Grouts for ceramic tiles - Part 1: Requirements, classification, designation, marking and labelling

This document is applicable to ceramic tile grouts for internal and external tile installations on walls and floors.
This document gives the terminology concerning the products, working methods (see Annex A), application properties, etc. for ceramic tile grouts.
This document specifies the performance requirements for cementitious and reaction resin grouts for ceramic tiles.
This document does not contain criteria or recommendations for the design and installation of ceramic tiles.
Ceramic tile grouts can also be used for other types of tiles (natural and agglomerated stones, etc.), where these do not adversely affect these materials.

Fugenmörtel für Fliesen und Platten - Teil 1: Anforderungen, Klassifizierung, Bezeichnung und Kennzeichnung

Das vorliegende Dokument ist anwendbar auf Fugenmörtel für keramische Fliesen und Platten an Wänden und Böden im Innen- und Außenbereich.
Dieses Dokument enthält die Terminologie zu Produkten, Arbeitsverfahren (siehe Anhang A), Verarbeitungs¬eigenschaften usw. für Fugenmörtel für keramische Fliesen und Platten.
In diesem Dokument werden die Leistungsanforderungen an zementhaltige Mörtel und Reaktionsharz-Fugenmörtel für Fliesen und Platten festgelegt.
Dieses Dokument enthält keine Kriterien oder Empfehlungen für die Formgestaltung und Verlegung von keramischen Fliesen und Platten.
Fugenmörtel für keramische Fliesen und Platten können auch für andere Arten von Fliesen und Platten (aus Natur- und Betonwerkstein usw.) verwendet werden, sofern sie auf diese Materialien keine negativen Einflüsse ausüben.

Mortiers de jointoiement pour carreaux et dalles céramiques - Partie 1 : Exigences, classification, désignation, marquage et étiquetage

Le présent document s’applique à tous les mortiers de jointoiement pour carreaux et dalles céramiques destinés à la pose de carrelages intérieurs et extérieurs sur des murs et des sols.
La présente norme donne la terminologie applicable aux produits, aux méthodes de travail (voir Annexe A), aux propriétés d'application, etc., pour les mortiers de jointoiement.
Le présent document prescrit les exigences de performances relatives aux mortiers de jointoiement pour carreaux et dalles céramiques (mortiers de jointoiement à base de ciment ou de résine réactive).
Le présent document ne contient pas de spécifications ou de recommandations pour la conception et l'installation de revêtements céramiques.
Les mortiers de jointoiement pour carreaux et dalles céramiques peuvent également être utilisés pour d’autres types de carrelages (pierres naturelles et reconstituées, etc.) s'ils sont compatibles avec ces matériaux.

Fugirne mase za keramične ploščice - 1. del: Zahteve, klasifikacija, označba, označevanje in etiketiranje

General Information

Status
Not Published
Current Stage
6055 - CEN Ratification completed (DOR) - Publishing
Due Date
13-Sep-2021

RELATIONS

Buy Standard

Draft
prEN 13888-1:2021
English language
12 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (sample)

SLOVENSKI STANDARD
oSIST prEN 13888-1:2021
01-september-2021
Fugirne mase za keramične ploščice - 1. del: Zahteve, klasifikacija, označba,
označevanje in etiketiranje

Grouts for ceramic tiles - Part 1: Requirements, classification, designation, marking and

labelling
Fugenmörtel für Fliesen und Platten - Teil 1: Anforderungen, Klassifizierung,
Bezeichnung und Kennzeichnung

Mortiers de jointoiement pour carreaux et dalles céramiques - Partie 1 : Exigences,

classification, désignation, marquage et étiquetage
Ta slovenski standard je istoveten z: prEN 13888-1
ICS:
01.040.91 Gradbeni materiali in gradnja Construction materials and
(Slovarji) building (Vocabularies)
91.100.10 Cement. Mavec. Apno. Malta Cement. Gypsum. Lime.
Mortar
oSIST prEN 13888-1:2021 en,fr,de

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 13888-1:2021
---------------------- Page: 2 ----------------------
oSIST prEN 13888-1:2021
DRAFT
EUROPEAN STANDARD
prEN 13888-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2021
ICS 01.040.91; 91.100.10 Will supersede EN 13888:2009
English Version
Grouts for ceramic tiles - Part 1: Requirements,
classification, designation, marking and labelling

