EN 1870-7:2002+A1:2009
(Main)Safety of woodworking machines - Circular sawing machines - Part 7: Single blade log sawing machines with integrated feed table and manual loading and/or unloading
Safety of woodworking machines - Circular sawing machines - Part 7: Single blade log sawing machines with integrated feed table and manual loading and/or unloading
This document deals with the significant hazards, hazardous situations and events as listed in Clause 4 which are relevant to single blade circular log sawing machines with integrated feed table with manual loading and/or unloading, (hereinafter referred to as machines), designed to cut solid wood.
This European Standard does for Computer Numerically Controlled (CNC) machines not cover the hazards related to Electro-Magnetic Compatibility (EMC).
This European Standard is primarily directed at machines that are manufactured after the date of issue of this European Standard.
Sicherheit von Holzbearbeitungsmaschinen - Kreissägemaschinen - Teil 7: Einblatt-Stammkreissägemaschinen mit mechanischem Tischvorschub und Handbeschickung und/oder Handentnahme
Dieses Dokument behandelt alle im Abschnitt 4 aufgeführten signifikanten Gefährdungen, Gefährdungs-situationen und Gefährdungsereignisse, die auf Einblatt Stammkreissägemaschinen mit mechanischem Tischvorschub und Handbeschickung und/oder Handentnahme zutreffen (im Folgenden als Maschinen bezeichnet), die zum Schneiden von Massivholz konstruiert sind."
Diese Europäische Norm behandelt bei Computer-gesteuerten (CNC) Maschinen nicht die im Zusammenhang mit der elektromagnetischen Verträglichkeit (EMVG) bestehenden Gefährdungen.
!gestrichener Text"
Diese Europäische Norm gilt in erster Linie für Maschinen, die nach dem Ausgabedatum dieser Europäischen Norm hergestellt werden.
Sécurité des machines pour le travail du bois - Machines à scie circulaire - Partie 7 : Scies circulaires monolames à grumes à avance intégrée à table et à chargement manuel et/ou déchargement manuel
!Le présent document traite de tous les phénomènes dangereux, situations et événements dangereux significatifs, tels qu'énumérés dans l'Article 4 qui sont pertinents pour les machines à scier circulaires monolames à grumes à avance intégrée à table et à chargement et/ou déchargement manuel (ci après dénommées «machines»), conçues pour la coupe de bois massif."
La présente norme européenne ne couvre pas les phénomènes dangereux liés à la compatibilité électromagnétique (CEM) pour les machines à commande numérique (CNC).
!texte supprimé"
La présente norme est applicable avant tout aux machines fabriquées après sa date de publication.
Varnost lesnoobdelovalnih strojev - Krožne žage - 7. del: Enolistne žage za razrez hlodov z vgrajeno podajalno mizo in ročnim podajanjem in/ali odvzemom
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.HPRPSicherheit von Holzbearbeitungsmaschinen - Kreissägemaschinen - Teil 7: Einblatt-Stammkreissägemaschinen mit mechanischem Tischvorschub und Handbeschickung und/oder HandentnahmeSécurité des machines pour le travail du bois - Machines à scier circulaires - Partie 7: Scies circulaires monolames à grumes à avance intégrée à table et à chargement manuel et/ou déchargement manuelSafety of woodworking machines - Circular sawing machines - Part 7: Single blade log sawing machines with integrated feed table and manual loading and/or unloading79.120.10Lesnoobdelovalni strojiWoodworking machines25.080.60Strojne žageSawing machinesICS:Ta slovenski standard je istoveten z:EN 1870-7:2002+A1:2009SIST EN 1870-7:2002+A1:2009en01-november-2009SIST EN 1870-7:2002+A1:2009SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 1870-7:2002+A1
September 2009 ICS 79.120.10 Supersedes EN 1870-7:2002English Version
Safety of woodworking machines - Circular sawing machines - Part 7: Single blade log sawing machines with integrated feed table and manual loading and/or unloading
Sécurité des machines pour le travail du bois - Machines à scier circulaires - Partie 7: Scies circulaires monolames à grumes à avance intégrée à table et à chargement manuel et/ou déchargement manuel
Sicherheit von Holzbearbeitungsmaschinen - Kreissägemaschinen - Teil 7: Einblatt-Stammkreissägemaschinen mit mechanischem Tischvorschub und Handbeschickung und/oder Handentnahme This European Standard was approved by CEN on 5 November 2001 and includes Amendment 1 approved by CEN on 30 July 2009.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2009 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1870-7:2002+A1:2009: ESIST EN 1870-7:2002+A1:2009
2 Contents page Foreword . 31 Scope . 52 Normative references . 53 Terms and definitions . 73.1 Terms . 73.2 Definitions . 84
