstilom ojačene hidravlične cevi - Specifikacija

General Information

Status
Published
Publication Date
31-Mar-2015
Withdrawal Date
30-Oct-2015
Current Stage
9093 - Decision to confirm - Review Enquiry
Completion Date
03-Dec-2020

Relations

Buy Standard

Standard
EN 854:2015
English language
18 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 854:2015
01-junij-2015
1DGRPHãþD
SIST EN 854:2000
*XPHQHFHYLLQFHYQLSULNOMXþNL6WHNVWLORPRMDþHQHKLGUDYOLþQHFHYL
6SHFLILNDFLMD
Rubber hoses and hose assemblies - Textile reinforced hydraulic type - Specification
Gummischläuche und -schlauchleitungen - Hydraulikschläuche mit Textileinlage -
Spezifikation
Tuyaux et flexibles en caoutchouc - Type hydraulique avec armature de textile -
Spécification
Ta slovenski standard je istoveten z: EN 854:2015
ICS:
23.040.70 Gumene cevi in armature Hoses and hose assemblies
SIST EN 854:2015 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 854:2015

---------------------- Page: 2 ----------------------

SIST EN 854:2015

EUROPEAN STANDARD
EN 854

NORME EUROPÉENNE

EUROPÄISCHE NORM
April 2015
ICS 23.100.40; 23.040.70 Supersedes EN 854:1996
English Version
Rubber hoses and hose assemblies - Textile reinforced hydraulic
type - Specification
Tuyaux et flexibles en caoutchouc - Type hydraulique avec Gummischläuche und -schlauchleitungen -
armature de textile - Spécification Hydraulikschläuche mit Textileinlage - Spezifikation
This European Standard was approved by CEN on 31 January 2015.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 854:2015 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 854:2015
EN 854:2015 (E)
Contents Page
Foreword .3
1 Scope .4
2 Normative references .4
3 Classification .5
4 Materials and construction .5
4.1 Hoses .5
4.2 Hose assemblies .5
5 Dimensions .5
5.1 Diameters and concentricity .5
5.2 Length .6
5.2.1 Hoses .6
5.2.2 Hose assemblies .7
6 Requirements .7
6.1 Hydrostatic requirements .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.