CEN/TS 16360:2021

Paints and varnishes - Coating materials and coating systems for exterior wood - Assessment of film extensibility by indentation of a coating on a wooden substrate

This document specifies a test method for assessing film extensibility by indentation of a coating on a defined and carefully selected wooden extensibility substrate for coatings on stable wood components in exterior use. The method is preferably be used on coatings that have not been exposed to weathering.

Beschichtungsstoffe - Beschichtungsstoffe und Beschichtungssysteme für Holz im Außenbereich - Beurteilung der Verformbarkeit durch Eindrücken einer Beschichtung auf einem Holzsubstrat

Dieses Dokument legt ein Prüfverfahren zum Beurteilen der Verformbarkeit durch Eindrücken einer Beschichtung auf einem definierten und sorgfältig ausgewählten Holzsubstrat für Beschichtungen auf maßhaltigen Holzbauteilen im Außenbereich fest. Das Verfahren wird vorzugsweise für Beschichtungen verwendet, die nicht bewittert wurden.

Peintures et vernis - Produits de peinture et systèmes de peinture pour bois en extérieur - Évaluation de l'extensibilité du feuil par poinçonnement d'un revêtement sur un support en bois

Le présent document spécifie une méthode d’essai pour évaluer l’extensibilité du feuil par poinçonnement d’un revêtement sur un subjectile en bois défini et choisi avec soin, pour des revêtements sur des éléments de bois stable, pour usage en extérieur. Il est préférable d'appliquer la méthode à des revêtements n’ayant pas été exposés aux intempéries.

Barve in laki - Premazi in premazni sistemi za zaščito lesa za zunanjo uporabo - Ocenjevanje razteznosti filma z vtiskovanjem premaza na leseni podlagi

General Information

• Status: Published
• Publication Date: 22-Jun-2021
• ICS: 87.040 - Paints and varnishes
• Technical Committee: CEN/TC 139 - Paints and varnishes
• Drafting Committee: CEN/TC 139/WG 2 - Coating systems for wood
• Current Stage: 9060 - Closure of 2 Year Review Enquiry - Review Enquiry
• Start Date: 02-Dec-2024
• Completion Date: 02-Dec-2024
• Ref Project: SIST-TS CEN/TS 16360:2021 - Paints and varnishes - Coating materials and coating systems for exterior wood - Assessment of film extensibility by indentation of a coating on a wooden substrate

Relations

• Replaces: CEN/TS 16360:2012 - Paints and varnishes - Coating materials and coating systems for exterior wood - Assessment of film extensibility by indentation of a coating on a wooden substrate
• Effective Date: 30-Jun-2021

Standards Content (Sample)

SLOVENSKI STANDARD
01-september-2021
Nadomešča:
SIST-TS CEN/TS 16360:2012
Barve in laki - Premazi in premazni sistemi za zaščito lesa za zunanjo uporabo -
Ocenjevanje razteznosti filma z vtiskovanjem premaza na leseni podlagi
Paints and varnishes - Coating materials and coating systems for exterior wood -
Assessment of film extensibility by indentation of a coating on a wooden substrate
Beschichtungsstoffe - Beschichtungsstoffe und Beschichtungssysteme für Holz im
Außenbereich - Beurteilung der Verformbarkeit durch Eindrücken einer Beschichtung auf
einem Holzsubstrat
Peintures et vernis - Produits de peintures et systèmes de peintures pour bois en
extérieur - Évaluation de l'extensibilité du feuil par poinçonnement d'un revêtement sur
un support en bois
Ta slovenski standard je istoveten z: CEN/TS 16360:2021
ICS:
71.100.50 Kemikalije za zaščito lesa Wood-protecting chemicals
87.040 Barve in laki Paints and varnishes
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

CEN/TS 16360
TECHNICAL SPECIFICATION
SPÉCIFICATION TECHNIQUE
June 2021
TECHNISCHE SPEZIFIKATION
ICS 87.040 Supersedes CEN/TS 16360:2012
English Version
Paints and varnishes - Coating materials and coating
systems for exterior wood - Assessment of film
extensibility by indentation of a coating on a wooden
substrate
Peintures et vernis - Produits de peinture et systèmes Beschichtungsstoffe - Beschichtungsstoffe und
de peinture pour bois en extérieur - Évaluation de Beschichtungssysteme für Holz im Außenbereich -
l'extensibilité du feuil par poinçonnement d'un Beurteilung der Verformbarkeit durch Eindrücken
revêtement sur un support en bois einer Beschichtung auf einem Holzsubstrat
This Technical Specification (CEN/TS) was approved by CEN on 16 May 2021 for provisional application.

The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to
submit their comments, particularly on the question whether the CEN/TS can be converted into a European Standard.

CEN members are required to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS
available promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in
parallel to the CEN/TS) until the final decision about the possible conversion of the CEN/TS into an EN is reached.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN/TS 16360:2021 E
worldwide for CEN national Members.

Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Principle . 5
5 Apparatus . 5
6 Procedure. 7
6.1 Wood panels . 7
6.2 Coating application . 7
6.3 Assessment of film extensibility . 7
7 Test report . 8
Bibliography . 9

European foreword
This document (CEN/TS 16360:2021) has been prepared by Technical Committee CEN/TC 139 “Paints
and varnishes”, the secretariat of which is held by DIN.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes CEN/TS 16360:2012.
The main changes compared to the previous edition are as follows:
— the designation of the cones in Figure 1 and Table 1 has been changed from figures to letters;
— the speed of the testing machine has been changed from 8 mm/min. to (10±5) mm/min.;
— in 5.3 the magnification of the microscope has been changed from 50× to 10×;
— the size of the test panels has been changed;
— the number of tests has been changed from three to ten;
— a description of the cracked coating and a figure showing the appearance of concentric cracks in the
coating has been added;
— the text has been editorially revised and the normative references have been updated.
According to the CEN/CENELEC Internal Regulations, the national standards organisations of the
following countries are bound to announce this Technical Specification: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Introduction
A suitable extensibility of a coating film on wood in exterior use is of importance to follow dimensi
...