prEN 3488

Aerospace series - Steel X6CrNiTi18-10 (1.4541) - Air melted - Softened - Sheets and strips - a ≤ 6 mm - 500 MPa ≤ Rm ≤ 700 MPa

This document specifies the requirements relating to:
Steel X6CrNiTi18-10 (1.4541)
Air melted
Softened
Sheets and strips
a ≤ 6 mm
500 MPa ≤ Rm ≤ 700 MPa
for aerospace applications.
W. nr: 1.4541.
ASD-STAN designation: FE-PA3601.

Luft- und Raumfahrt - Stahl X6CrNiTi18-10 (1.4541) - Lufterschmolzen - Weichgeglüht - Bleche und Bänder - a ≤ 6 mm - 500 MPa ≤ Rm ≤ 700 MPa

No Scope available

Série aérospatiale - Acier X6CrNiTi18-10 (1.4541) - Élaboré à l'air - Adouci - Tôles et bandes - a ≤ 6 mm - 500 MPa ≤ Rm ≤ 700 MPa

Le présent document spécifie les exigences relatives à :
Acier X6CrNiTi18-10 (1.4541)
Élaboré à l’air
Adouci
Tôles et bandes
a ≤ 6 mm
500 MPa ≤ Rm ≤ 700 MPa
pour applications aérospatiales.
W.nr : 1.4541.
Désignation ASD-STAN : FE-PA3601.

Aeronavtika - Jeklo X6CrNiTi18-10 (1.4541) - Taljeno na zraku - Popuščano - Pločevina in trakovi - a <= 6 mm - 500 MPa <= Rm <= 700 MPa

General Information

• Status: Not Published
• Publication Date: 13-Jun-2022
• Withdrawal Date: 13-Sep-2022
• ICS: 49.025.10 - Steels
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 4/S 3 - Steels & Heat Resisting Alloys
• Current Stage: 4599 - Dispatch of FV draft to CMC - Finalization for Vote
• Start Date: 03-Jan-2024
• Completion Date: 03-Jan-2024
• Ref Project: oSIST prEN 3488:2020 - Aerospace series - Steel X6CrNiTi18-10 (1.4541) - Air melted - Softened - Sheets and strips - a ≤ 6 mm - 500 MPa ≤ Rm ≤ 700 MPa

Relations

• Revises: EN 3488:2007 - Aerospace series - Steel FE-PA3601 (X6CrNiTi18-10) - Air melted - Softened - Sheet and strip - a ≤ 6 mm - 500 MPa ≤ Rm ≤ 700 MPa
• Effective Date: 11-Dec-2018

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 3488:2020
01-november-2020
Aeronavtika - Jeklo X6CrNiTi18-10 (1.4541) - Taljeno na zraku - Popuščano -
Pločevina in trakovi - a <= 6 mm - 500 MPa <= Rm <= 700 MPa
Aerospace series - Steel X6CrNiTi18-10 (1.4541) - Air melted - Softened - Sheets and
strips - a ≤ 6 mm - 500 MPa ≤ Rm ≤ 700 MPa
Luft- und Raumfahrt - Stahl X6CrNiTi18-10 (1.4541) - Lufterschmolzen - Weichgeglüht -
Bleche und Bänder - a ≤ 6 mm - 500 MPa ≤ Rm ≤ 700 MPa
Série aérospatiale - Acier X6CrNiTi18-10 (1.4541) - Élaboré à l'air - Adouci - Tôles et
bandes - a ≤ 6 mm - 500 MPa ≤ Rm ≤ 700 MPa
Ta slovenski standard je istoveten z: prEN 3488
ICS:
49.025.10 Jekla Steels
77.140.50 Ploščati jekleni izdelki in Flat steel products and semi-
polizdelki products
oSIST prEN 3488:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 3488:2020

---------------------- Page: 2 ----------------------
oSIST prEN 3488:2020


DRAFT
EUROPEAN STANDARD
prEN 3488
NORME EUROPÉENNE

EUROPÄISCHE NORM

September 2020
ICS 49.025.10 Will supersede EN 3488:2007
English Version

Aerospace series - Steel X6CrNiTi18-10 (1.4541) - Air
melted - Softened - Sheets and strips - a ≤ 6 mm - 500 MPa
≤ Rm ≤ 700 MPa
Série aérospatiale - Acier X6CrNiTi18-10 (1.4541) - Luft- und Raumfahrt - Stahl X6CrNiTi18-10 (1.4541) -
Lufterschmolzen - Weichgeglüht - Bleche und Bänder -
Élaboré à l'air - Adouci - Tôles et bandes - a ≤ 6 mm -
a ≤ 6 mm - 500 MPa ≤ Rm ≤ 700 MPa
500 MPa ≤ Rm ≤ 700 MPa
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee ASD-
STAN.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 3488:2020 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 3488:2020
prEN 3488:2020 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Requirements . 5
Bibliography . 9

2

---------------------- Page: 4 ----------------------
oSIST prEN 3488:2020
prEN 3488:2020 (E)
European foreword
This document (prEN 3488:2020) has been prepared by the Aerospace and Defence Industries Association of
Europe — Standardization (ASD-STAN).
Af
...