iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

prEN 4734-101

(Main)

Aerospace series - Mechanical transfer contact, fibre optic contact Multi connectors - Part 101: MT male contact 12 ways - Technical specification

Aerospace series - Mechanical transfer contact, fibre optic contact Multi connectors - Part 101: MT male contact 12 ways - Technical specification

This document specifies the performance and dimensions of MT male contact 12 ways for prEN 4733 001 connector specification.

Luft- und Raumfahrt - Haupt-Element - Teil 101: Technische Lieferbedingungen

Série aérospatiale - Contact à transfert mécanique, connecteurs à contact à fibre optique multivoies - Partie 101 : Contact MT mâle 12 voies - Spécification technique

Le présent document spécifie les performances et les dimensions d’un contact MT mâle 12 voies pour la spécification d’un connecteur EN 4733-001.

Aeronavtika - Mehanski prenosni kontakt, optični kontakt - Multi konektorji - 101. del: MT moški 12-polni kontakt - Tehnična specifikacija

General Information

Status
Not Published
Publication Date
25-May-2025
ICS
49.090 - On-board equipment and instruments
Technical Committee
ASD-STAN - Aerospace
Drafting Committee
ASD-STAN/D 2/S 10 - Optical
Current Stage
4060 - Closure of enquiry - Enquiry
Start Date
22-Feb-2024
Completion Date
22-Feb-2024
Ref Project
oSIST prEN 4734-101:2024 - Aerospace series - Mechanical transfer contact, fibre optic contact Multi connectors - Part 101: MT male contact 12 ways - Technical specification

Buy Standard

prEN 4734-101:2024prEN 4734-101:2024
PreviousNext
Draft
prEN 4734-101:2024
English language
14 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 4734-101:2024
01-maj-2024
Aeronavtika - Mehanski prenosni kontakt, optični kontakt - Multi konektorji - 101.
del: MT moški 12-polni kontakt - Tehnična specifikacija
Aerospace series - Mechanical transfer contact, fibre optic contact Multi connectors -
Part 101: MT male contact 12 ways - Technical specification
Luft- und Raumfahrt - Haupt-Element - Teil 101: Technische Lieferbedingungen
Série aérospatiale - Contact à transfert mécanique, connecteurs à contact à fibre optique
multivoies - Partie 101 : Contact MT mâle 12 voies - Spécification technique
Ta slovenski standard je istoveten z: prEN 4734-101
ICS:
49.060 Letalska in vesoljska Aerospace electric
električna oprema in sistemi equipment and systems
oSIST prEN 4734-101:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 4734-101:2024

---------------------- Page: 2 ----------------------
oSIST prEN 4734-101:2024


DRAFT
EUROPEAN STANDARD
prEN 4734-101
NORME EUROPÉENNE

EUROPÄISCHE NORM

November 2023
ICS 49.090
English Version

Aerospace series - Mechanical transfer contact, fibre optic
contact Multi connectors - Part 101: MT male contact 12
ways - Technical specification
Aerospace séries - Contact fibre optique multivoies - Luft- und Raumfahrt - Haupt-Element - Teil 101:
Partie 101 : Contact MT male 12 fibres - Spécification Technische Lieferbedingungen
technique
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee ASD-
STAN.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 4734-101:2023 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 4734-101:2024
prEN 4734-101:2023 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Fibre optic contact and definition . 4
4.1 Contact composition . 4
4.2 Contact dimensions and mass . 6
4.3 Polarization keys . 7
4.4 Mated contact force . 7
4.5 Alignment .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 3375-009:2023(Main)
Aerospace series - Cable, electrical, for digital data transmission - Part 009: Single braid - CAN Bus - 120 ohms - Type WX - Product standard
SIST EN 3375-009:2023

This document specifies the required characteristics of single braid, 120 ohms, size 26, electrical cable type WX, UV laser markable, intended for digital data transmissions.
It is used together with EN 3375 001.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 2591-509:2023(Main)
Aerospace series - Elements of electrical and optical connection - Test methods - Part 509: Adhesion of coating on contacts
SIST EN 2591-509:2023

This document specifies methods of verifying adhesion of electrodeposited gold and gold alloy coatings on contacts.

  • Standard
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 2591-508:2023(Main)
Aerospace series - Elements of electrical and optical connection - Test methods - Part 508: Measurement of thickness of coating on contacts
SIST EN 2591-508:2023

This document specifies methods of measuring thickness of electro-deposited gold or gold alloys coatings on contacts of elements of connection.

