EN ISO 6360-7:2006

Dentistry - Number coding system for rotary instruments - Part 7: Specific characteristics of mandrels and special instruments (ISO 6360-7:2006)

ISO 6360-7:2006 specifies the code numbers for specific characteristics of mandrels and special instruments such as bone cutters, implant burs, trephines, wax scrapers and polishers. This three-digit number forms the fourth group of three digits in the 15-digit overall number, the principles of which are explained in ISO 6360-1 and ISO 6360-2.

Zahnheilkunde - Nummernsystem für rotierende Instrumente - Teil 7: Besondere Eigenschaften von Trägern und Spezialinstrumenten (ISO 6360-7:2006)

Dieser Teil von ISO 6360 enthält Kennzahlen für besondere Eigenschaften von Trägern und Spezialinstrumenten wie z. B. Knochenfräser, Implantatbohrer, Hohlschleifer, Wachsschaber und Polierer. Diese dreistellige Nummer bildet die vierte Gruppe mit drei Zahlen in der 15 -stelligen Gesamtnummer, deren Grundprinzipien in ISO 6360-1 und ISO 6360-2 beschrieben werden.
ANMERKUNG   Zusätzlich zu den Benennungen für rotierende Instrumente und Zubehör, die in zwei der drei offiziellen ISO-Sprachfassungen (Englisch, Französisch und Russisch) gegeben werden, enthält dieser Teil von ISO 6360 äquivalente Benennungen in der deutschen Sprache; diese erscheinen unter der Verantwortung des Mitgliedes für Deutschland (DIN). Nur die Benennungen in den offiziellen ISO-Sprachen dürfen können deshalb als ISO-Benennungen angesehen werden.

Art dentaire - Système de codification numérique pour instruments rotatifs - Partie 7: Caractéristiques spécifiques des mandrins et instruments spéciaux (ISO 6360-7:2006)

L'ISO 6360-7:2006 spécifie les codes numériques pour des caractéristiques spécifiques des mandrins et instruments spéciaux tels que fraises à os, forets pour implants, trépans, grattoirs à cire et instruments abrasifs.

Dentistry – Number coding system for rotary instruments – Part 7: Specific characteristics of mandrels and special instruments (ISO 6360-7:2006)

General Information

• Status: Published
• Publication Date: 31-Jan-2006
• ICS: 11.060.25 - Dental instruments
• Technical Committee: CEN/TC 55 - Dentistry
• Drafting Committee: CEN/TC 55 - Dentistry
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Start Date: 23-Feb-2010
• Completion Date: 23-Feb-2010
• Ref Project: SIST EN ISO 6360-7:2006 - Dentistry - Number coding system for rotary instruments - Part 7: Specific characteristics of mandrels and special instruments (ISO 6360-7:2006)

Standards Content (Sample)

SLOVENSKI STANDARD
01-april-2006
Dentistry – Number coding system for rotary instruments – Part 7: Specific
characteristics of mandrels and special instruments (ISO 6360-7:2006)
Dentistry - Number coding system for rotary instruments - Part 7: Specific characteristics
of mandrels and special instruments (ISO 6360-7:2006)
Zahnheilkunde - Nummernsystem für rotierende Instrumente - Teil 7: Besondere
Eigenschaften von Trägern und Spezialinstrumenten (ISO 6360-7:2006)
Art dentaire - Systeme de codification numérique pour instruments rotatifs - Partie 7:
Caractéristiques spécifiques des mandrins et instruments spéciaux (ISO 6360-7:2006)
Ta slovenski standard je istoveten z: EN ISO 6360-7:2006
ICS:
11.060.25 =RERWHKQLþQLLQVWUXPHQWL Dental instruments
35.040 Nabori znakov in kodiranje Character sets and
informacij information coding
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN ISO 6360-7
NORME EUROPÉENNE
EUROPÄISCHE NORM
February 2006
ICS 11.060.25
English Version
Dentistry - Number coding system for rotary instruments - Part 7:
Specific characteristics of mandrels and special instruments
(ISO 6360-7:2006)
Art dentaire - Système de codification numérique pour Zahnheilkunde - Nummernsystem für rotierende
instruments rotatifs - Partie 7: Caractéristiques spécifiques Instrumente - Teil 7: Besondere Eigenschaften von Trägern
des mandrins et instruments spéciaux (ISO 6360-7:2006) und Spezialinstrumenten (ISO 6360-7:2006)
This European Standard was approved by CEN on 16 January 2006.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,
Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2006 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 6360-7:2006: E
worldwide for CEN national Members.

Foreword
This document (EN ISO 6360-7:2006) has been prepared by Technical Committee ISO/TC 106
"Dentistry" in collaboration with Technical Committee CEN/TC 55 "Dentistry", the secretariat of
which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by August 2006, and conflicting national
standards shall be withdrawn at the latest by August 2006.

According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,
Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.

Endorsement notice
The text of ISO 6360-7:2006 has been approved by CEN as EN ISO 6360-7:2006 without any
modifications.
INTERNATIONAL ISO
STANDARD 6360-7
First edition
2006-02-01
Dentistry — Number coding system
for rotary instruments —
Part 7:
Specific characteristics of mandrels
and special instruments
Art dentaire — Système de codification numérique pour instruments
rotatifs —
Partie 7: Caractéristiques spécifiques des mandrins et instruments
spéciaux
Reference number
ISO 6360-7:2006(E)
©
ISO 2006
ISO 6360-7:2006(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.

©  ISO 2006
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Published in Switzerland
ii © ISO 2006 – All rights reserved

ISO 6360-7:2006(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 6360-7 was prepared by Technical Committee ISO/TC 106, Dentistry, Subcommittee SC 4, Dental
instruments.
ISO 6360 consists of the following parts, under the general title Dentistry — Number coding system for rotary
instruments:
⎯ Part 1: General characteristics
⎯ Part 2: Shapes
⎯ Part 3: Specific characteristics of burs and cutters
⎯ Part 4: Specific characteris
...