EN 6059-503:2012
(Main)Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 503: Temperature rise due to rated current injected on the sleeve
Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 503: Temperature rise due to rated current injected on the sleeve
This European Standard specifies a method of assessing the behaviour and temperature increase of EMI protection sleeves or conduits subject to permanent and/or fault currents in the shielding.
It shall be used together with EN 3475-100.
Luft- und Raumfahrt - Elektrische Leitungen, Installation - Schutzschläuche - Prüfverfahren - Teil 503: Erwärmung bei Nennstrom eingespeist in den Schlauch
Diese Europäische Norm legt ein Verfahren zur Bewertung des Verhaltens und des Temperaturanstiegs bei EMI-Schutzschläuchen oder -rohren fest, die dauerhaften und/oder fehlerhaften Strömen in der Schirmung ausgesetzt sind.
Sie ist gemeinsam mit EN 3475-100 anzuwenden.
Série aérospatiale - Câbles électriques, installation - Gaines de protection - Méthodes d'essais - Partie 503: Échauffement sous courant nominal injecté sur la gaine
La présente Norme Européenne spécifie une méthode d’évaluation du comportement et d’augmentation de température des gaines de protection EMI ou conduits, soumis à courant permanent et/ou défaut de courant dans le blindage.
Elle doit être utilisée conjointement avec l’EN 3475-100.
Aeronavtika - Električni kabli, namestitev - Zaščitne obojke - Preskusne metode - 503. del: Segrevanje obojke zaradi vnesenega naznačenega toka
Ta evropski standard določa metodo za oceno obnašanja in dviga temperature zaščitnih obojk ali cevi za preprečevanje elektromagnetnih motenj, ki so izpostavljene trajnemu in/ali okvarnemu toku v zaslonu. Uporabljal naj bi se s standardom EN 3475-100.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 6059-503:2012
01-marec-2012
$HURQDYWLND(OHNWULþQLNDEOLQDPHVWLWHY=DãþLWQHRERMNH3UHVNXVQHPHWRGH
GHO 6HJUHYDQMHRERMNH]DUDGLYQHVHQHJDQD]QDþHQHJDWRND
Aerospace series - Electrical cables, installation - Protection sleeves - Test methods -
Part 503: Temperature rise due to rated current injected on the sleeve
Luft- und Raumfahrt - Elektrische Leitungen, Installation - Schutzschläuche -
Prüfverfahren - Teil 503: Erwärmung bei Nennstrom eingespeist in den Schlauch
Série aérospatiale - Câbles électriques, installation - Gaines de protection - Méthodes
d'essais - Partie 503: Échauffement sous courant nominal injecté sur la gaine
Ta slovenski standard je istoveten z: EN 6059-503:2012
ICS:
49.060 /HWDOVNDLQYHVROMVND Aerospace electric
HOHNWULþQDRSUHPDLQVLVWHPL equipment and systems
SIST EN 6059-503:2012 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 6059-503:2012
---------------------- Page: 2 ----------------------
SIST EN 6059-503:2012
EUROPEAN STANDARD
EN 6059-503
NORME EUROPÉENNE
EUROPÄISCHE NORM
January 2012
ICS 49.060
English Version
Aerospace series - Electrical cables, installation - Protection
sleeves - Test methods - Part 503: Temperature rise due to
rated current injected on the sleeve
Série aérospatiale - Câbles électriques, installation - Luft- und Raumfahrt - Elektrische Leitungen, Installation -
Gaines de protection - Méthodes d'essais - Partie 503: Schutzschläuche - Prüfverfahren - Teil 503: Erwärmung bei
Échauffement sous courant nominal injecté sur la gaine Nennstrom eingespeist in den Schlauch
This European Standard was approved by CEN on 27 August 2011.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2012 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 6059-503:2012: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 6059-503:2012
EN 6059-503:2012 (E)
Contents Page
Foreword .3
1 Scope .4
2 Normative references .4
3 Preparation of specimens .4
4 Method .4
5 Requirements .5
2
---------------------- Page: 4 ----------------------
SIST EN 6059-503:2012
EN 6059-503:2012 (E)
Foreword
This document (EN 6059-503:2012) has been prepared by the Aerospace and Defence Industries Association
of Europe - Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this Standard has
received the approval of the National Associations and the Official Services of the member countries of ASD,
prior to its presentation to CEN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by July 2012, and conflicting national standards shall be withdrawn at the
latest by
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.