  • Standard
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 3375-011:2022(Main)
Aerospace series - Cable, electrical for digital data transmission - Part 011: Single braid - Star Quad 100 ohms - Lightweight - Type KL - Product standard
SIST EN 3375-011:2023

This document specifies the dimensions, tolerances, required characteristics and the mass of an AWG 24 shielded quad cable, type KL, intended for high speed (100 Mbit/s) full duplex Ethernet networks.
Linked to this particular application, the operating temperatures of the cable are between −65 °C and 125 °C.
This cable is laser markable, this marking satisfies the requirements of EN 3838.
The impedance is 100 Ω ± 15 Ω.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 3375-001:2022(Main)
Aerospace series - Cable, electrical, for digital data transmission - Part 001: Technical specification
SIST EN 3375-001:2022

This document specifies the required characteristics, test methods, qualification and acceptance conditions of signal data transmission electrical cables.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 3745-412:2022(Main)
Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 412: Humidity resistance
SIST EN 3745-412:2022

This document evaluates the resistance of the fiber optic cable to humidity changes at different
temperatures.

  • Standard
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 4641-301:2022(Main)
Aerospace series - Cables, optical 125 μm diameter cladding - Part 301: Tight structure 50/125 μm GI, fibre nominal 1,8 mm, outside diameter - Product standard
SIST EN 4641-301:2022

This document specifies the general characteristics, conditions for qualification, acceptance and quality assurance for a fibre optic cable with a 50/125 μm Graded Index fibre core, 1,8 mm outside diameter for non pull-proof contact designs.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 4533-001:2020(Main)
Aerospace series - Fibre optic systems - Handbook - Part 001: Termination methods and tools
SIST EN 4533-001:2020

1.1   General
Part 001 of EN 4533 examines the termination of optical fibre cables used in aerospace applications. Termination is the act of installing an optical terminus onto the end of a buffered fibre or fibre optic cable. It encompasses several sequential procedures or practices. Although termini will have specific termination procedures, many share common elements and these are discussed in this document. Termination is required to form an optical link between any two network or system components or to join fibre optic links together.
The fibre optic terminus features a precision ferrule with a tight tolerance central bore hole to accommodate the optical fibre (suitably bonded in place and highly polished). Accurate alignment with another (mating) terminus will be provided within the interconnect (or connector) alignment mechanism. As well as single fibre ferrules, it is noted that multi-fibre ferrules exist (e.g. the MT ferrule) and these will also be discussed in this part of the handbook.
Another technology used to connect 2 fibres is the expanded beam. 2 ball lenses are used to expand, collimate and then refocus the light from and to fibres. Contacts are not mated together. It helps reducing the wear between 2 contacts and allows more mating cycles. This technology is less sensitive to misalignments and dust. Losses are remaining more stable than butt joint contact even if the nominal loss is higher.
A Note on Terminology
Current terminology in the aerospace fibre optics community refers to an optical terminus or termini. The term optical contact may be seen in some documents and has a similar meaning. However, the term contact is now generally reserved for electrical interconnection pins. The optical terminus (or termini) is housed within an interconnect (connector is an equivalent term). Interconnects can be single-way or multi-way. The interconnect or connector will generally house the alignment mechanism for the optical termini (usually a precision split-C sleeve made of ceramic or metal). The reader should be aware of these different terms.
An optical link can be classified as a length of fibre optic cable terminated at both ends with fibre optic termini. The optical link provides the transmission line between any two components via the optical termini which are typically housed within an interconnecting device (typically a connector) with tight tolerancing within the alignment mechanisms to ensure a low loss light transmission.
Part 001 will explain the need for high integrity terminations, provide an insight into component selection issues and suggests best practice when terminating fibres into termini for high integrity applications. A detailed review of the termination process can be found in section 4 of this part and is organised in line with the sequence of a typical termination procedure.
The vast number of cable constructions and connectors available make defining a single termination instruction that is applicable to all combinations very difficult. Therefore, this handbook concentrates on the common features of most termination practices and defining best practice for current to near future applications of fibre optics on aircraft. This has limited the studies within this part to currently available ‘avionic’ silica fibre cables and adhesive filled butt-coupled type connectors. Many of the principles described however would still be applicable for other termination techniques. Other types of termination are considered further in the repair part of this handbook.
It is noted that the adhesive based pot-and-polish process is applicable to the majority of single-way fibre optic interconnects connectors and termini for multi-way interconnects and connectors. They share this commonality.
1.2   Need to high integrity terminations
(...)

  • Standard
    113 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 3745-404:2019(Main)
Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 404: Thermal shock
SIST EN 3745-404:2019

This document specifies a method to determine the effects of thermal shock on an optical fibre or cable.

  • Standard
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 4660-005:2019(Main)
Aerospace series - Modular and Open Avionics Architectures - Part 005: Software
SIST EN 4660-005:2019

This European Standard establishes uniform requirements for design and development of software
architecture for modular avionics systems.

  • Standard
    321 pages
    English language
    sale 10% off
    e-Library read for
    1 day