!!!!List of significant hazards"""" . 155 Safety requirements and/or measures . 175.1 Controls . 185.2 Protection against mechanical hazards . 215.3 Protection against non-mechanical hazards . 356 Information for use . 406.1 Warning devices . 406.2 Marking . 406.3 Instruction handbook . 41Annex A (normative)
Saw spindle dimensional tolerances . 45Annex B (normative)
Riving knife mounting Strength test . 46Annex C (normative)
Riving knife lateral stability test . 47Annex D (normative)
Operating conditions for noise emission measurement . 48D.1 Operating conditions . 48D.2 General data sheet . 50Annex ZA (informative)
!!!!Relationship between this European Standard and the Essential Requirements of EU Directive 98/37/EC"""" . 53Annex ZB (informative)
!!!!Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC"""" . 54Bibliography . 55 SIST EN 1870-7:2002+A1:2009
Foreword This document (EN 1870-7:2002+A1:2009) has been prepared by Technical Committee CEN /TC 142, "Woodworking machines - Safety", the secretariat of which is held by UNI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by March 2010, and conflicting national standards shall be withdrawn at the latest by March 2010. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document includes Amendment 1, approved by CEN on 2009-07-30. This document supersedes EN 1870-7:2002. The start and finish of text introduced or altered by amendment is indicated in the text by tags ! ". !This European Standard has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of the Machinery Directive. For relationship with EU Directive(s), see informative Annexes ZA and ZB, which are integral parts of this document." Organisations contributing to the preparation of this European Standard include European Committee of Woodworking Machinery Manufacturers Association "EUMABOIS". Annexes A, B, C and D are normative, the !Annexes ZA and ZB" are informative. !EN 1870 Safety of woodworking machines — Circular sawing machines consists of the following parts: Part 1: Circular saw benches (with and without sliding table), dimension saws and building site saws Part 3: Down cutting cross-cut saws and dual purpose down cutting cross-cut saws/circular saw benches Part 4: Multi-blade rip sawing machines with manual loading and/or unloading Part 5: Circular saw -benches/up-cutting cross-cut sawing machines Part 6: Circular sawing machines for firewood and dual purpose circular sawing machines for firewood/circular saw benches, with manual loading and/or unloading Part 7: Single blade log sawing machines with integrated feed table and manual loading and/or unloading Part 8: Single blade edging circular rip sawing machines with power driven saw unit and manual loading and/or unloading Part 9: Double blade circular sawing machines for cross-cutting with integrated feed and with manual loading and/or unloading Part 10: Single blade automatic and semi-automatic up-cutting cross-cut sawing machines Part 11: Semi-automatic and automatic horizontal cross-cut sawing machines with one saw unit (radial arm saws) SIST EN 1870-7:2002+A1:2009
4 Part 12: Pendulum cross-cut sawing machines Part 13: Horizontal beam panel sawing machines Part 14: Vertical panel sawing machines Part 15: Multi-blade cross-cut sawing machines with integrated feed of the workpiece and manual loading and/or unloading Part 16: Double mitre sawing machines for V-cutting Part 17: Manual horizontal cutting cross-cut sawing machines with one saw unit (manual radial arm saws)" The European Standards produced by CEN/TC142 are particular to woodworking machines and complement the relevant A and B Standards on the subject of general safety (see introduction of
!EN ISO 12100-1:2003" for a description of A, B and C standards). According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. SIST EN 1870-7:2002+A1:2009
0 Introduction This European Standard has been prepared to be a harmonised standard to provide one means of conforming to the essential safety requirements of the Machinery Directive, and associated EFTA regulations. This European Standard is a type "C“ standard as defined in !EN ISO 12100-1:2003". The extent to which hazards are covered is indicated in the scope of this European Standard. The requirements of this European Standard concern designers, manufacturers, suppliers and importers of single blade circular log saw machines with integrated feed and manual loading and/or unloading. This European Standard also includes information to be provided by the manufacturer to the user. Common requirements for tooling are given in EN 847-1.