Mortiers de jointoiement pour carreaux et dalles Fugenmörtel für Fliesen und Platten - Teil 1:

céramiques - Partie 1 : Exigences, classification, Anforderungen, Klassifizierung, Bezeichnung und

désignation, marquage et étiquetage Kennzeichnung

This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee

CEN/TC 67.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations

which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other

language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC

Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,

Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,

Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and

United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are

aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without

notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels

© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 13888-1:2021 E

worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 13888-1:2021
prEN 13888-1:2021 (E)
Contents Page

European foreword ...................................................................................................................................................... 3

Introduction .................................................................................................................................................................... 4

1 Scope .................................................................................................................................................................... 5

2 Normative references .................................................................................................................................... 5

3 Terms and definitions ................................................................................................................................... 5

3.1 General................................................................................................................................................................ 5

3.2 Products ............................................................................................................................................................. 5

3.3 Application properties .................................................................................................................................. 6

3.4 Final properties ............................................................................................................................................... 6

3.5 Characteristics ................................................................................................................................................. 7

4 Product characteristics ................................................................................................................................. 7

4.1 Cementitious grouts (CG) ............................................................................................................................. 7

4.2 Reaction resin grouts (RG) .......................................................................................................................... 8

5 Classification and designation ................................................................................................................... 9

6 Marking and labelling ................................................................................................................................. 10

Annex A (informative) Tools and working methods ....................................................................................... 11

Bibliography ................................................................................................................................................................. 12

---------------------- Page: 4 ----------------------
oSIST prEN 13888-1:2021
prEN 13888-1:2021 (E)
European foreword

This document (prEN 13888-1:2021) has been prepared by Technical Committee CEN/TC 67 “Ceramic

tiles”, the secretariat of which is held by UNI.
This document is currently submitted to the CEN Enquiry.
This document will supersede EN 13888:2009.

The significant changes between this document and the previous edition are listed herewith:

— Clause 2 Normative references;
— Clause 3 Terms and definitions;
— Clause 4 Specifications;
— Clause 5 Evaluation of conformity of the previous edition has been deleted;
— Clause 5 Classification and designation (Clause 6 of the previous edition).

This document belongs to series prEN 13888, Grouts for ceramic tiles, which consists of the following

parts:
— Part 1: Requirements, classification, designation, marking and labelling;
— Part 2: Test methods.
---------------------- Page: 5 ----------------------
oSIST prEN 13888-1:2021
prEN 13888-1:2021 (E)
Introduction

The characteristics of the construction products defined in this document take into consideration that

the normal stresses due to the works for which they are intended, assembled or installed, can be

properly accommodated. Some special characteristics will take into account the type of substrate and

that the grouts should resist the degrading actions of climate, environment, etc.

Many properties of grouts for ceramic tiles are mainly determined by the type of binders used.

Tile grouts are defined in different types depending on the chemical nature of their binders.

The different types have specific characteristics in terms of application properties and final

performance.

The relationship between characteristics and the working conditions (dry or humid conditions, hot

climate, fast setting, etc.) is not given in this document.

The manufacturer gives information about the use of the product and the correct conditions of use.

The specifier evaluates the state of the job site (mechanical, thermal and chemical influences) and

chooses the appropriate product considering all the possible risks.
---------------------- Page: 6 ----------------------
oSIST prEN 13888-1:2021
prEN 13888-1:2021 (E)
1 Scope

This document is applicable to ceramic tile grouts for internal and external tile installations on walls

and floors.

This document gives the terminology concerning the products, working methods (see Annex A),

application properties, etc. for ceramic tile grouts.

This document specifies the performance requirements for cementitious and reaction resin grouts for

ceramic tiles.

This document does not contain criteria or recommendations for the design and installation of ceramic

tiles.

Ceramic tile grouts can also be used for other types of tiles (natural and agglomerated stones, etc.),

where these do not adversely affect these materials.
2 Normative references

The following documents are referred to in the text in such a way that some or all of their content

constitutes requirements of this document. For dated references, only the edition cited applies. For

undated references, the latest edition of the referenced document (including any amendments) applies.

prEN 13888-2:2021, Grouts for ceramic tiles – Part 2: Test methods
3 Terms and definitions
For the purposes of this docume
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.