EN ISO 12460-3:2020/prA1

Wood-based panels - Determination of formaldehyde release - Part 3: Gas analysis method - Amendment 1: Laser spectroscopy (ISO 12460-3:2020/DAM 1:2022)

This document specifies a procedure for determination of accelerated formaldehyde release from uncoated and coated wood-based panels using the gas analysis method. The procedure is also suitable for the testing of other materials (e.g. edge bands, floor coverings, foams, foils, laminated wood products, veneered wood products, coated wood products).

Holzwerkstoffe - Bestimmung der Formaldehydabgabe - Teil 3: Gasanalyse-Verfahren - Änderung 1: Lasersprektroskopie (ISO 12460-3:2020/DAM 1:2022)

Dieses Dokument legt ein Verfahren zur Bestimmung der beschleunigten Formaldehydabgabe von beschichteten und unbeschichteten Holzwerkstoffen mithilfe des Gasanalyse-Verfahrens fest. Das Verfahren ist auch zur Prüfung anderer Werkstoffe (z. B. Kantenstreifen, Fußbodenbeläge, Schäume, Folien, schichtverklebte Holzprodukte, furnierte Holzprodukte, beschichtete Holzprodukte) geeignet.

Panneaux à base de bois - Détermination du dégagement de formaldéhyde - Partie 3: Méthode d'analyse de gaz - Amendement 1: Spectroscopie laser (ISO 12460-3:2020/DAM 1:2022)

La présent document spécifie une procédure pour la détermination du dégagement accéléré de formaldéhyde sur des panneaux à base de bois revêtus et non revêtus, selon la méthode d'analyse de gaz. La procédure est aussi adaptée aux essais d'autres matériaux (par exemple bandes de chant, revêtements de sol, mousses, feuilles de papier décor, produits en bois mélaminés, produits avec placages en bois, produits en bois revêtus).

Lesne plošče - Ugotavljanje sproščanja formaldehida - 3. del: Metoda plinske analize - Dopolnilo A1: Laserska spektroskopija (ISO 12460-3:2020/DAM 1:2022)

General Information

• Status: Not Published
• Publication Date: 07-Apr-2024
• ICS: 79.060.01 - Wood-based panels in general
• Technical Committee: CEN/TC 112 - Woodbased panels
• Drafting Committee: CEN/TC 112/WG 5 - Regulated dangerous substances
• Ref Project: SIST EN ISO 12460-3:2020/oprA1:2022 - Wood-based panels - Determination of formaldehyde release - Part 3: Gas analysis method - Amendment 1: Laser spectroscopy (ISO 12460-3:2020/DAM 1:2022)

Relations

• Amends: EN ISO 12460-3:2020 - Wood-based panels - Determination of formaldehyde release - Part 3: Gas analysis method (ISO 12460-3:2020)
• Effective Date: 20-Apr-2022

Standards Content (Sample)

SLOVENSKI STANDARD
01-november-2022
Lesne plošče - Ugotavljanje sproščanja formaldehida - 3. del: Metoda plinske
analize - Dopolnilo A1: Laserska spektroskopija (ISO 12460-3:2020/DAM 1:2022)
Wood-based panels - Determination of formaldehyde release - Part 3: Gas analysis
method - Amendment 1: Laser spectroscopy (ISO 12460-3:2020/DAM 1:2022)
Holzwerkstoffe - Bestimmung der Formaldehydabgabe - Teil 3: Gasanalyse-Verfahren -
Änderung 1: Lasersprektroskopie (ISO 12460-3:2020/DAM 1:2022)
Panneaux à base de bois - Détermination du dégagement de formaldéhyde - Partie 3:
Méthode d'analyse de gaz - Amendement 1: Spectroscopie laser (ISO 12460-
3:2020/DAM 1:2022)
Ta slovenski standard je istoveten z: EN ISO 12460-3:2020/prA1
ICS:
79.060.01 Lesne plošče na splošno Wood-based panels in
general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

DRAFT AMENDMENT
ISO 12460-3:2020/DAM 1
ISO/TC 89 Secretariat: DIN
Voting begins on: Voting terminates on:
2022-09-12 2022-12-05
Wood-based panels — Determination of formaldehyde
release —
Part 3:
Gas analysis method
AMENDMENT 1: Laser spectroscopy
Panneaux à base de bois — Détermination du dégagement de formaldéhyde —
Partie 3: Méthode d'analyse de gaz
AMENDEMENT 1
ICS: 79.060.01
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO 12460-3:2020/DAM 1:2022(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2022

ISO 12460-3:2020/DAM 1:2022(E)
DRAFT AMENDMENT
ISO 12460-3:2020/DAM 1
ISO/TC 89 Secretariat: DIN
Voting begins on: Voting terminates on:

Wood-based panels — Determination of formaldehyde
release —
Part 3:
Gas analysis method
AMENDMENT 1: Laser spectroscopy
Panneaux à base de bois — Détermination du dégagement de formaldéhyde —
Partie 3: Méthode d'analyse de gaz
AMENDEMENT 1
ICS: 79.060.01
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
© ISO 2022
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
NOT BE REFERRED TO AS AN INTERNATIONAL
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on STANDARD UNTIL PUBLISHED AS SUCH.
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
IN ADDITION TO THEIR EVALUATION AS
or ISO’s member body in the country of the requester. BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
ISO copyright office
USER PURPOSES, DRAFT INTERNATIONAL
CP 401 • Ch. de Blandonnet 8
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
CH-1214 Vernier, Geneva
POTENTIAL TO BECOME STANDARDS TO
Phone: [phone]
WHICH REFERENCE MAY BE MADE IN
Reference number
Email: [e-mail]
NATIONAL REGULATIONS.
Website: www.iso.org ISO 12460-3:2020/DAM 1:2022(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
Published in Switzerland
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
ii
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2022

ISO 12460-3:2020/DAM 1:2022(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO
...