Dentistry - Endodontic instruments - Part 1: General requirements (ISO 3630-1:2019)

This document specifies general requirements and test methods for endodontic instruments used for endodontic purposes, e.g. enlargers, compactors, accessory instruments, shaping and cleaning instruments, and a numeric coding system. In addition, it covers general size designations, color-coding, packaging, and identification symbols.

Zahnheilkunde - Endodontische Instrumente - Teil 1: Allgemeine Anforderungen (ISO 3630-1:2019)

Diese Dokument legt allgemeine Anforderungen an und Prüfverfahren für endodontische Instrumente, die für endodontische Anwendungen verwendet werden, z. B. Erweiterer, Kompaktoren, Hilfsinstrumente, Form- und Reinigungsinstrumente sowie Nummernsystem fest. Zusätzlich beschreibt es allgemeine Größen¬bezeichnungen, Farbkennzeichnung, Verpackung und Identifikationssymbole.

Médecine bucco-dentaire - Instruments d'endodontie - Partie 1: Exigences générales (ISO 3630-1:2019)

Le présent document spécifie les exigences générales et les méthodes d'essai relatives aux instruments d'endodontie utilisés en endodontie, par exemple les élargisseurs, les compacteurs, les instruments auxiliaires, les instruments de mise en forme et de nettoyage et le système de codification numérique. En outre, il couvre les désignations générales de dimensions, le code de couleurs, l'emballage et les symboles d'identification.

Zobozdravstvo - Endodontski instrumenti - 1. del: Splošne zahteve (ISO 3630-1:2019)

Ta dokument določa splošne zahteve in preskusne metode za endodontske instrumente, ki se uporabljajo v endodontske namene, npr. za razširjevalnike, kompaktorje, pribor, instrumente za oblikovanje in čiščenje ter sistem za številsko označevanje. Poleg tega zajema splošne oznake velikosti, barvno označevanje, pakiranje in identifikacijske simbole.

General Information

Status
Published
Publication Date
08-Oct-2019
Withdrawal Date
29-Apr-2020
Technical Committee
Drafting Committee
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
09-Oct-2019
Completion Date
09-Oct-2019

Relations

Buy Standard

Standard
EN ISO 3630-1:2019
English language
29 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-december-2019
Nadomešča:
SIST EN ISO 3630-1:2008
Zobozdravstvo - Endodontski instrumenti - 1. del: Splošne zahteve (ISO 3630-
1:2019)
Dentistry - Endodontic instruments - Part 1: General requirements (ISO 3630-1:2019)
Zahnheilkunde - Endodontische Instrumente - Teil 1: Allgemeine Anforderungen (ISO
3630-1:2019)
Médecine bucco-dentaire - Instruments d'endodontie - Partie 1: Exigences générales
(ISO 3630-1:2019)
Ta slovenski standard je istoveten z: EN ISO 3630-1:2019
ICS:
11.060.25 Zobotehnični instrumenti Dental instruments
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 3630-1
EUROPEAN STANDARD
NORME EUROPÉENNE
October 2019
EUROPÄISCHE NORM
ICS 11.060.20 Supersedes EN ISO 3630-1:2008
English Version
Dentistry - Endodontic instruments - Part 1: General
requirements (ISO 3630-1:2019)
Médecine bucco-dentaire - Instruments d'endodontie - Zahnheilkunde - Endodontische Instrumente - Teil 1:
Partie 1: Exigences générales (ISO 3630-1:2019) Allgemeine Anforderungen (ISO 3630-1:2019)
This European Standard was approved by CEN on 4 June 2019.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 3630-1:2019 E
worldwide for CEN national Members.

Contents Page
European foreword . 3

European foreword
This document (EN ISO 3630-1:2019) has been prepared by Technical Committee ISO/TC 106
"Dentistry" in collaboration with Technical Committee CEN/TC 55 “Dentistry” the secretariat of which
is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by April 2020, and conflicting national standards shall be
withdrawn at the latest by April 2020.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 3630-1:2008.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 3630-1:2019 has been approved by CEN as EN ISO 3630-1:2019 without any
modification.
INTERNATIONAL ISO
STANDARD 3630-1
Third edition
2019-08
Dentistry — Endodontic
instruments —
Part 1:
General requirements
Médecine bucco-dentaire — Instruments d'endodontie —
Partie 1: Exigences générales
Reference number
ISO 3630-1:2019(E)
©
ISO 2019
ISO 3630-1:2019(E)
© ISO 2019
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2019 – All rights reserved

ISO 3630-1:2019(E)
Contents Page
Foreword .v
Introduction .vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
3.1 Terms and definitions . 2
3.2 Symbols . 3
4 Classification . 3
5 Requirements . 3
5.1 General . 3
5.2 Type 1: Standard instruments . 3
5.2.1 Length. 3
5.2.2 Size designation and diameters . 4
5.2.3 Colour designation . 4
5.2.4 Tip shape . 4
5.2.5 Tip length . 5
5.3 Type 2: Taper instruments. 5
5.3.1 Length. 5
5.3.2 Tip shape . 5
5.3.3 Size designation . 6
5.3.4 Designation and diameters . 6
5.3.5 Taper designation . 6
5.3.6 Diameter colour identification. 6
5.3.7 Taper colour and ring identification . 7
5.4 Type 3: Non-taper instruments . 7
5.4.1 Length. 7
5.4.2 Size designation and diameters . 7
5.4.3 Colour designation . 7
5.5 Type 4: Non-uniform taper instruments . 8
5.5.1 Length. 8
5.5.2 Tip length and angle . 8
5.5.3 Size designation . 8
5.5.4 Diameter designation and diameters . 8
5.5.5 Diameter colour identification. 9
5.5.6 Taper colour and ring identification . 9
5.6 Type 5: Shape instruments . 9
5.6.1 Length. 9
5.6.2 Size designation and diameters . 9
5.6.3 Colour designation . 9
5.7 Material . 9
5.8 Dimensions .10
5.8.1 General.10
5.8.2 Length.10
5.8.3 Handle and shank .10
5.9 Mechanical requirements .11
5.9.1 Resistance to fracture by twisting and angular deflection .11
5.9.2 Stiffness (Resistance to bending) .11
5.9.3 Handle and shank security .11
5.10 Reprocessing .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.