EN ISO 1833-10:2010

Textiles - Quantitative chemical analysis - Part 10: Mixtures of triacetate or polylactide and certain other fibres (method using dichloromethane) (ISO 1833-10:2006)

ISO 1833-10:2006 specifies a method, using dichloromethane, to determine the percentage of triacetate, after removal of non-fibrous matter, in textiles made of binary mixtures of triacetate or polylactide and wool, regenerated protein, cotton (scoured, kiered, or bleached), viscose, cupro, modal, polyamide, polyester, acrylic and glass fibres.
Triacetate fibres which have received a finish leading to partial hydrolysis cease to be completely soluble in the reagent. In such cases, this method is not applicable.

Textilien - Quantitative chemische Analysen - Teil 10: Mischungen aus Triacetat- oder Polylactidfasern und bestimmten anderen Fasern (Dichlormethan-Verfahren) (ISO 1833-10:2006)

Dieser Teil von ISO 1833 legt ein Dichlormethan Verfahren zur Bestimmung des prozentualen Anteils an Triacetat, nach dem Abtrennen der nichtfaserigen Begleitstoffe, in Textilien aus binären Fasermischungen aus
-   Triacetat  oder Polylactidfasern
und
-   Wolle, regenerierter Proteinfaser, Baumwolle (entschlichtet, gebeucht oder gebleicht), Viskose, Cupro, Modal, Polyamid, Polyester, Polyacryl und Glasfaser
fest.
Triacetatfasern, die eine Ausrüstung erhalten haben, die zu einer partiellen Hydrolyse führt, sind in dem Reagenz nicht mehr vollständig löslich. In diesen Fällen ist dieses Verfahren nicht anwendbar.

Textiles - Analyse chimique quantitative - Partie 10: Mélanges de triacétate ou de polylactide et de certaines autres fibres (méthode au dichlorométhane) (ISO 1833-10:2006)

L'ISO 1833-10:2006 spécifie une méthode de détermination, au dichlorométhane, du pourcentage de triacétate, après élimination des matières non fibreuses, dans les textiles composés de mélanges binaires de triacétate ou polylactide et de laine, protéines régénérées, coton (lavé, débouilli ou blanchi), viscose, cupro, modal, polyamide, polyester, acrylique et fibres de verre.
Les fibres de triacétate qui ont reçu un traitement d'apprêt conduisant à une hydrolyse partielle ne sont plus entièrement solubles dans le réactif. Dans ce cas, la présente méthode ne s'applique pas.

Tekstilije - Kvantitativna kemična analiza - 10. del: Mešanica triacetatnih ali polilaktidnih in nekaterih drugih vlaken (metoda z uporabo diklorometana) (ISO 1833-10:2006)

Ta del standarda ISO 1833 določa metodo z uporabo diklormetana za ugotavljanje odstotne vrednosti triacetata po odstranitvi nevlakenske snovi v tekstilijah iz dvokomponentnih mešanic - triacetata in polilaktida in - volne, regeneriranih proteinskih vlaken, bombaža (izkuhanega, razškrobljenega ali beljenega), viskoze, kupro vlaken, modalnih vlaken, poliamidnih, poliestrskih, akrilnih in steklenih vlaken. Triacetatna vlakna z apreturo, ki je povzročila delno hidrolizo, niso več popolnoma topna v reagentu. V takih primerih se ta metoda ne uporablja.

General Information

• Status: Withdrawn
• Publication Date: 12-Oct-2010
• Withdrawal Date: 14-May-2019
• ICS: 59.060.01 - Textile fibres in general
• ICS: 59.060.20 - Man-made fibres
• Technical Committee: CEN/TC 248 - Textiles and textile products
• Drafting Committee: CEN/TC 248 - Textiles and textile products
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 15-May-2019
• Ref Project: SIST EN ISO 1833-10:2013 - Textiles - Quantitative chemical analysis - Part 10: Mixtures of triacetate or polylactide and certain other fibres (method using dichloromethane) (ISO 1833-10:2006)

Relations

• Replaced By: EN ISO 1833-10:2019 - Textiles - Quantitative chemical analysis - Part 10: Mixtures of triacetate or polylactide with certain other fibres (method using dichloromethane) (ISO 1833-10:2019)
• Effective Date: 08-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
01-september-2013
7HNVWLOLMH.YDQWLWDWLYQDNHPLþQDDQDOL]DGHO0HãDQLFDWULDFHWDWQLKDOL
SROLODNWLGQLKLQQHNDWHULKGUXJLKYODNHQPHWRGD]XSRUDERGLNORURPHWDQD,62

Textiles - Quantitative chemical analysis - Part 10: Mixtures of triacetate or polylactide
and certain other fibres (method using dichloromethane) (ISO 1833-10:2006)
Textilien - Quantitative chemische Analysen - Teil 10: Mischungen aus Triacetat- oder
Polylactidfasern und bestimmten anderen Fasern (Dichlormethan-Verfahren) (ISO 1833-
10:2006)
Textiles - Analyse chimique quantitative - Partie 10: Mélanges de triacétate ou de
polylactide et de certaines autres fibres (méthode au dichlorométhane) (ISO 1833-
10:2006)
Ta slovenski standard je istoveten z: EN ISO 1833-10:2010
ICS:
59.060.20 Umetna vlakna Man-made fibres
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN ISO 1833-10
NORME EUROPÉENNE
EUROPÄISCHE NORM
October 2010
ICS 59.060.20
English Version
Textiles - Quantitative chemical analysis - Part 10: Mixtures of
triacetate or polylactide and certain other fibres (method using
dichloromethane) (ISO 1833-10:2006)
Textiles - Analyse chimique quantitative - Partie 10: Textilien - Quantitative chemische Analysen - Teil 10:
Mélanges de triacétate ou de polylactide et de certaines Mischungen aus Triacetat- oder Polylactidfasern und
autres fibres (méthode au dichlorométhane) (ISO 1833- bestimmten anderen Fasern (Dichlormethan-Verfahren)
10:2006) (ISO 1833-10:2006)
This European Standard was approved by CEN on 12 September 2010.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2010 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 1833-10:2010: E
worldwide for CEN national Members.

Contents Page
Foreword .3

Foreword
The text of ISO 1833-10:2006 has been prepared by Technical Committee ISO/TC 38 “Textiles” of the
International Organization for Standardization (ISO) and has been taken over as EN ISO 1833-10:2010 by
Technical Committee CEN/TC 248 “Textiles and textile products”, the secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by April 2011, and conflicting national standards shall be withdrawn at the
latest by April 2011.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 1833-10:2006 has been approved by CEN as EN ISO 1833-10:2010 without any modification.

INTERNATIONAL ISO
STANDARD 1833-10
First edition
2006-06-01
Textiles — Quantitative chemical
analysis —
Part 10:
Mixtures of triacetate or polylactide and
certain other fibres (method using
dichloromethane)
Textiles — Analyse chimique quantitative —
Partie 10: Mélanges de triacétate ou de polylactide et de certaines
autres fibres (méthode au dichlorométhane)

Reference number
ISO 1833-10:2006(E)
©
ISO 2006
ISO 1833-10:2006(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.

©  ISO 2006
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Published in Switzerland
ii © ISO 2006 – All rights reserved

ISO 1833-10:2006(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right
...