1 Scope !This document deals with all significant hazards, hazardous situations and events as listed in Clause 4 which are relevant to single blade circular log sawing machines with integrated feed table with manual loading and/or unloading, (hereinafter referred to as machines), designed to cut solid wood." This European Standard does for Computer Numerically Controlled (CNC) machines not cover the hazards related to Electro-Magnetic Compatibility (EMC). !deleted text" This European Standard is primarily directed at machines that are manufactured after the date of issue of this European Standard. 2 Normative references !The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. " !deleted text" !EN 614-1:2006, Safety of machinery — Ergonomic design principles — Part 1: Terminology and general principles" EN 847-1, Tools for woodworking — Safety requirements — Part 1: Milling tools, circular sawblades !EN 894-1:1997, Safety of machinery — Ergonomics requirements for the design of displays and control actuators — Part 1: General principles for human interactions with displays and control actuators EN 894-2:1997, Safety of machinery — Ergonomics requirements for the design of displays and control actuators — Part 2: Displays EN 894-3:2000, Safety of machinery — Ergonomics requirements for the design of displays and control actuators — Part 3: Control actuators" !deleted text" EN 982, Safety of machinery — Safety requirements for fluid power systems and their components — Hydraulics SIST EN 1870-7:2002+A1:2009
6 EN 983, Safety of machinery — Safety requirements for fluid power systems and their components — Pneumatics !EN 1005-1:2001, Safety of machinery — Human physical performance — Part 1: Terms and definitions EN 1005-2:2003, Safety of machinery — Human physical performance — Part 2: Manual handling of machinery and component parts of machinery EN 1005-3:2002, Safety of machinery — Human physical performance — Part 3: Recommended force limits for machinery operation EN 1005-4:2005, Safety of machinery — Human physical performance — Part 4: Evaluation of working postures and movements in relation to machinery EN 1037:1995, Safety of machinery — Prevention of unexpected start-up" !deleted text" EN 1088:1995, Safety of machinery — Interlocking devices associated with guards — Principles for design and selection !EN 50370-1:2005, Electromagnetic compatibility (EMC) — Product family standard for machine-tools —
Part 1: Emission EN 50370-2:2003, Electromagnetic compatibility (EMC) — Product family standard for machine-tools —
Part 2: Immunity" !EN 60204-1:2006", Safety of machinery — Electrical equipment of machines — Part 1: General requirements !(IEC 60204-1:2005, modified) " !EN 60439-1:1999, Low-voltage switchgear and controlgear assemblies — Part 1: Type-tested and partially type-tested assemblies (IEC 60439-1:1999) " EN 60529:1991, Degrees of protection provided by enclosures (IP Code) (IEC 60529:1989) !EN 60825-1:2007, Safety of laser products — Part 1: Equipment classification and requirements (IEC 60825-1:2007)" EN 60947-4-1, !Low-voltage switchgear and controlgear — Part 4-1: Contactors and motor-starters — Electrom
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.